Loading...
Search for:
sabbaghi--ahmad-reza
0.135 seconds
Total 2712 records
Hydrodynamic Analysis and Stability Investigation of A Floating Model of Waste Collection in Port Waters
, M.Sc. Thesis Sharif University of Technology ; Abbaspour, Majid (Supervisor)
Abstract
Given that achieving the form of hydrodynamic hulls has made it possible to reach higher speeds, much research has been conducted today to reduce the drag force exerted on vessels and to keep them stable in calm and rough water in deep and shallow areas.In this project, a catamaran garbage collector vessel has been designed and developed specifically for the cleaning and collection of surface waste in ports. The design of this vessel aims to reduce the environmental impact of floating waste and improve the efficiency of cleaning operations. The double-hull structure (catamaran) of this vessel allows for high stability and hydrodynamic efficiency.To evaluate the performance of this vessel,...
The kautz mesh: a new topology for SoCs
, Article 2008 International SoC Design Conference, ISOCC 2008, Busan, 24 November 2008 through 25 November 2008 ; Volume 1 , 2008 , Pages I300-I303 ; 9781424425990 (ISBN) ; Sarbazi Azad, H ; Sharif University of Technology
2008
Abstract
Nowadays networks-on-chip are emerging as a hot topic in IC designs with high integration. In addition to popular mesh topologies, other structures can also be considered especially in 3D VLSI design. The Kautz topology is one of the interconnection architectures for multiprocessors. In this paper we propose an efficient three dimensional layout for a novel 2D mesh structure based on the Kautz topology. Simulation results show that by using the third dimension, performance and latency can be improved compared to the 2D VLSI implementation. ©2008 IEEE
Seismic Retrofitting of Buried Pipelines in Soil Slopes using Physical Model Shaking Table Tests
, M.Sc. Thesis Sharif University of Technology ; Jafarzadeh, Fardin (Supervisor)
Abstract
The purpose of this research is to study methods of Seismic retrofitting of buried pipelines in soil slopes subjected to landslide due to earthquakes. For this purpose, two methods were considered. The first method is to increase the burial depth of pipes. To check the performance of this method, results of three physical model tests conducted by previous research groups in this project, were used. The second method is to construct flexible retaining walls adjacent to buried pipe in soil slope. Wall was selected of Expanded polystyrene (EPS) geofoam. For this purpose a physical model was built on and excited using shaking table facility of Sharif University of Technology. Simulation laws...
Analysis and Improvement of QoS in Optical CDMA Networks Using Cross Layer Design Concepts
, M.Sc. Thesis Sharif University of Technology ; Pakravan, Mohammad Reza (Supervisor)
Abstract
According to the rapid growing in communication devices, users need higher rates for their usages. Fiber optics is one the major choices to support such rates. One of the simplest and cheapest networks is Local Area Network (LAN) as a Passive Optical Network (PON). In these networks, some computers are locally connected to a passive optical device and communicate through it. Multiple access to a shared channel is an important task in such a network. In this thesis, Code Division Multiple Access (CDMA) is used and a new algorithm for Multiple Access Control Sublayer (MAC) based on scheduling will be developed to improve Quality of Service (QoS) and stabilize the network.
In the scheduling...
In the scheduling...
Scattering Theory on Locally symmetric Spaces
, M.Sc. Thesis Sharif University of Technology ; Razvan, Mohammad Reza (Supervisor)
Abstract
Scattering theory on locally symmetric space first was studied by Peter Lax and Ralph Phillips. They studied the and develop scattering theory on it. Without the Fourier analysis tools this theory was completed with a lot of computations. In this thesis first we try to construct Fourier analysis by definition Fourier transform then by means of new tools we prove very short version of scattering theory on locally symmetric space . In general case for studying scattering theory we need firs spectral decomposition of Hilbert space of square integrable functions locally symmetric spaces of rational rank one is achieved by quotient of symmetric space where G is Lie group and K is maximal...
Comparing the Performance of Centrifuge, Membrane Filter and Filter Press for Clarification of Lipase Enzyme
, M.Sc. Thesis Sharif University of Technology ; Rousta Azad, Reza (Supervisor)
Abstract
Lipases (Triacyl Glycerol Acyl Hydrolase, EC.3.1.1.3) are multidimensional biocatalysts which have many applications in food industrials, dairy, fats and oils processing, detergents, synthesis of pure chemical and pharmaceutical materials, paper industrial and cosmetics. Generally, industrial enzymes are produced extracellularly, so their separation from a low-cost complex medium (usually used for production) is one of the cost stages in their production process. Filtration is the most economical method of separation in the production of enzymes, but due to the small size of colloidal particles and cell masses present in the fermentation environment, its use is subject to limitations. In...
Developing an Applied Model for Energy Management in Dairy Production Industry
, M.Sc. Thesis Sharif University of Technology ; Mokhtar, Ali Reza (Supervisor) ; Miremadi, Ali Reza (Supervisor)
Abstract
Reviewing trends of energy consumption in the world reveals that sooner or later energy resources will be depleted. This concerning rate of consumption has brought about more greenhouse gases (GHG) emission influencing deleteriously on environment and climate. Human has continued energy consumption to maintain and improve the quality of his life through industrial production. Industry as a significant energy user owns considerable contribution to this consumption. Several attempts have been carried out to develop energy management systems in order to improve the energy efficiency of industrial sectors. Whilst they are comprehensive and could be applied to any sector, there is lack of...
Formability analysis of Tailor Welded Blank Pridaction with Friction Stret Weld
, M.Sc. Thesis Sharif University of Technology ; Asempour, Ahmad (Supervisor) ; Naghdabadi, Reza (Supervisor)
Abstract
The Tilor welded blank (TWB) two or more sheets with different thickness or strength which are welded together. The automobile designer are searching for new methods to reduce the cars’ weight and producing cost in order to diminish fuel consumption so they can survive in the competitive market. One way to achieve to this seemingly Contradictory demands, is using TWB in cars’ body. One of the most applicable methods to investigate the formability of metals sheets, is Forming Limit Diagrams (FLD). Three ways to determine the FLD are: Analytical Method, Experimental Methods, and Numerical Method. The experimental method to determine FLD, require metal sheets to undergo in different strain...
The 2D digraph-based NoCs: Attractive alternatives to the 2D mesh NoCs
, Article Journal of Supercomputing ; Vol. 59, issue. 1 , January , 2012 , pp. 1-21 ; ISSN: 9208542 ; Modarressi, M ; Sarbazi-Azad, H ; Sharif University of Technology
2012
Abstract
This paper proposes two-dimensional directed graphs (or digraphs for short) as a promising alternative to the popular 2D mesh topology for networks-onchip (NoCs). Mesh is the most popular topology for the NoCs, mainly due to its suitability for on-chip implementation and low cost. However, the fact that a digraph offers a lower diameter than its equivalent linear array of equal cost motivated us to evaluate digraphs as the underlying topology of NoCs. This paper introduces a family of NoC topologies based on three well-known digraphs, namely de Bruijn, shuffleexchange, and Kautz. We study topological properties of the proposed topologies. We show that the proposed digraph-based topologies...
The 2D SEM: A novel high-performance and low-power mesh-based topology for networks-on-chip
, Article International Journal of Parallel, Emergent and Distributed Systems ; Vol. 25, issue. 4 , 2010 , p. 331-344 ; ISSN: 17445760 ; Modarressi, M ; Sarbazi-Azad, H ; Sharif University of Technology
2010
Abstract
In this paper, a 2D shuffle-exchange based mesh topology, or 2D shuffle-exchange mesh (SEM) for short, is presented for network-on-chips. The proposed 2D topology applies the conventional well-known shuffle-exchange structure in each row and each column of the network. Compared to an equal sized mesh which is the most common topology in on-chip networks, the proposed shuffle-exchange based mesh network has smaller diameter but for an equal cost. Finally for better performance cross-shuffle is proposed. Simulation results show that the 2D SEM and 2D cross-shuffle effectively reduce the power consumption and improve performance metrics of the on-chip networks compared to the conventional mesh...
The 2D digraph-based NoCs: Attractive alternatives to the 2D mesh NoCs
, Article Journal of Supercomputing ; Volume 59, Issue 1 , January , 2012 , Pages 1-21 ; 09208542 (ISSN) ; Modarressi, M ; Sarbazi Azad, H ; Sharif University of Technology
Kluwer Academic Publishers
2012
Abstract
This paper proposes two-dimensional directed graphs (or digraphs for short) as a promising alternative to the popular 2D mesh topology for networks-onchip (NoCs). Mesh is the most popular topology for the NoCs, mainly due to its suitability for on-chip implementation and low cost. However, the fact that a digraph offers a lower diameter than its equivalent linear array of equal cost motivated us to evaluate digraphs as the underlying topology of NoCs. This paper introduces a family of NoC topologies based on three well-known digraphs, namely de Bruijn, shuffleexchange, and Kautz. We study topological properties of the proposed topologies. We show that the proposed digraph-based topologies...
A multi-objective analysis for import quota policy making in a perishable fruit and vegetable supply chain: A system dynamics approach
, Article Computers and Electronics in Agriculture ; Volume 93 , 2013 , Pages 37-45 ; 01681699 (ISSN) ; Nedaei, H ; Ansari, S ; Sabbaghi, M ; Sharif University of Technology
2013
Abstract
This study investigates a supply chain of perishable fruits and vegetables. A simulation model using system dynamics approach is proposed to study the behaviors and relationships within the supply chain and to determine the impact of the supply, demand and price interactions. The proposed model yields an insight into the overall agricultural system, taking into account the influence of import quota policies. The purpose of this study is to develop a multi-objective model identifying the best import quota policy for Tehran Municipality Organization of Fruits and Vegetables. The multiple objectives are considered to be price mean, price variation and markup. Key conclusions were reached on how...
The 2D SEM: A novel high-performance and low-power mesh-based topology for networks-on-chip
, Article International Journal of Parallel, Emergent and Distributed Systems ; Volume 25, Issue 4 , 2010 , Pages 331-344 ; 17445760 (ISSN) ; Modarressi, M ; Sarbazi Azad, H ; Sharif University of Technology
2010
Abstract
In this paper, a 2D shuffle-exchange based mesh topology, or 2D shuffle-exchange mesh (SEM) for short, is presented for network-on-chips. The proposed 2D topology applies the conventional well-known shuffle-exchange structure in each row and each column of the network. Compared to an equal sized mesh which is the most common topology in on-chip networks, the proposed shuffle-exchange based mesh network has smaller diameter but for an equal cost. Finally for better performance cross-shuffle is proposed. Simulation results show that the 2D SEM and 2D cross-shuffle effectively reduce the power consumption and improve performance metrics of the on-chip networks compared to the conventional mesh...
The 2D DBM: an attractive alternative to the simple 2D mesh topology for On-Chip networks
, Article 26th IEEE International Conference on Computer Design 2008, ICCD, Lake Tahoe, CA, 12 October 2008 through 15 October 2008 ; 2008 , Pages 486-490 ; 9781424426584 (ISBN) ; Modarressi, M ; Sarbazi Azad, H ; Sharif University of Technology
2008
Abstract
During the recent years, 2D mesh network-onchip has attracted much attention due to its suitability for VLSI implementation. The 2-dimensional de Bruijn topology for network-on-chip is introduced in this paper as an attractive alternative to the popular simple 2D mesh NoC. Its cost is equal to that of the simple 2D mesh but it has a logarithmic diameter. We compare the proposed network and the popular mesh network in terms of power consumption and network performance. Compared to the equal sized simple mesh NoC, the proposed de Bruijn-based network has better performance while consuming less energy. © 2008 IEEE
A novel high-performance and low-power mesh-based NoC
, Article IPDPS 2008 - 22nd IEEE International Parallel and Distributed Processing Symposium, Miami, FL, 14 April 2008 through 18 April 2008 ; 2008 ; 9781424416943 (ISBN) ; Modarressi, M ; Sarbazi Azad, H ; Sharif University of Technology
2008
Abstract
In this paper, a 2D shuffle-exchange based mesh topology, or 2D SEM (Shuffle-exchange Mesh) for short, is presented for network-on-chips. The proposed two-dimensional topology applies the conventional well-known shuffle-exchange structure in each row and each column of the network. Compared to an equal sized mesh which is the most common topology in on-chip networks, the proposed shuffle-exchange based mesh network has smaller diameter but for an equal cost. Simulation results show that the 2D SEM effectively reduces the power consumption and improves performance metrics of the on-chip networks with regard to the conventional mesh topology. ©2008 IEEE
Using Machine Learning Methods in Financial Market for Fundamental or Technical Analysis Based on Hybrid Models
, M.Sc. Thesis Sharif University of Technology ; Kianfar, Farhad (Supervisor)
Abstract
Forex prediction is one of the inresting topics for researchers and traders. They are always trying to improve their accuracy. Recently machine learning technichs especially deep neural networks has shown great success and high accuracy for market prediction.In this paper we propose several multi-input deep neural networks to predict the direction and amount of change for euro/usd rate. Our models are based on scalping strategy fitting high frequency trading. Our first model is based on deep Long Short Term Memory layers which is our best model. Our second model is based on deep 1D- Convolutional layers. The last model is our simplest model which is based on MultiLayer Perceptron. Also we...
Fluid Suspended Films in Present of Electric Field and Voltage
, Ph.D. Dissertation Sharif University of Technology ; Amjadi, Ahmad (Supervisor) ; Ejtehadi, Mohammad Reza ($item.subfieldsMap.e)
Abstract
Scientists want to know how they can control fluids motion. They use electric fields for controlling the fluids in different dimensions. In small size, application of electric fields is very important because of biological applications. We use electric current and field for rotating freely suspended films. Here, we study soap, polar and non-polar liquids, MBBA liquid crystal and ferrofluids films. We show that the surface charge plays the crucial role in rotating the films.We study the correlation between rotation of a film and different physical quantities.Our experiments confirm that dipole moments of fluid molecules do not show a clear effect on the rotation. Increasing the dipole moment...
Stabilization of the Finite element Analysis of the Fluid-Structure Interaction in Micro Systems in Small Time Steps
, Ph.D. Dissertation Sharif University of Technology ; Movahhedy, Mohammad Reza (Supervisor) ; Assempour, Ahmad (Supervisor)
Abstract
Fluid-structure interaction plays an important role in the performance of various Microsystems. In many micro-devices such as micropumps, microvalves and micromixers, the fluid flow is driven by a vibrating solid membrane. Since the fluid also plays a role in resistance to the solid vibration and deformation, the solid vibration and the fluid flow are always coupled and a full fluid-structure interaction (FSI) analysis is required in order to investigate the performance characteristics of these devices. Since the frequency of the solid vibration is normally high in micro-devices, the time step size required for the finite element analysis of the fluid-structure interaction in these devices...
A Fuzzy Multi-Criteria Approach to Sustainable Development Case Study of Hendurabi Island in Iran
,
Ph.D. Dissertation
Sharif University of Technology
;
Abrishamchi, Ahmad
(Supervisor)
;
Maknoon, Reza
(Co-Supervisor)
Abstract
The main objective of this research is to provide a framework by which decision-makers can evaluate and compare alternatives for sustainable development planning under uncertain dynamic future considering the risk and uncertainty associated with human judgment as well as the uncertain future. This approach combines the Delphi method, fuzzy set theory, and a discrete multi-criteria method based on prospect theory (TODIM). TODIM (an acronym in Portuguese for iterative MCDM) method is a particular multi-criteria approach based on the prospect theory. A qualitative Delphi technique is used to identify a set of qualitative sustainability criteria and to rate the alternatives accordingly. The...
Copper oxide nano-fluid stabilized by ionic liquid for enhancing thermal conductivity of reservoir formation: Applicable for thermal enhanced oil recovery processes
, Article Chemical Industry and Chemical Engineering Quarterly ; Volume 22, Issue 2 , 2016 , Pages 211-225 ; 14519372 (ISSN) ; Hezave, A. Z ; Sabbaghi, S ; Ayatollahi, S ; Sharif University of Technology
CI and CEQ
2016
Abstract
Since oil reservoirs are limited and energy demand is increasing, seeking for high efficient EOR processes or enhancing the efficiency of current proposed EOR methods for producing trapped oil from reservoirs are highly investigated. As a way out, it is possible to couple the EOR and nanotechnology to utilize the efficiency of both methods together. Regarding this possibility, in the present study, in the first stage of investigation stable and uniform water-based solution of nano-sized particles of copper oxide with different concentrations (0.01–0.05 M) were prepared and then injected into the core samples. In the first stage, the effects of different surfactants with respect to their...