Loading...
Search for: saadatmand--f--s
2.085 seconds

    TAMER: an adaptive task allocation method for aging reduction in multi-core embedded real-time systems

    , Article Journal of Supercomputing ; 2020 Saadatmand, F. S ; Rohbani, N ; Baharvand, F ; Farbeh, H ; Sharif University of Technology
    Springer  2020
    Abstract
    Technology scaling has exacerbated the aging impact on the performance and reliability of integrated circuits. By entering into nanotechnology era in recent years, the power density per unit of area has increased, which leads to a higher chip temperature. Aging in a chip is originated from multiple phenomena; all of them are intensified by increased temperature. Several circuit- and architecture-level schemes tried to mitigate the aging in the literature. However, these schemes are not sufficient for multi-core systems due to their unawareness of the unique constraints and features of these platforms. In this paper, we propose a system-level aging mitigation method, so-called Adaptive Task... 

    TAMER: an adaptive task allocation method for aging reduction in multi-core embedded real-time systems

    , Article Journal of Supercomputing ; Volume 77, Issue 2 , 2021 , Pages 1939-1957 ; 09208542 (ISSN) Saadatmand, F. S ; Rohbani, N ; Baharvand, F ; Farbeh, H ; Sharif University of Technology
    Springer  2021
    Abstract
    Technology scaling has exacerbated the aging impact on the performance and reliability of integrated circuits. By entering into nanotechnology era in recent years, the power density per unit of area has increased, which leads to a higher chip temperature. Aging in a chip is originated from multiple phenomena; all of them are intensified by increased temperature. Several circuit- and architecture-level schemes tried to mitigate the aging in the literature. However, these schemes are not sufficient for multi-core systems due to their unawareness of the unique constraints and features of these platforms. In this paper, we propose a system-level aging mitigation method, so-called Adaptive Task... 

    Fabrication, modeling and optimization of lyophilized advanced platelet rich fibrin in combination with collagen-chitosan as a guided bone regeneration membrane

    , Article International Journal of Biological Macromolecules ; Volume 125 , 2019 , Pages 383-391 ; 01418130 (ISSN) Ansarizadeh, M ; Mashayekhan, S ; Saadatmand, M ; Sharif University of Technology
    Elsevier B.V  2019
    Abstract
    In this study, lyophilized advanced platelet rich fibrin (A-PRF) was used in combination with collagen-chitosan membrane for the first time to combine advantages of both collagen and A-PRF membranes. Response surface methodology (RSM) was used to design the experimental condition and to correlate the effects of parameters, including chitosan/collagen (chit/col) weight ratio and A-PRF concentration on Young's modulus, mesenchymal stem cell (MSCs) viability and degradation rate of the membranes. Results showed that Young's modulus of the membranes was intensified by increasing chit/col weight ratio and decreasing A-PRF concentration from 3 to 8 MPa. Cell viability of MSCs was improved by both... 

    Empirical modeling of mechanical properties of modified collagen/chitosan membrane by response surface methodology

    , Article 24th Iranian Conference on Biomedical Engineering and 2017 2nd International Iranian Conference on Biomedical Engineering, ICBME 2017, 30 November 2017 through 1 December 2017 ; 2018 ; 9781538636091 (ISBN) Ansarizadeh, M ; Mashayekhan, S ; Saadatmand, M ; Khashabi, E ; Sharif University of Technology
    Institute of Electrical and Electronics Engineers Inc  2018
    Abstract
    In this study, collagen/chitosan membrane used for guided bone regeneration (GBR) was modified. Collagen and chitosan are routinely used in GBR membrane fabrication. In addition advanced platelet rich fibrin (A-PRF) is a promising substitution for fabricating membrane in dental surgery. Herein, acid soluble collagen from calf skin was extracted and characterized. The combination of A-PRF with collagen/chitosan membrane was investigated in this study. FTIR analysis revealed that chemical crosslinking using EDC/NHS was occurred. The morphology of collagen/chitosan membrane in a gradient manner of chitosan was assessed via SEM images. Response surface methodology (RSM) was used to... 

    Design of Microfluidic Chip for 3D Cell Culture

    , M.Sc. Thesis Sharif University of Technology Ghobadi, Faezeh (Author) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Understanding biological systems requires extensive knowledge of individual parameters, and to study the processes of cell differentiation and cell behavior, a suitable environment must be created with the physiological conditions of the human body. For this purpose, with the knowledge of microfluidics, a microenvironment can be provided to study the behavior of cells on a small scale. The use of bone tissue model microfluidic chips is an alternative and new method in which it is possible to study the behavior of cells to differentiate into bone and to examine the toxicity of drugs, which in itself can help in the effective and successful treatment of these cases show. Therefore, in this... 

    Fabrication the Hydrogel Microfibers Using Bioprinter with Application in Cardiovascular Model

    , M.Sc. Thesis Sharif University of Technology Heidari, Faranak (Author) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Cardiovascular disease (CVD) currently remains a considerable challenge for clinical treatments. CVDs account for N17.5 million deaths per year and will predictably increase to 23.6 million by 2030. The main purpose is to create human model systems to study the effect of disease mutations or drug treatment on the heart. In addition, engineered cardiac tissues are considered promising candidates to be transplanted to improve the function of diseased hearts. For engineered active tissues/organs, 3D bioprinting can fabricate complex tissue architecture with a spatiotemporal distribution of bioactive substances (cells, growth factors, and others) to better guide tissue regeneration. However,... 

    Fabrication of Thick Scaffold with Microfluidic Channels by Bioprinter

    , M.Sc. Thesis Sharif University of Technology Khalighi, Sadaf (Author) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Cardiovascular diseases are among the leading causes of death worldwide. For instance, in 2015, almost 31% of the world’s mortality rate was due to these causes. One of these diseases is cardiac coronary vessels’ occlusion which leads to the insufficient blood supply to the heart tissue and cardiomyocytes death after Myocardial Infarction (MI). After MI, a hierarchy of events in the heart tissue changes heart muscle and forms cardiac fibrosis. This fibrotic tissue does not have the native one’s properties and function, so it will cause cardiac arrest and patient death. Therefore, it is obvious that vascular network plays a crucial role in the heart function. The importance of cardiac... 

    Three-dimensional simulation of urine concentrating mechanism in a functional unit of rat outer medulla. I. Model structure and base case results

    , Article Mathematical Biosciences ; Vol. 258 , 2014 , pp. 44-56 ; ISSN: 00255564 Sohrabi, S ; Saidi, M. S ; Saadatmand, M ; Banazadeh, M. H ; Firoozabadi, B ; Sharif University of Technology
    2014
    Abstract
    The urine formation and excretion system have long been of interest for mathematicians and physiologists to elucidate the obscurities within the process happens in renal tissue. In this study, a novel three-dimensional approach is utilized for modeling the urine concentrating mechanism in rat renal outer medulla which is essentially focused on demonstrating the significance of tubule's architecture revealed in anatomic studies and physiological literature. Since nephrons and vasculatures work interdependently through a highly structured arrangement in outer medulla which is dominated by vascular bundles, a detailed functional unit is proposed based on this specific configuration.... 

    A Task Assignment Method to Reduce Aging in Multi-core Processors

    , M.Sc. Thesis Sharif University of Technology Saadatmand, Faezeh Sadat (Author) ; Miremadi, Ghassem (Supervisor)
    Abstract
    Reducing the size of transistors has dramatically increased the impacts of NBTI, HCI, and EM phenomena in comparison with decade ago. These phenomena are able to have influence on properties of different parts of a chip to make it changed gradually; including threshold voltage of a transistor and electrical conductivity of interconnections. These changes are known as the aging of a transistors that diminish the performance and reliability of a chip. A common reason that plays a significant role in all these phenomena is temperature. The temperature becomes more important when the power density increases per unit area due to decreased size of transistors, which is a trend in multi-core... 

    Design of Scaffolds with Multi-scale Engineered Microchannels

    , M.Sc. Thesis Sharif University of Technology Mollajavadi, Mohammad Yasin (Author) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Building complex and functional tissues and organs is very challenging. One of the challenges is building an efficient network of blood vessels that can be used to facilitate the transport of nutrients and oxygen to the host. In addition to using channels for oxygen supply, another solution is to use oxygen-carrying materials. In this study, in addition to designing and simulating scaffolds with multi-scale microchannels, calcium peroxide was used to release oxygen and eliminate hypoxia in the scaffold. Here alginate is used as the main material for scaffolding. In an attempt to build a scaffold using a bio-printer, pluronic acid was also used as a sacrificial material to create canals.... 

    Design and Fabrication of Microfluidic System as Concentration Gradient Generator

    , M.Sc. Thesis Sharif University of Technology Ziabakhsh, Zeinab Sadat (Author) ; Saadatmand, Maryam (Supervisor)
    Abstract
    According to today’s medicine progress, the need for improving the medical facilities have been increased. Within the human body, the biomolecules concentration gradient is regulating the cell functions. Biological processes such as immune response, wound healing, and cancer metastasis have been affected by the bimolecular concentration gradient. So understanding the cell behavior in the presence of a chemical gradient can improve the understanding from these biological processes, and also would help in medical researches. On the other hand, finding the appropriate dose of the drugs and in some cases finding the most effective drug is a clinical challenge that made a new field of research in... 

    Urine Analysis by a Microfluidic Paper-Based Device for Renal Function Test

    , M.Sc. Thesis Sharif University of Technology Pourghanbari Marvast, Mohadeseh (Author) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Chronic kidney disease is one of the silent diseases that progresses slowly, often without symptoms, and can eventually lead to kidney loss. Early detection of this disease can help diagnose it and prevent further problems. Urinary creatinine is an effective biomarker for early diagnosis of chronic kidney disease, but methods available in clinics are problematic for people living in disadvantaged areas because of the high cost and the need for 24-hour urine collection. Currently, paper-based microfluidic devices are being developed because they are easy to manufacture, inexpensive, the fluid is permeable by capillary force, and no additional equipment is needed. In this work, to fabricate a... 

    Theoretical study of diffusional release of a dispersed solute from cylindrical polymeric matrix: A novel configuration for providing zero-order release profile

    , Article Applied Mathematical Modelling ; Volume 73 , 2019 , Pages 136-145 ; 0307904X (ISSN) Khorrami Jahromi, A ; Shieh, H ; Saadatmand, M ; Sharif University of Technology
    Elsevier Inc  2019
    Abstract
    In the context of controlled release drug delivery approaches, the systems providing zero-order release kinetics have special advantages. Through employing these systems, drug concentration could be maintained within the therapeutic window over release time; thus maximum effectiveness alongside minimized side effects of the drug are achieved. However, obtaining zero-order drug release is extremely challenging. One of the main obstacles is the fact that implemented devices should be designed to overcome the decreasing mass transfer driving force, especially, in polymeric systems in which diffusion mechanism is dominant. In this study, we developed a new configuration of a polymeric matrix... 

    The influence of the female reproductive tract and sperm features on the design of microfluidic sperm-sorting devices

    , Article Journal of Assisted Reproduction and Genetics ; Volume 39, Issue 1 , 2022 , Pages 19-36 ; 10580468 (ISSN) Ahmadkhani, N ; Hosseini, M ; Saadatmand, M ; Abbaspourrad, A ; Sharif University of Technology
    Springer  2022
    Abstract
    Although medical advancements have successfully helped a lot of couples with their infertility by assisted reproductive technologies (ART), sperm selection, a crucial stage in ART, has remained challenging. Therefore, we aimed to investigate novel sperm separation methods, specifically microfluidic systems, as they do sperm selection based on sperm and/or the female reproductive tract (FRT) features without inflicting any damage to the selected sperm during the process. In this review, after an exhaustive studying of FRT features, which can implement by microfluidics devices, the focus was centered on sperm selection and investigation devices. During this study, we tried not to only point to... 

    Design of Amniotic Membrane-based Hydrogel for Cardiac Tissue Engineering Application

    , M.Sc. Thesis Sharif University of Technology Gholami, Bahar (Author) ; Yaghmaei, Sohila (Supervisor) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Mammalian cardiac tissue lacks the ability to effectively self-regenerate following severe damage. The application of external therapeutic agents with strong mechanical properties is needed to restore its function. Even though conventional therapies have several challenges and limitations, injectable hydrogels, with minimally invasive, can significantly improve cardiac tissue regeneration. Extracellular matrices are the most appropriate biomaterials for synthesizing cardiac scaffolds. The human amniotic membrane obtained from the amniotic sac is a readily available, abundant, and inexpensive candidate that has been successfully utilized for the clinical treatment of cardiac diseases.... 

    Fabrication of a Centrifugal Microfluidic System for Cell-free DNA Isolation from whole Blood as a Biomarker

    , M.Sc. Thesis Sharif University of Technology Hatami, Ali (Author) ; Saadatmand, Maryam (Supervisor) ; Garshasbi, Masoud (Co-Supervisor)
    Abstract
    Today, medical science has come to the conclusion that the best time to start treating a disease is in its early stages. Therefore, the topic of early detection has been widely welcomed in scientific circles. Today, one of the safest methods for early detection in medicine is the study of biomarkers. These biomarkers include CTC, cfRNA, cfDNA, Exosome, etc. For instance, in the discussion of early cancer detection, the US Food and Drug Administration has so far identified two biomarkers, cfDNA and CTC, as the safest markers. The cfDNA marker is also widely used not only in the diagnosis of cancer, but also in the field of sex diagnosis and fetal Down syndrome in the first weeks of pregnancy.... 

    Design and Fabrication of Centrifugal Microfluidic Disc for Cell Lysis and DNA Extraction

    , M.Sc. Thesis Sharif University of Technology Jalalian, Pourya (Author) ; Saadatmand, Maryam (Supervisor) ; Garshasbi, Masoud (Co-Supervisor)
    Abstract
    Centrifugal microfluidic systems due to their unique properties, including the ease of sample transfer, high controllability, the need for samples and reagents in a small volume scale, the possibility of embedding a complete laboratory and modeling a variety of processes on a disk, they have great potential to be used in the field of point of care diagnosis. Such devices can perform several different processes simultaneously and continuously by using inertial and pneumatic forces as well as a complex network of microchannels. The purpose of this research is to design and build a centrifugal microfluidic disc for lysing amniotic stem cells, followed by DNA extraction, in order to detect fetal... 

    Production of drug Loaded Microgels Using Microfluidic

    , M.Sc. Thesis Sharif University of Technology Mehraji, Sima (Author) ; Saadatmand, Maryam (Supervisor) ; Eskandari, Mahnaz (Supervisor)
    Abstract
    Microfluidic systems have the ability to produce microgels with uniform size distribution and spherical shape due to the laminar flow and better control of the flow rates. Spherical microgels with same size can be used as high-potential carriers for drug release. An important challenge in the production of these drug-carrying microgels is the simultaneous process of drug loading into microgels and their production. The overall goal of this project was to produce drug-carrying microgels with uniform size distribution that show controlled drug release. To achieve this goal, various factors such as the type of polymer, the type of drug, the volume ratio of the polymer and the drug and the... 

    Fabrication of Scaffold with Microfluidic Channels for Heart Tissue Engineering

    , M.Sc. Thesis Sharif University of Technology Momeni, Ehsan (Author) ; Mashayekhan, Shohreh (Supervisor) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Myocardial infarction (MI) is one of the diseases caused by the temporary or permanent cramp of major coronary arteries. Due to this blockage, blood flow to the heart's myocardial tissue is greatly reduced and finally the person suffered from a Heart stroke (HS). Heart tissue engineering is a promising approach, based on the combination of cells and suitable biomaterials to develop and create heart-like biological substitutes. Since high cardiac cell density, providing metabolic needs like oxygen and nutrients was a challenge. So creation of blood vessel networks within this type of designed tissue has been considered very much.The purpose of this project is to construct scaffolds with... 

    Computer modeling of drug distribution after intravitreal administration

    , Article World Academy of Science, Engineering and Technology ; Volume 77 , 2011 , Pages 706-716 ; 2010376X (ISSN) Haghjou, N ; Abdekhodaie, M. J ; Cheng, Y. L ; Saadatmand, M ; Sharif University of Technology
    2011
    Abstract
    Intravitreal injection (IVI) is the most common treatment for eye posterior segment diseases such as endopthalmitis, retinitis, age-related macular degeneration, diabetic retinopathy, uveitis, and retinal detachment. Most of the drugs used to treat vitreoretinal diseases, have a narrow concentration range in which they are effective, and may be toxic at higher concentrations. Therefore, it is critical to know the drug distribution within the eye following intravitreal injection. Having knowledge of drug distribution, ophthalmologists can decide on drug injection frequency while minimizing damage to tissues. The goal of this study was to develop a computer model to predict intraocular...