Loading...
Search for:
sadeghi--mahdi
0.123 seconds
Total 751 records
Design and Implementation of a SQUID Based Magnetic Detection System Using Active and Passive Shielding
, M.Sc. Thesis Sharif University of Technology ; Fardmanesh, Mahdi (Supervisor)
Abstract
Superconducting SQUID sensors are one of the most sensitive magnetic sensors that have been ever produced. Due to their high sensitivity, these sensors have many applications in different fields. Magnetic Imaging and far away targets detections are of these applications. In this project, a magnetic imaging system based on Superconducting SQUID sensors have been designed and implemented. In SQUID applications one of the most important problems is the cancelation of the unwanted fields including background low frequency and high frequency fields. In residential and urban areas the interference of Electricity network is considered as one of the major noise sources. While the high frequency...
Hardware Implementation of Li-Fi System
, M.Sc. Thesis Sharif University of Technology ; Shabani, Mahdi (Supervisor) ; Kavehvash, Zahra (Co-Supervisor)
Abstract
Today, the “wireless” is used almost synonymously with radio-frequency (RF) technologies as a result of the wide-scale deployment and utilization of wireless RF devices and systems. The RF band ranges from 300 kHz to 300 GHz and its use is regulated by regional and international agencies. With the ever-growing popularity of data-heavy wireless communications, wireless products and services, the demand for RF spectrum is outstripping supply, which causes the spectrum congestion. Therefore, the time has come to seriously consider other viable options for wireless communication using the upper parts of the electromagnetic spectrum. In this way, the optical band which includes infrared, visible,...
Emergence of the Electroweak Vacuum via Quantum Corrections
, M.Sc. Thesis Sharif University of Technology ; Torabian, Mahdi (Supervisor) ; Arfaei, Hesamaddin (Co-Advisor)The Effect of Rudder Angle on Ship’s Fuel Consumption
, M.Sc. Thesis Sharif University of Technology ; Khorasanchi, Mahdi (Supervisor) ; Zare, Arman (Co-Supervisor)
Abstract
The aim of this research is to investigate the effect of speed and direction of current on ship fuel consumption. A KCS benchmark model has been numerically studied in calm water and fourteen current and wind conditions with the same speed and different directions to determine how the ship performance is dependent on flow conditions. The model has been simulated in an artificial basin propelled by a single right-handed propeller via a CFD commercial code. Numerical results revealed a linear relationship between the deviation of current and wind from head-sea or following-sea conditions and the rudder angle. The head-sea and following-sea currents and winds increased and decreased the lateral...
Simulation of wetting tendency of fluids with high density ratios using RK Lattice Boltzmann method
, Article 16th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, ARC 2019, 14 October 2019 through 18 October 2019 ; 2020 ; Pak, A ; Sadeghi, H ; Sharif University of Technology
Asian Regional Conference on Soil Mechanics and Geotechnical Engineering
2020
Abstract
Several lattice Boltzmann models for multi-phase flow have been developed, but few of them are capable of modeling fluid flows with high density ratio in the order of 1000. Therefore, an advanced chromodynamics, Rothmann-Keller (RK) type model is employed in current study, which can handle liquid-gas density ratio in the order of 1000 and viscosity ratio in the order of 100. Other distinctive characteristics of the proposed model are high stability, and capability of setting parameters such as surface tension independently. In spite of these benefits, the original RK model fails to model wetting tendency of the fluids. As a result, it is impossible to correctly simulate two-fluid phase flow...
Mechanical behavior during aging of plastically deformed AA6061-SiCp composite in different temperatures
, Article Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications ; Volume 226, Issue 4 , 2012 , Pages 322-329 ; 14644207 (ISSN) ; Serajzadeh, S
SAGE
2012
Abstract
In this study, the kinetics of aging in AA6061 and AA6061 with 5% volume fraction SiCp were studied and compared. The composite was first produced and homogenized using stir casting technique followed by hot extrusion with the ratio of 18:1. Then, both AA6061 and the composite were aged at three different temperatures including room temperature, 170 °C and 240 °C, while mechanical properties during aging were evaluated employing hardness measurements and tensile testing. Moreover, in order to assess the effect of plastic deformation on the kinetics of aging, a series of samples were first deformed by equal-channel angular pressing immediately after solution treatment and then aged in the...
Electroosmotic flow and ionic conductance in a pH-regulated rectangular nanochannel
, Article Physics of Fluids ; Volume 29, Issue 6 , 2017 ; 10706631 (ISSN) ; Saidi, M. H ; Sadeghi, A ; Sharif University of Technology
2017
Abstract
Infinite series solutions are obtained for electrical potential, electroosmotic velocity, ionic conductance, and surface physicochemical properties of long pH-regulated rectangular nanochannels of low surface potential utilizing the double finite Fourier transform method. Closed form expressions are also obtained for channels of large height to width ratio for which the depthwise variations vanish. Neglecting the Stern layer impact, the effects of EDL (Electric Double Layer) overlap, multiple ionic species, and association/dissociation reactions on the surface are all taken into account. Moreover, finite-element-based numerical simulations are conducted to account for the end effects as well...
Geotechnical characterization and collapsibility of a natural dispersive loess
, Article Engineering Geology ; Volume 250 , 2019 , Pages 89-100 ; 00137952 (ISSN) ; Kiani, M ; Sadeghi, M ; Jafarzadeh, F ; Sharif University of Technology
Elsevier B.V
2019
Abstract
During preliminary investigation phase of the national Chabahar-Zahedan railway line, serious geotechnical problems including non-uniform settlements, tensile cracks, and local collapse were reported in parts of the path near the coastline. A follow-up field investigation revealed that the in-situ soil at construction site has a metastable structure being sensitive to saturation and loading. Therefore, a comprehensive series of physical, chemical, electro-chemical, and geotechnical tests were conducted to classify and characterize the soil properties and behavior in its natural state. The natural soil was classified as a clayey loess with moderately dispersive to dispersive characteristics....
Geometry effect on electrokinetic flow and ionic conductance in pH-regulated nanochannels
, Article Physics of Fluids ; Volume 29, Issue 12 , 2017 ; 10706631 (ISSN) ; Saidi, M. H ; Moosavi, A ; Sadeghi, A ; Sharif University of Technology
2017
Abstract
Semi-analytical solutions are obtained for the electrical potential, electroosmotic velocity, ionic conductance, and surface physicochemical properties associated with long pH-regulated nanochannels of arbitrary but constant cross-sectional area. The effects of electric double layer overlap, multiple ionic species, and surface association/dissociation reactions are all taken into account, assuming low surface potentials. The method of analysis includes series solutions which the pertinent coefficients are obtained by applying the wall boundary conditions using either of the least-squares or point matching techniques. Although the procedure is general enough to be applied to almost any...
Unsteady solute dispersion by electrokinetic flow in a polyelectrolyte layer-grafted rectangular microchannel with wall absorption
, Article Journal of Fluid Mechanics ; Volume 887 , 2020 ; Saidi, M. H ; Moosavi, A ; Sadeghi, A ; Sharif University of Technology
Cambridge University Press
2020
Abstract
The dispersion of a neutral solute band by electrokinetic flow in polyelectrolyte layer (PEL)-grafted rectangular/slit microchannels is theoretically studied. The flow is assumed to be both steady and fully developed and a first-order irreversible reaction is considered at the wall to account for probable surface adsorption of solutes. Considering low electric potentials, analytical solutions are obtained for electric potential, fluid velocity and solute concentration. Special solutions are also obtained for the case without wall adsorption. To track the dispersion properties of the solute band, the generalized dispersion model is adopted by considering the exchange, the convection and the...
Dispersivity, collapsibility and microstructure of a natural dispersive loess from Iran
, Article 16th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, ARC 2019, 14 October 2019 through 18 October 2019 ; 2020 ; Nasiri, H ; Panahi, P. A ; Sadeghi, M ; Sharif University of Technology
Asian Regional Conference on Soil Mechanics and Geotechnical Engineering
2020
Abstract
A new type of collapsible soil was encountered in Southern Iran and caused some serious technical problems including subsidence, collapse and sinkholes during the construction of Zahedan-Chabahar railway. Field observations indicated that in-situ soil contains excessive amount of salts resulting in dispersive features in response to seepage forces in addition to its collapsibility. Therefore, a systematic research plan including field sampling and laboratory testing was carried out to investigate the observed geotechnical features. Results of physio-chemical tests revealed the dominance of Sodium in excess of 70% relative to total dissolved salts, which results in high dispersive potential....
Modified carrageenan. 5. Preparation, swelling behavior, salt- and pH-sensitivity of partially hydrolyzed crosslinked carrageenan-graft-polymethacrylamide superabsorbent hydrogel [electronic resource]
, Article Polymers for Advanced Technologies ; Volume 15, Issue 11, pages 645–653, November 2004 ; Sadeghi, M ; Hosseinzadeh, H
Abstract
The polysaccharide, kappa-carrageenan (κC) was chemically modified to achieve a novel superabsorbent hydrogel via graft copolymerization of methacrylamide (MAM) onto the substrate followed by alkaline hydrolysis. Ammonium persulfate (APS) and N,N′-methylene bisacrylamide (MBA) were used as a free-radical initiator and a crosslinker, respectively. The saponification reaction was carried out using sodium hydroxide aqueous solution. Either κC-g-PMAM or hydrolyzed κC-g-PMAM (PMAM: polymethacrylamide) was characterized by FT-IR spectroscopy. The effect of grafting variables (i.e. concentration of MBA, MAM, and APS) and alkaline hydrolysis conditions (i.e. NaOH concentration, hydrolysis time and...
MBBR and MBR Reactor Configuration for Better Performance
, M.Sc. Thesis Sharif University of Technology ; Borgheei, Mahdi (Supervisor)
Abstract
Membrane bioreactors (MBRs) which are commonly understood as the combination of membrane filtration and biological treatment using activated sludge have several advantages, but membrane fouling reduces the membrane efficiency, permeability and lifetime. An alternative is replacing a moving bed biofilm reactor (MBBR) with the activated sludge system which may reduce the effect of membrane fouling. The sludge produced in MBBRs has poor settling characteristics, therefore, their efficiency is limited by the sedimentation tank performance and they require a larger settling surface. The combination of moving bed biofilm reactors and membrane bioreactors can compensate for the drawbacks of both of...
Optimizing a bi-objective inventory model of a three-echelon supply chain using a tuned hybrid bat algorithm
, Article Transportation Research Part E: Logistics and Transportation Review ; Vol. 70, issue. 1 , October , 2014 , p. 274-292 ; Mousavi, S. M ; Niaki, S. T. A ; Sadeghi, S ; Sharif University of Technology
2014
Abstract
This paper presents a bi-objective VMI problem in a single manufacturer-single vendor multi-retailer (SM-SV-MR) supply chain, which a redundancy allocation problem is incorporated. In the hybridized problem, a manufacturer produces a single item using several machines that work in series, and stores it in a warehouse to replenish one vendor who delivers it to several retailers using the shortest possible route. A novel meta-heuristic, called hybrid bat algorithm (HBA), with calibrated parameters is utilized to find a near-optimum solution. To show the efficiency of HBA, the results are compared to the ones using the traditional BA and a genetic algorithm
Optimizing a multi-vendor multi-retailer vendor managed inventory problem: Two tuned meta-heuristic algorithms
, Article Knowledge Based Systems ; Volume 50 , September , 2013 , Pages 159-170 ; 09507051 (ISSN) ; Mousavi, S. M ; Niaki, S. T. A ; Sadeghi, S ; Sharif University of Technology
2013
Abstract
The vendor-managed inventory (VMI) is a common policy in supply chain management (SCM) to reduce bullwhip effects. Although different applications of VMI have been proposed in the literature, the multi-vendor multi-retailer single-warehouse (MV-MR-SW) case has not been investigated yet. This paper develops a constrained MV-MR-SW supply chain, in which both the space and the annual number of orders of the central warehouse are limited. The goal is to find the order quantities along with the number of shipments received by retailers and vendors such that the total inventory cost of the chain is minimized. Since the problem is formulated into an integer nonlinear programming model, the...
Optimising multi-item economic production quantity model with trapezoidal fuzzy demand and backordering: Two tuned meta-heuristics
, Article European Journal of Industrial Engineering ; Volume 10, Issue 2 , 2016 , Pages 170-195 ; 17515254 (ISSN) ; Niaki, S. T. A ; Malekian, M. R ; Sadeghi, S ; Sharif University of Technology
Inderscience Enterprises Ltd
2016
Abstract
In this paper, a multi-item economic production quantity model with fuzzy demand is developed in which shortages are backordered and the warehouse space is limited. While the demand is assumed to be a trapezoidal fuzzy number, the centroid defuzzification method is used to defuzzify fuzzy output functions. The Lagrangian relaxation procedure is first employed to solve the problem. Then, the model is extended to a constrained fuzzy integer nonlinear programming, in order to suit real-world situations. As the extended model cannot be solved in a reasonable time using exact methods, two meta-heuristic algorithms, named the genetic algorithm (GA) and the particle swarm optimisation (PSO) each...
Forecasting the effects of a Canada-US currency union on output and prices: A counterfactual analysis
, Article Journal of Forecasting ; Volume 32, Issue 7 , 2013 , Pages 639-653 ; 02776693 (ISSN) ; Sharif University of Technology
2013
Abstract
This paper is a counterfactual analysis investigating the consequences of the formation of a currency union for Canada and the USA: whether outputs increase and prices decrease if these countries form a currency union. We use a two-country cointegrated model to conduct the counterfactual analysis, where the conditional forecasts are generated based on the Gaussian assumption. To deal with structural breaks and model uncertainty, conditional forecasts are generated from different models/estimation windows and the model-averaging technique is used to combine the forecasts. We also examine the robustness of our results to parameter uncertainty using the wild bootstrap method. The results show...
Electrokinetic Flow in pH-Regulated Solid-State/Soft Micro-Nanochannels
,
Ph.D. Dissertation
Sharif University of Technology
;
Saeedi, Mohammad Hassan
(Supervisor)
;
Mousavi, Ali
(Co-Supervisor)
;
Sadeghi, Arman
(Co-Supervisor)
Abstract
In recent years, advances have been made in the field of miniaturization of the devices (in order to increase their efficiency, lessen the materials needed for the constructions and experiments, reduce costs and energy usage) resulting in the dramatic increase of surface to volume ratio in these devices. This progress has led to the dominance of surface forces which can be used to control very important interface phenomena having a special application such as electrokinetic. Using today’s manufacturing technology; it is possible to construct micro-nanochannels made from different materials such as silicon, glass, quartz, polydimethylsiloxane (PDMS), polymethyl methacrylate (PMMA) whose...
What is it to be Physical?
, M.Sc. Thesis Sharif University of Technology ; Golshani, Mahdi (Supervisor)
Abstract
In this text to find the answer of the question “ what is it to be physical” in a definition form or a scheme of the term physical, firstly we sought for a possible consensus among recent physicists and philosophers. But from their answers not only we did not find any clear consensus but also most of them confess that the term is ambiguous and unclear. In a general aspect, we can categorize the answers to two theoretical and realistic perspective. The theoretical perspective, beside circularity and Hempel’s triviality, seems not to present any criteria for being physical. In realistic perspective, it seems that there is no ontologic constraint for being physical, that is from “being...
Biomass Separation in Moving Bed Biofilm Reactors (MBBR) by Natural And Innovative Filters
, M.Sc. Thesis Sharif University of Technology ; Borgheei, Mahdi (Supervisor)
Abstract
The application of membranes for separate of particles in mainly microbial flacs , are fast growing in biological treatment systems. Membrane bioreactors are now considered as one of the major new processes in wastewater treatment. However , membranes are expensive and costly. This study is carried out to test an innovative , locally made filters for separation of flocs in an MBBR reactor. This innovative filter is replacing a traditional settling tank. This type of filters is made very cheaply and has important advantages in installing and operation. Experiments were carried out in a laboratory scale MBBR unit. A filter unit consisting of 3 innovative filter tubes were placed and the...