Sharif Digital Repository

In this thesis, DC transmission of offshore wind farms is studied thoroughly. Various system configurations that are introduced in the literatures are discussed and their control scheme for normal conditions and grid faults are studied. Then, the HVDC transmission based on voltage source converter, located between a local offshore ac grid and the onshore ac system is investigated as the most practical choice. The HVDC linke circuit elements are calculated and the control strategies of the offshore and onshore converters are introduced. DFIGs are considered to be the best choice for the offshore wind turbine generators. Then, the system is simulated and the frequency of the offshore grid is... 

Nowdays, many of communication systems working together. The fist part of each communication system is related to separating a desired part of system input signal. This is called channelisation. Channelization is a process where single, few, or all channels from a certain frequency band are separated for further processing. The separation of single channel is usually done by down-conversion followed by filtering and optional sample-rate conversion. A straightforward implementation for multi channel sepration, which is also the traditional implementation of wideband channelizer, is to simply use a single-channel channelizer for each channel. A few applications require that an input signal be... 

In numerous scientific disciplines, analyzing a system often fails to reveal significant relationships between its various variables. However, in certain instances, changes in one variable can influence the behavior of one or more other variables. Systems where such underlying causal relationships exist are referred to as causal systems. The process of inferring the structure of these systems is known as causal learning. In causal learning, given observed samples from a system and under certain assumptions, the joint distribution of the variables can determine the equivalence class of their corresponding graphical model. Once the equivalence class is identified, interventions are employed to... 

Focusing on fossil fuel to secure energy demand lead to big challenges. Hydrogen as alternative for fossil fuel has attracted a lot of attentions. Fuel cell with an electrochemical reaction which it’s byproducts are water and heat convert Hydrogen into electricity. High efficiency and low environmental pollution, persuade many researchers toward fuel cell commercialization. But problems such as high cost, high power oscillation and inertia, avoid fuel cell from significant development. One way to deal with these problems is using the fuel cell and battery hybrid system. In recent decade too many research has been made in utilizing this hybrid system in transportation. This project... 

The short life of Polymer Electrolyte Membrane (PEM) fuel cells is one of the critical criteria to their commercialization. A longer operation life time should be achieved to reach high reliability, low $/kWh cost and to use fuel cells as economical alternative energy systems.Therefore,diagnosing degradation mechanisms and the causes of power loss in fuel cell life time is of great importance. Operating conditions affect output power density and performance degradation. To achieve maximum power generation through fuel cell life time, a model is needed which is able to estimate power density and performance degradation simultaneously regarding to operating conditions. In present work, a... 

In this project a framework for Model Based Fault Diagnosis (MBFD) in a Gas Transmission Network (GTN) was developed. A black-box linear state-space model was used to capture dynamic behavior of an industrial benchmark for GTN. A full fledge commercial network simulator were used to obtain the required data for process identification. In order to check the robustness of the model zero mean white noise was imposed on various output obtained by the commercial simulator. Kalman filter was used to estimate the states of the GTN. These estimated states along with the measured output (all obtained from the commercial simulator) are almost similar to their corresponding estimated signal. This shows... 

Inappropriate effects of fossil fuels and conventional power generation systems on the environment have necessitated a sustainable energy system for the next decade by growing interests in renewable energy systems. The world’s most fast-growing renewable energy resource is the wind energy. The main problem of wind power is the power fluctuations at the load side caused by the variable nature of wind speed, and the main issue in case of remote locations is the long-term storage of power generated by wind turbines. Batteries can be used to store a limited amount of energy for a short time. Although new advances in this field have been achieved, most common type of batteries is hardly able to... 

The gradual exhaustion of oil and gas resources and the various problems involved in their pollution makes it necessary to promote a renewable energy system. One of the most interesting developments of standalone systems based on the utilization of hydrogen is solar hydrogen system. Central and southern Iran exhibit an excellent solar climate which makes them ideal places for solar hydrogen systems. The economy of Iran is based on oil and it has one of the largest reserves of oil and gas in the world but the reserves would not be enough to meet the domestic and export markets starting in three to four decades. Moreover, elimination of energy subsidies in Iran, will led to more tendencies to... 

In this thesis a general model for simulation of solar cooler for domestic usage is developed. The model consists of 2 main parts: thermo-dynamical and economical calculations. The thermodynamic part consists of 4 sub models: a model for calculation of incoming solar radiation, cooling load demand calculation, the refrigeration cycle and the solar cycle with heat storage.As for hourly calculation of system performance part of the model produces the hourly received radiation data based on geographical position and orientation of the receiving surface. Base on results of the cooling load calculation for a 9 m2 studying room located in western part of Tehran, 1 TBR (3.516 kW) is chosen as... 

increasing energy demand and emission of environmental pollutant as a result of using fossil fuels and increase in waste generated due to human activities resulted in considering this source as a partial substitute for fossil resources in power application . Hence in this project biomass is considered as source of energy for heat and power application. Having low quality energy is the most important difficulty for application this resource as an energy carrier, so, gasification is applied to convert this source to gas with higher quality one. Produced gas in gasification enters to a micro turbine to meet thermal and electrical demand of the Sharif energy research institute. To investigate... 

All living entities requires energy to continue their lives. In human beings this energy is provide through consumption of food, at first the consumed food gets converted to glucose and the produced glucose enters the blood and then goes to the body cells in which it is used to produce the required energy. The essential hormone which makes it possible to use Glucose for energy production is INSULIN. In the patients suffering from Type 1 Diabetes, lack of Insulin production makes it impossible for the cells to use Glucose for the production of their required energy. In these patients due to the fact that the blood Glucose is not used by the cells, the Blood Glucose Level (BGL) increases,... 

Application of the advanced control techniques and information technology in the biomedical engineering have been the focal point of the research communities in biomedical engineering due to the rapid growth of the nonlinear control theories along with the computer hardware. In this work the application of differential geometry and globally linearizing control has been applied to efficiently control the first phase of HIV disease based on the HIV infection model proposed in the literature. All the efforts have been in the way to obtain a suitable scenario of drug administration to suppress and control the infection. In the proposed scenario, drug administration is time dependant and... 

Traditionally, chemical Process design is focused on the selection of technologies and optimization based on economic consideration .In the 1970’s because of the global energy crisis, other consideration consider with economic goals .in this study we are eager to provide design procedures and guidance for optimizing chemical processes simultaneously based on economic and environmental aspects .this optimization is applied to production maleic anhydride(MA) from n-butane feedstock .an optimization algorithm based on the genetic algorithm with four decision variables(recycle flow ratio ,air to feed ratio ,solvent flow and reactor temperature ).for including dynamic objective in optimization...