Loading...
Search for: sadeghi--mostafa
0.134 seconds

    (MCNP Simulation of Online Elemental Analyzer in the Cement Manufacturing Poroces by Prompt Gamma Neutron Activation Analysis (PGNAA

    , M.Sc. Thesis Sharif University of Technology Sadeghi, Mohammad (Author) ; Sohrabpour, Mostafa (Supervisor)
    Abstract
    Method of Prompt Gamma Neutron Activation Analysis (PGNAA) is useful for controlling some massive production processes such as cement industry and mineral materials. Difficulty of other methods of analysis such as XRF comparing with PGNAA is that mass of sample is small and it doesn’t determine heterogeneity of mixture. On the other hand, need to sampling is also another problem of these analysis methods because sampling is terminated and it doesn’t supervise on production continuously, in fact its quality can’t be revealed simultaneously and there is a long time between sampling and control of process. Usually, analysis methods such as XRF are useful for processes that are controlled... 

    Development and Evaluation of Improved Structures for EVs Integrated Battery Chargers Based on Various Types of Propulsion Motors in V2G and G2V Applications

    , M.Sc. Thesis Sharif University of Technology Sadeghi Nejad, Emad (Author) ; Parniani, Mostafa (Supervisor) ; Askarian Abyaneh, Iman (Co-Supervisor)
    Abstract
    The integrated battery charger (IBC), made from the combination of a battery charger and the traction propulsion system of EVs is an emerging concept that can save the volume and final cost of battery chargers. As a type of on-board EV battery charger, IBC topology must work with expected performance in two modes of operation separately, charging mode and propulsion mode. In this thesis, to propose new topologies of IBCs, firstly the previous studies relevant to EV battery chargers and their different types have been reviewed. By analysis and investigation of IBC topologies, the principles of integrating battery chargers have been inferred and presented. These principles help us to evaluate... 

    Simulation of wetting tendency of fluids with high density ratios using RK Lattice Boltzmann method

    , Article 16th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, ARC 2019, 14 October 2019 through 18 October 2019 ; 2020 Sadeghi, M ; Pak, A ; Sadeghi, H ; Sharif University of Technology
    Asian Regional Conference on Soil Mechanics and Geotechnical Engineering  2020
    Abstract
    Several lattice Boltzmann models for multi-phase flow have been developed, but few of them are capable of modeling fluid flows with high density ratio in the order of 1000. Therefore, an advanced chromodynamics, Rothmann-Keller (RK) type model is employed in current study, which can handle liquid-gas density ratio in the order of 1000 and viscosity ratio in the order of 100. Other distinctive characteristics of the proposed model are high stability, and capability of setting parameters such as surface tension independently. In spite of these benefits, the original RK model fails to model wetting tendency of the fluids. As a result, it is impossible to correctly simulate two-fluid phase flow... 

    Mechanical behavior during aging of plastically deformed AA6061-SiCp composite in different temperatures

    , Article Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications ; Volume 226, Issue 4 , 2012 , Pages 322-329 ; 14644207 (ISSN) Sadeghi, I ; Serajzadeh, S
    SAGE  2012
    Abstract
    In this study, the kinetics of aging in AA6061 and AA6061 with 5% volume fraction SiCp were studied and compared. The composite was first produced and homogenized using stir casting technique followed by hot extrusion with the ratio of 18:1. Then, both AA6061 and the composite were aged at three different temperatures including room temperature, 170 °C and 240 °C, while mechanical properties during aging were evaluated employing hardness measurements and tensile testing. Moreover, in order to assess the effect of plastic deformation on the kinetics of aging, a series of samples were first deformed by equal-channel angular pressing immediately after solution treatment and then aged in the... 

    Electroosmotic flow and ionic conductance in a pH-regulated rectangular nanochannel

    , Article Physics of Fluids ; Volume 29, Issue 6 , 2017 ; 10706631 (ISSN) Sadeghi, M ; Saidi, M. H ; Sadeghi, A ; Sharif University of Technology
    2017
    Abstract
    Infinite series solutions are obtained for electrical potential, electroosmotic velocity, ionic conductance, and surface physicochemical properties of long pH-regulated rectangular nanochannels of low surface potential utilizing the double finite Fourier transform method. Closed form expressions are also obtained for channels of large height to width ratio for which the depthwise variations vanish. Neglecting the Stern layer impact, the effects of EDL (Electric Double Layer) overlap, multiple ionic species, and association/dissociation reactions on the surface are all taken into account. Moreover, finite-element-based numerical simulations are conducted to account for the end effects as well... 

    Geotechnical characterization and collapsibility of a natural dispersive loess

    , Article Engineering Geology ; Volume 250 , 2019 , Pages 89-100 ; 00137952 (ISSN) Sadeghi, H ; Kiani, M ; Sadeghi, M ; Jafarzadeh, F ; Sharif University of Technology
    Elsevier B.V  2019
    Abstract
    During preliminary investigation phase of the national Chabahar-Zahedan railway line, serious geotechnical problems including non-uniform settlements, tensile cracks, and local collapse were reported in parts of the path near the coastline. A follow-up field investigation revealed that the in-situ soil at construction site has a metastable structure being sensitive to saturation and loading. Therefore, a comprehensive series of physical, chemical, electro-chemical, and geotechnical tests were conducted to classify and characterize the soil properties and behavior in its natural state. The natural soil was classified as a clayey loess with moderately dispersive to dispersive characteristics.... 

    Geometry effect on electrokinetic flow and ionic conductance in pH-regulated nanochannels

    , Article Physics of Fluids ; Volume 29, Issue 12 , 2017 ; 10706631 (ISSN) Sadeghi, M ; Saidi, M. H ; Moosavi, A ; Sadeghi, A ; Sharif University of Technology
    2017
    Abstract
    Semi-analytical solutions are obtained for the electrical potential, electroosmotic velocity, ionic conductance, and surface physicochemical properties associated with long pH-regulated nanochannels of arbitrary but constant cross-sectional area. The effects of electric double layer overlap, multiple ionic species, and surface association/dissociation reactions are all taken into account, assuming low surface potentials. The method of analysis includes series solutions which the pertinent coefficients are obtained by applying the wall boundary conditions using either of the least-squares or point matching techniques. Although the procedure is general enough to be applied to almost any... 

    Unsteady solute dispersion by electrokinetic flow in a polyelectrolyte layer-grafted rectangular microchannel with wall absorption

    , Article Journal of Fluid Mechanics ; Volume 887 , 2020 Sadeghi, M ; Saidi, M. H ; Moosavi, A ; Sadeghi, A ; Sharif University of Technology
    Cambridge University Press  2020
    Abstract
    The dispersion of a neutral solute band by electrokinetic flow in polyelectrolyte layer (PEL)-grafted rectangular/slit microchannels is theoretically studied. The flow is assumed to be both steady and fully developed and a first-order irreversible reaction is considered at the wall to account for probable surface adsorption of solutes. Considering low electric potentials, analytical solutions are obtained for electric potential, fluid velocity and solute concentration. Special solutions are also obtained for the case without wall adsorption. To track the dispersion properties of the solute band, the generalized dispersion model is adopted by considering the exchange, the convection and the... 

    Dispersivity, collapsibility and microstructure of a natural dispersive loess from Iran

    , Article 16th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, ARC 2019, 14 October 2019 through 18 October 2019 ; 2020 Sadeghi, H ; Nasiri, H ; Panahi, P. A ; Sadeghi, M ; Sharif University of Technology
    Asian Regional Conference on Soil Mechanics and Geotechnical Engineering  2020
    Abstract
    A new type of collapsible soil was encountered in Southern Iran and caused some serious technical problems including subsidence, collapse and sinkholes during the construction of Zahedan-Chabahar railway. Field observations indicated that in-situ soil contains excessive amount of salts resulting in dispersive features in response to seepage forces in addition to its collapsibility. Therefore, a systematic research plan including field sampling and laboratory testing was carried out to investigate the observed geotechnical features. Results of physio-chemical tests revealed the dominance of Sodium in excess of 70% relative to total dissolved salts, which results in high dispersive potential.... 

    Study, Analysis & Optimizing The Process Of Approval, Design & Implementation Of Projects In The Iranian Oil Terminal Company(IOTC)

    , M.Sc. Thesis Sharif University of Technology Moosavi, Saeed (Author) ; Mostafavi, Mostafa (Supervisor)
    Abstract
    Since the Iranian oil terminals company(I.O.T.C.) has been the main and strategic gateway of exporting petroleum in the country and plays an important role in the optimum continuity of national, regional and international energy supply chain and also conducting the needed projects whit a desirable quality and minimum time and cost has a prominent influence on steady continuity of manufacturing, importing and exporting of petroleum and gas production. The main purpose of doing this thesis is diagnosing the process of approval, design and implementation of projects in the I.O.T.C., Thus, whit regarding to the modern needs of implementing projects and the necessity of reviewing the structure... 

    Study & Analysis of Delays Causes of Gas Projects in Tehran Gas Company & presenting Optimized Solutions by Applying Project Management Principles

    , M.Sc. Thesis Sharif University of Technology Ghiasi, Elahe (Author) ; Mostafavi, Mostafa (Supervisor)
    Abstract
    To deliver gas in time to different consumers like as industrial, commercial and domestic users is one of the most important parts in gas industry. So it is very important to utilize these projects in the specified time. There are huge harms for client, contractors and consumers when there is a delay in project utilization. To identify effective parameters on delays to remove them in future is an essential factor. In this research, all delay causes for TPGC (Tehran Province Gas Company) projects are analyzed and some solutions to remove these delays are presented. 10 hypotheses in relation of gas delivery have been assumed as delay causes. Then some questions have been discussed in relation... 

    Service Level Agreement Templates and Guides for Implementing, using eTOM

    , M.Sc. Thesis Sharif University of Technology Mahdioun, Saeid (Author) ; Mostafavi, Mostafa (Supervisor)
    Abstract
    Nowadays, in communication industry, specially data network, in which service quality is a serious parameter, request for making connection with appropriate quality (Proportionate to demands) and necessity of clarification of obligations of service providers and customers, as well as customer awareness of submitted materials and offering various services with different qualities & costs, led service providers, specially IP based networks, to make agreements with their customers, entitled service Level Agreement (SLA). The SLA specifies the service type, mutual obligations, related parameters, measuring methods, violation threshold, penalties and loss compensation. Whereas, applying... 

    Condition Monitoring of Water Pipelines by Using Acoustic Method a Study of Leak Detection in ABFA

    , M.Sc. Thesis Sharif University of Technology Alimoradi, Farid (Author) ; Mostafavi, Mostafa (Supervisor)
    Abstract
    Water is crucial to human being. We use water for a wide variety of uses daily. However, leakage has caused substantial water loss to our precious processed water. The major contributor to non-revenue water in Iran is pipeline leakages. The water industry in the nation has invested in equipment to detect and localize leaks in water distribution systems. One of the equipment mentioned is acoustic-based. The principle of acoustic is that whenever a leak is present in a pipeline, noise is generated and will travel along the pipeline. The acoustic leak detection method is then derived by calculating the distance traveled by this noise generated by the leak. Different equipment based on acoustic... 

    Assessment and Performance Improvement of Hierarchical Voltage Control System

    , M.Sc. Thesis Sharif University of Technology Davoodi, Ehsan (Author) ; Parniani, Mostafa (Supervisor)
    Abstract
    Hierarchical voltage control is one of the conventional kinds of coordinated voltage control schemes which has been studied in some countries in the last decades. In this method network is divided into several voltage control regions and in each region voltage profile is controlled near optimal level, satisfying the economic and secure goals of the network performance. In this thesis, after the explanation of the main concepts of this scheme, its effects on the network voltage control is assessed and its performance is improved. First the primary concepts of hierarchical voltage control are explained. Then, the methods of the control regions determination and pilot nodes selection are... 

    Analyzing the Healthcare Wastes and Feasibility Study of Related Items (Plastics)

    , M.Sc. Thesis Sharif University of Technology Mesbah, Niousha (Author) ; Mostafavi, Mostafa (Supervisor)
    Abstract
    Increasing population and competition for producing various productions and also more consumption in recent decades, result in producing more wastes. Therefore effective and continuous waste management is essential for monitoring the process (from the wastes generation source to the waste disposal) and establishing the efficient strategies to reduce wastes. One of the major sources of waste generation is hospitals that cause lots of environmental problem unless they are managed properly.Recycling is an important element of waste management that can reduce costs by innovative and proper management. The purpose of this research is identification of recyclable plastic items and estimates the... 

    The Analysis of Total Productive Maintenance Based on Computerized Maintenance Management System

    , M.Sc. Thesis Sharif University of Technology Behshad, Amir (Author) ; mostafavi, mostafa (Supervisor)
    Abstract
    The main purpose of this thesis is to analyze the total productive maintenance based on computerized maintenance management system. At first, a detailed study on total productive maintenance is performed and then the requirements of this maintenance strategy are specified. Also, a computerized maintenance management system is defined which can help total productive maintenance to reach to its requirements. Finally, a conceptual model and entity-relationship model for computerized maintenance management system data base has been created  

    Study of HVDC Transmission for Offshore Wind Farms Based on Voltage Source Converters

    , M.Sc. Thesis Sharif University of Technology Safaeian, Reza (Author) ; Parniani, Mostafa (Supervisor)
    Abstract
    In this thesis, DC transmission of offshore wind farms is studied thoroughly. Various system configurations that are introduced in the literatures are discussed and their control scheme for normal conditions and grid faults are studied. Then, the HVDC transmission based on voltage source converter, located between a local offshore ac grid and the onshore ac system is investigated as the most practical choice. The HVDC linke circuit elements are calculated and the control strategies of the offshore and onshore converters are introduced. DFIGs are considered to be the best choice for the offshore wind turbine generators. Then, the system is simulated and the frequency of the offshore grid is... 

    Feasibility Study of Manufacturing of Disposable Plant Containers

    , M.Sc. Thesis Sharif University of Technology Ansari, Mahmood (Author) ; Mostafavi, Mostafa (Supervisor)
    Abstract
    Although laws vary in the competitive business world of today and the changing supply and demand parameters show that the process of delivering new products to market is very important.Most organizations today have found that spending more than ever on trusting in traditional competitive levers such as quality, cost reduction and differentiation in selling more products and services are not enough to be successful in market, instead notions such as speed, flexibility andagility can have a significant trend toward offering new products and services. There aresome good reasons for knew that organizations need new ways to develop their new products to survival, compete with its competitors and... 

    Modified Load Scheduling Using Smart Meters

    , M.Sc. Thesis Sharif University of Technology Bahrami, Shahab (Author) ; Parniani, Mostafa (Supervisor)
    Abstract
    Implementation of various incentive-based demand response strategies has great potential to decrease peak load growth and customer electricity bill cost. Using advanced metering and automatic demand management makes it possible to optimize energy consumption, to reduce grid loss, and to release generation capacities for the sake of providing sustainable electricity supply, and reducing electricity bills for the customers. With these objectives, this thesis examines the previously suggested load scheduling programs in both residential and industrial sectors, and proposes new practical strategies for load management. This thesis has mainly focuses on three subdivisions of load management... 

    Coordinated Voltage Control of Power Systems in Normal and Emergency Operation States

    , Ph.D. Dissertation Sharif University of Technology Rabiee, Abbas (Author) ; Parniani, Mostafa (Supervisor)
    Abstract
    One of the main objectives in operating a power system is to maintain the system voltage properly to avoid equipment damage and transfer power efficiently. Automatic control of transmission network voltage provides significant improvements in security, quality and efficiency of power system operation. This thesis investigates coordinated voltage control of power systems in normal, alert and emergency states. The aim is to propose a comprehensive framework for real-time operation of practical power systems, ensuring secure operation of the system in the normal state and after occurrence of sever contingencies.
    At the first, a new coordinated voltage control scheme is proposed to ensure...