Loading...
Search for:
rouhi--zahra
0.12 seconds
Total 147 records
Implementation and Evaluation of P3M3 and Wysocki Maturity Models in the South Pars Projects and Presenting Improvement Projects
, M.Sc. Thesis Sharif University of Technology ; Shadrokh, Shahram (Supervisor)
Abstract
This thesis represents results of research about portfolio, program and project management maturity level in South Pars Projects’ contractor organizations. The purpose is to develop an understanding of management maturity regarding these three levels and especially project management in these organizations. Since oil and gas projects have major role in our economy, doing such appraisals cause cost deduction and increasing productivity in these organizations. In this research, contractor organizations and samples from South Pars Projects have been chosen, and then based on P3M3 and Wysocki Maturity Models, which is based on PMBOK standard, and by using their questionnaires appraisal has been...
Solid Phase Dynamic Extraction Based on Polypyrrole Fiber for Determination Trace Amount of Atrazine in Aqueous Samples with GC-MS
, M.Sc. Thesis Sharif University of Technology ; Bagheri, Habib (Supervisor)
Abstract
This research is a bout a novel sample prepration procedure that used polypyrrole film into a stainless steel needle as a fiber coating for solid phase dynamic extraction(SPDE) with using a home-made SPDE devise and gas chromatography – mass spectroscopy for the extraction and detectionof Atrazine from the aqueous sample in direct mode of SPDE. Polypyrrole film was directly electrodeposited into the needle in a aqueous sodium dodecyl sulfonate solution with pecial set up in optimom condition of potential, time and concentration of polypyrrole. To enhance the sensitivity of the SPDE , variables affecting adsorption and desorption steps such as temperature,time,PH, flowrate and ionic strength...
Using a truss-inspired model with the uniform strength optimization theory to predict spongy bone geometry in proximal femur
, Article American Journal of Applied Sciences ; Volume 6, Issue 3 , 2009 , Pages 449-455 ; 15469239 (ISSN) ; Farahmand, F ; Rouhi, G. R ; Sharif University of Technology
2009
Abstract
This paper presents a new naïve approach for simulating bone remodeling process. It is based on the uniform strength theory of optimization and employs a truss-like model for bone. The truss was subjected to external loads including 5 point loads simulating the hip joint contact forces and 3 muscular forces at the attachment sites of the muscles to the bone and the rest are reactions of ligaments. The strain in the links was calculated and the links with high strains were identified. The initial truss is modified by introducing new links wherever the strain exceeds a prescribed or critical value. The critical value was assumed to be equal to an average of the absolute value of strains in the...
Benign and malignant breast tumors classification based on region growing and CNN segmentation
, Article Expert Systems with Applications ; Volume 42, Issue 3 , February , 2014 , Pages 990-1002 ; 09574174 (ISSN) ; Jafari, M ; Kasaei, S ; Keshavarzian, P ; Sharif University of Technology
Elsevier Ltd
2014
Abstract
Breast cancer is regarded as one of the most frequent mortality causes among women. As early detection of breast cancer increases the survival chance, creation of a system to diagnose suspicious masses in mammograms is important. In this paper, two automated methods are presented to diagnose mass types of benign and malignant in mammograms. In the first proposed method, segmentation is done using an automated region growing whose threshold is obtained by a trained artificial neural network (ANN). In the second proposed method, segmentation is performed by a cellular neural network (CNN) whose parameters are determined by a genetic algorithm (GA). Intensity, textural, and shape features are...
Can the body slope of interference screw affect initial stability of reconstructed anterior cruciate ligament?: An in-vitro investigation
, Article BMC Musculoskeletal Disorders ; Volume 22, Issue 1 , 2021 ; 14712474 (ISSN) ; Chizari, M ; Mortazavi, J ; Rouhi, G ; Sharif University of Technology
BioMed Central Ltd
2021
Abstract
Background: Superior biomechanical performance of tapered interference screws, compared with non-tapered screws, with reference to the anterior cruciate ligament (ACL) reconstruction process, has been reported in the literature. However, the effect of tapered interference screw’s body slope on the initial stability of ACL is poorly understood. Thus, the main goal of this study was to investigate the effect of the interference screw’s body slope on the initial stability of the reconstructed ACL. Methods: Based on the best screw-bone tunnel diameter ratios in non-tapered screws, two different tapered interference screws were designed and fabricated. The diameters of both screws were equal to...
The corrosion investigation of rebar embedded in the fibers reinforced concrete
, Article Construction and Building Materials ; Volume 35 , October , 2012 , Pages 564-570 ; 09500618 (ISSN) ; Akil, H. M ; Dolati, A ; Rouhi, J ; Sharif University of Technology
Elsevier
2012
Abstract
One effective method for preventing corrosion of steel reinforcement and improving the mechanical properties of concrete is changing the physical nature of concrete by adding different materials. In this study, we have used polypropylene fibers as an additional material. We have compared the corrosion rate of rebar using different volume ratios and sizes of polypropylene fibers. Reinforcement potential increased as the amount of fibers increased from 0 to 2 kg m -3. The polypropylene fibers delay the initial corrosion process by preventing cracking, thereby decreasing permeability of the concrete. In addition, the corrosion rate of concrete samples made with Kish Island coral aggregate was...
Prediction of shape and internal structure of the proximal femur using a modified level set method for structural topology optimisation
, Article Computer Methods in Biomechanics and Biomedical Engineering ; Volume 15, Issue 8 , 2012 , Pages 835-844 ; 10255842 (ISSN) ; Farahmand, F ; Rouhi, G ; Movahhedy, M. R ; Sharif University of Technology
2012
Abstract
A computational framework was developed to simulate the bone remodelling process as a structural topology optimisation problem. The mathematical formulation of the Level Set technique was extended and then implemented into a coronal plane model of the proximal femur to simulate the remodelling of internal structure and external geometry of bone into the optimal state. Results indicated that the proposed approach could reasonably mimic the major geometrical and material features of the natural bone. Simulation of the internal bone remodelling on the typical gross shape of the proximal femur, resulted in a density distribution pattern with good consistency with that of the natural bone. When...
Modeling the size dependent pull-in instability of cantilever nano-switch immersed in ionic liquid electrolytes using strain gradient theory
, Article Scientia Iranica ; Volume 23, Issue 3 , 2016 , Pages 976-989 ; 10263098 (ISSN) ; Koochi, A ; Farahani, M ; Rouhi, E ; Abadyan, M ; Sharif University of Technology
Sharif University of Technology
2016
Abstract
It is well recognized that size-effect often plays a significant role in the mechanical performance of nano-structures. Herein, strain gradient continuum elasticity is employed to investigate the size dependent pull-in instability of the cantilever nanoactuators immersed in ionic liquid electrolyte. The presence of dispersion forces, i.e. Casimir and van der Waals field, is considered in the theoretical model as well as the double-layer electrochemical attraction. To solve the non-linear constitutive equation of the system, two approaches, i.e. the Rayleigh Ritz Method (RRM) and the numerical solution method, are employed. Impact of the size dependency and dispersion forces on the...
Early post-operative performance of an anatomically designed hybrid thread interference screw for ACL reconstruction: A comparative study
, Article Journal of Biomechanics ; Volume 135 , 2022 ; 00219290 (ISSN) ; Chizari, M ; Javad Mortazavi, S. M ; Rouhi, G ; Sharif University of Technology
Elsevier Ltd
2022
Abstract
Although the anterior cruciate ligament (ACL) reconstruction using interference screw is a well-accepted surgical procedure, patients still suffer graft failure in the initial rehabilitation phase. Graft fixation stability of a newly designed anatomical hybrid thread tapered interference screw (AHTTIS) was compared with a conventional standard one (CSIS) by conducting in-vitro mechanical tests. According to the CSIS manufacturer's instruction, eight tapered bone tunnels, matching AHTTIS geometry, and eight straight cylindrical tunnels were drilled in artificial bone blocks. Bovine tendon grafts were fixed using AHTTIS and CSIS in their corresponding bone tunnels. Each graft was subjected to...
Mesoporous silica nanoparticles (MCM-41) coated PEGylated chitosan as a pH-Responsive nanocarrier for triggered release of erythromycin [electronic resource]
, Article International Journal of Polymeric Materials and Polymeric Biomaterials ; 2014, Volume 63, Issue 13, Pages 692-697 ; Mazaheri Tehrani, Zahra ; Sharif University of Technology
Abstract
A pH-responsive drug delivery system based on core shell structure of mesoporous silica nanoparticle (MSN) and chitosan-PEG copolymer was prepared and characterized by Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), scanning electron microscope (SEM), and high-resolution transmission microscope (HR-TEM) techniques. In order to improve compatibility MSN and drug, mesoporous nanosilica was modified by 3-aminopropyl triethoxysilane. The release of erythromycin (a macrolide antibiotic) as a model drug was investigated in two pHs, 7.4 and 5.5
Using Nonlinear Effects of Light for Optical Signal Processing
, M.Sc. Thesis Sharif University of Technology ; Kavehvash, Zahra (Supervisor)
Abstract
Ultrafast signal processing in time-domain with high resolution and reconfigura-bility is a challenging task. This paper, for the first time, introduces a time-varying metasurface consisting of graphene microribbon array for implementing time-lens in the terahertz domain. Given that the surface conductivity of graphene is proportional to the Fermi energy level in the THz regime, it is possible to change the phase property of the incident electromagnetic pulse by changing the Fermi level while the Fermi level itself is a function of voltage. Upon this fact, a quadratic temporal phase modulator, namely time-lens has been realized. This phase modulation is applied to the impinging signal in the...
Theoretical and Computational Investigation of Quantum Plasmonic Properties of Nanocluster Dimers
, M.Sc. Thesis Sharif University of Technology ; Jamshidi, Zahra (Supervisor)
Abstract
In today's era, metal nanoparticles play an important role in technologies emerging from different sciences, such as chemistry, physics, optics, material science, due to their unique characteristics. In the development of nanooptics science, it can be said that metal nanoparticles play an important role. The ability of conductive electrons collective oscillation causes surface charge density fluctuations in nanoparticles, this phenomenon is known as surface plasmons. Surface plasmons are surprisingly coupled with light and cause the significant increase in the intensity of optical fields induced in nanoparticles. Therefore, with the presence of localized surface plasmons or plasmon...
Theoretical Investigation of Ab-initio MD Approach to Increase the Efficiency and Accuracy of VCD Spectrum Calculation
, M.Sc. Thesis Sharif University of Technology ; Jamshidi, Zahra (Supervisor)
Abstract
Understanding of the Molecules is the main purpose of the chemistry. Ab-initio molecular dynamics (AIMD) as a branch of the computational chemistry, tries to give us a deep comprehension of the molecule, and its chemical, physical and optical activities. This comprehension, relies on the accuracy of quantum mechanics, in addition to the speed of the classical mechanics. The mixing of the quantum mechanics and the classical mechanics could simulate activities of the atoms in the time-domain, provided the mixing is done with precaution. This, in turn, helps us to forecast the response of a molecule in different situations, and also translating the macroscopic phenomena in a nanoscopic...
Investigation of Plasmonic Excitation in Carbonic Nanostructures Within Near-IR
, M.Sc. Thesis Sharif University of Technology ; Jamshidi, Zahra (Supervisor)
Abstract
To date, the plasmonic properties of many metallic and semi-conducting materials have been investigated and used in various industries. One of the plasmonic material categories that have always been considered is polycyclic aromatic hydrocarbon or PAH, whose plasmonic resonance energy depends on the charge state of the molecule. In this regard, it is easy to change the plasmonic resonance energy via changing the induced charge, which is a unique feature of the mentioned materials. In addition, plasmonic structures with excitations in the infrared region are able to enhance the vibration intensity of absorbed molecules by increasing the electric field around themselves. Therefore, they have...
Using Simulation-Optimization Approach for Fire Station Location and Vehicle Assignment Problem: a Case Study in Tehran, Iran
, M.Sc. Thesis Sharif University of Technology ; Amini, Zahra (Supervisor)
Abstract
In this research, the problem of locating fire stations and allocating equipment has been studied and a simulation-optimization approach has been presented to solve the problem. The mathematical models of this research were developed based on the idea of the randomness of the covered demand and the maximum expected coverage model. In these models, the issue of non-availability of equipment to cover accidents, the random nature of accidents, various fire incidents and the equipment needed to cover them are considered. Two mathematical models with deterministic and non-deterministic approach with different scenarios for demand are proposed. The non-deterministic model is developed with the aim...
Introducing An Integrated Framework For Solving The Fleet Planning Problem Using A Simulation-Optimization Approach
, M.Sc. Thesis Sharif University of Technology ; Amini, Zahra (Supervisor)
Abstract
One of the main concerns of industrial companies’ managers is providing an efficient logistics system. To achieve an efficient logistics system, the fleet planning problem is studied by many researchers in recent years. This problem consists of multiple sub-problems at three levels: operational, tactical, and strategic. These sub-problems are closely related to each other and need to be studied and addressed in an integrated manner. In this research, an attempt is made to provide an integrated framework to solve the vehicle routing problem (operational), outsourcing problem (tactical), and fleet composition problem (strategic). These problems have various uncertainties, including customer...
Analytical Modelling and Optimization of Disk Type, Slot Less Resolver
, M.Sc. Thesis Sharif University of Technology ; Nasiri Gheidari, Zahra (Supervisor)
Abstract
Resolvers, due to their robust structure, are widely used in automation systems. Among the types of resolvers, the accuracy of the Wound Rotor (WR) resolver in the occurrence of common mechanical errors is higher than other types of resolvers. therefore, in this thesis, an AFWRR is studied to improve the performance. Increasing the number of poles in WR resolvers is a good solution for increasing the accuracy of these electromagnetic position sensors. However, high-speed WR resolvers due to employing fractional slot windings suffer from rich sub-harmonics in the induced voltages. A common solution for suppressing the undesirable sub-harmonics is using multi-layer winding with appropriate...
A Survey on Searchable Symmetric Encryption Schemes
, M.Sc. Thesis Sharif University of Technology ; Khazaei, Shahram (Supervisor)
Abstract
Using “Searchable Encryption” enables us to encrypt the data, while preserving the possibility of running search queries. One of the most important applications of the mentioned is in Cloud Storage. As users do not trust the Cloud space, they are not inclined to store their data on the Could. The solution to this problem is of course, Cryptography. However, ordinary Cryptography methods, eliminate the data’s searchability. Hence, we need encryption schemes that code the data while retaining their searchability. So far, various schemes has been proposed that differ in their performance, security level, and usage. In this thesis, we aim to discuss and analyze these methods
Temporal Depth Imaging Based on Dispersion
, M.Sc. Thesis Sharif University of Technology ; Kavehvash, Zahra (Supervisor)
Abstract
In this thesis, the aim is designing an optical temporal imaging system. In recent years, due to many applications, including the receipt of high-rate data by slow receivers and compensation of dispersion in telecommunication systems, researchers have considered the topic of temporal imaging. This field of research is based on dispersion, electro-optical modulators or time lenses and space-time theory. By modeling dispersion properties as a depth dimension and taking ideas from three-dimensional spatial imaging systems we intended to increase the temporal resolution and depth of focus of the structure. We also present a novel technique for multiplexing and demultiplexing telecommunication...
Time Domain Optical Signal Processing Based on the Duality Between Dispersion and Diffraction
, M.Sc. Thesis Sharif University of Technology ; Kavehvash, Zahra (Supervisor)
Abstract
In the last decades, due to the growing demand of transferring information with high transmission rates, the complexity and development of telecommunication and optical systems is remarkable. Researchers around the world attempt to explore extraordinary potential of light to process information. In the mid-19th century, scientists discovered a mathematical symmetry between the spatial and temporal optics fields, which originated from the similarity of equations governing the paraxial diffraction of beams and the dispersion of narrow-band pulses known as space– time duality in scientific texts. This new approach provides more advanced and potent methods to temporal processing and...