Sharif Digital Repository

The pressurized structure such as aircraft fuselage and pipeline (in the oil and water transportation) have a great importance in today’s world. There is a growing tendency in improving design factors, safety and maintenance of such valuable structures. Change of design’s philosophy during the time from infinite life to safe damage and safe life and after that damage tolerance, are a process leading to many changes in design and consequently the methods of inspection, evaluation and maintenance. In this way, using old methods like non-destructive test and evaluation (NDT/E) is encountered with different problems when damage is tiny and there is no coincidence in examination (inspection)... 

Nowadays, despite the development of technology and the spread of new energy consumption, resources such as oil, coal and natural gas still have the largest share of global consumption, and this means that the combustion of fossil fuels, despite of many environmental challenges, is still the most common source of energy in the world. Issues related to environmental pollution are the main challenges in using this type of energy. The emission of gaseous pollutants such as nitrogen oxides and carbon monoxide, as well as the emission of greenhouse gases resulting from the combustion of fossil fuels, have caused many negative environmental effects and global warming. Flameless combustion is one... 

In the complex and dynamic world of today's communication networks, Software-Defined Networking (SDN) with its flexibility and programmability has opened new horizons in network management. These networks, by decoupling the control plane from the data plane, enable centralized and efficient management. Despite these advantages, optimizing routing in these networks remains a significant challenge, and increased latency in SDNs due to centralized processing in the controller and communications between switches and controllers is a critical issue that can severely impact the quality of service. Traditional routing methods face numerous challenges due to their static nature and lack of... 

Fog computing is essentially the expansion of cloud computing towards the network edge, reducing user access time to computing resources and services. Various advantages of fog computing, including reduced latency, improve user experience; however, user mobility may limit the benefits of fog computing. By moving users from one location to another, their distance from a fog service and consequently the latency may increase. One solution to maintain latency within an acceptable range is the migration of fog tasks and preserving the distance between the user and available resources. Although some research has been conducted on fog task migration, none of them have considered load balancing in... 

The low female labor force participation rate in the Iranian labor market relative to the global average and even to countries that do not differ significantly from the socio-economic characteristics of our country is one of the important questions of the Iranian labor market. In this study, we seek to answer the question of whether the economic participation rate of married women will increase if the gender gaps in wages, job findings and job losses among women and men are eliminated in the Iranian labor market. To answer this question using household expenditure and income data and labor force data, we show that between the two categories of occupations, in terms of the share of women's... 

Entanglement spectrum is the set of eigenvalues of reduced density matrix for a definite state. It contains more information than the entanglement entropy. This spectrum can show entanglement measure, quantum phase transition and topological order in a system. In recent years, the entanglement spectrum for several models has been studied. The entanglement spectrum shows a correspondence to the energy spectrum within some specific regions, which are related to the edge state of the system; It has been verified for the Heisenberg ladder [1] and fractional quantum Hall effect [3]. Moreover, the topological order can be seen in the entanglement spectrum. There exists an acceptable adaption... 

Gesture and motion evaluation are needed for a variety of applications. The use of human hand motions as a natural interface tool has motivated researchers to conduct research in the modeling, analysis and evaluation of various hand movements. In particular, human-computer intelligent interaction has been a focus of research in vision-based gesture recognition. In this work, we introduce a 3-D hand model evaluation method that offers flexible and elaborate representation of hand motion. We used landmarked points on tips and joints of the fingers and calculated the 3-D coordinates of these points through a stereo vision system followed by an HMM (Hidden Markov Model) to recognize hand... 

International Data Company (IDC) has reported, at the end of 2020, the total amount of digital data stored in the entire world will reach 40 thousand Exabytes. The idea of accessing this volume of data, anywhere at any time by exploiting commodity hardware, led into the introduction of cloud storage. The abounded rate and variety of failures in the equipment used in cloud storage systems, placed fault tolerance, at top of the challenges in these systems. HDFS layer in Hadoop has provided cloud with reliable storage. Replication is the conventional method to protect data against failures in HDFS. But the storage overhead is a big deal and therefore designers are tending towards erasure codes.... 

Internet of Things (IoT) is a communicative infrastructure, which establishes IP-based connections between many smart devices with limited energy supplies. The gathering of such an enormous number of connected devices would impose many challenges, with routing the most important issue. Standardization of the IPv6 Routing Protocol for Low-power and Lossy Networks (RPL) was a major step towards fulfilling the IoT routing requirements. The key element in determining the routing policies and creation of the topology in RPL is the objective function. According to our studies, more than 97% of the consumed energy of a node in wireless networks is due to transceiver activities. On the other hand,... 

Nowadays, adaptable, versatile and flexible nature of Flying ad-hoc Networks (FANETs) make them popular in many academic and practical fields such as real-time applications, civil applications, search and rescue operations, identification and logistics. FANETs are organized multi-UAV systems that can accomplish complex missions through cooperation and collaboration. The unique features of these networks, such as high mobility, low node density, high frequency of topology changes, and three-dimensional flight environment, create various challenges in communication, especially in packet routing. In this type of network, a subset of UAVs connects to the infrastructure, while the remaining UAVs... 

Fatigue crack growth can have harmful effects on the reliability rotary machine. While an early warning to crack, can be used to extend the life of these expensive machines and increase reliability.Structural Vibration Condition Monitoring as a primary fault detection method, achieved to a lot amazing result and for this reason studies vibration behavior of cracked rotational shaft is a big issue for engineers of dynamic machine.In this research, first check the fault detection methods based on structural vibration condition monitoring, mode shape methods were extracted. Then by modeling rotational shaft in computer and creation of crack on it, fault detection quality of these methods have... 

It is important to provide an appropriate and economically method with technical and engineering considerations to stabilize excavated underground spaces. The necessity of this, especially for the construction of underground metro stations located in the cities which faces many problems, is more evident. In this research, it has been tried to introduce an optimal method according to the type of area for the construction of the underground station. In order to obtain stress and strain condition in structural elements and surface deformations due to different stages of excavating, numerical modeling in FLAC3D has been used. By examining the parameters that affect the sustainability of this... 

In the present study, the effects of increasing the value of shale gas production, either due to increased production or price increases, have been studied on economic variables such as employment, wage, property value and the number of births. In this regard, the data for each of these variables was used at the county level in the United States of America between 2000 and 2011. In order to estimate the desired effects, counties are divided into two types of boom and non-boom counties. The findings indicate that increasing natural gas production will lead to more employment and wage growth in boom counties than non-boom counties. Also, during the period of increasing production, the value of...