Sharif Digital Repository

In this thesis, DC transmission of offshore wind farms is studied thoroughly. Various system configurations that are introduced in the literatures are discussed and their control scheme for normal conditions and grid faults are studied. Then, the HVDC transmission based on voltage source converter, located between a local offshore ac grid and the onshore ac system is investigated as the most practical choice. The HVDC linke circuit elements are calculated and the control strategies of the offshore and onshore converters are introduced. DFIGs are considered to be the best choice for the offshore wind turbine generators. Then, the system is simulated and the frequency of the offshore grid is... 

Nowdays, many of communication systems working together. The fist part of each communication system is related to separating a desired part of system input signal. This is called channelisation. Channelization is a process where single, few, or all channels from a certain frequency band are separated for further processing. The separation of single channel is usually done by down-conversion followed by filtering and optional sample-rate conversion. A straightforward implementation for multi channel sepration, which is also the traditional implementation of wideband channelizer, is to simply use a single-channel channelizer for each channel. A few applications require that an input signal be... 

In numerous scientific disciplines, analyzing a system often fails to reveal significant relationships between its various variables. However, in certain instances, changes in one variable can influence the behavior of one or more other variables. Systems where such underlying causal relationships exist are referred to as causal systems. The process of inferring the structure of these systems is known as causal learning. In causal learning, given observed samples from a system and under certain assumptions, the joint distribution of the variables can determine the equivalence class of their corresponding graphical model. Once the equivalence class is identified, interventions are employed to... 

The use of polymers is increasing day by day due to low density, reasonable price and ability to produce different products. On the other hand, the accumulation of polymer wastes in nature is one of the environmental concerns in today's world, which is mainly due to the widespread use of polymers in the packaging industry and disposable applications. In order to solve this problem, recycling is recommended as the most appropriate and economical solution. Because in addition to consuming polymer waste, it also saves energy and reduces carbon footprint.Polyethylene terephthalate (PET) is one of the polymeric materials which; It has a special place in the packaging industry and is widely used... 

The improved properties of nanocomposites are not achievable with conventional composites. Scale effect is one the most important parameters in the physical and mechanical properties of polymeric nanocomposites. One of the physical phenomena, which can be related to the scale effect, is the very large interface between the nanoparticles and the polymeric matrices. Motional behavior and conformation of polymeric chains change near the nanoparticles surfaces. Due to high interface of the nanoparticles with the polymeric matrices the amount of these types of changes in the polymeric chains are so large that can change the physical and mechanical properties of polymeric nanocomposites. In this... 

In the field of high-pressure material science, diverse carbon systems under pressure have been intensively studied with interest in synthesizing new phases. A variety of these synthetic phases which have met various applications in today technology are called the amorphous diamond. The pressure-induced structural transition of carbonaceous material to amorphous diamond is realized by shock compression and rapid quenching. The shock compression and rapid quenching generate the high pressure (several GPa) and the temperature (several hundred K) in a fraction of a microsecond.Since the mechanical and electrical properties of the synthetic diamond are severely sensitive to the atomic structure,... 

The behavior of boundary layer under the effect of the sweep angle is considered. The measurements were performed by a pitot tube rake. Three models with various sweep angels at angles of attack -2, 0 and 2 degree were tested. Both tip and root of all wings were closed by flat plates in order to prevent the flow to roll-up. However the flow field on the wing was still three-dimensional because of the sweep angle. The velocity on the wing has two components; longitudinal and lateral. The cross flow emerges due to the non-equilibrium of pressure and centrifugal forces. The velocity profiles showed that the magnitude of cross flow was stronger near the leading edge of the wing. The cross flow... 

Drug-eluting bone implant coatings is a new era that has gained a lot of attention in recent years. In this matter, drug is loaded in the coating and local and targeted release of the drug results in preventing the side effects of implantation and increasing the healing process of the patient. The aim of this project was to synthesis the antibiotic eluting chitosan-based composite using electrophoretic deposition for bone implant coating. By using electrophoretic deposition chitosan and chitosan-bioglass composite coatings were synthesized. Then the probability of loading of drug into coating by using electrophoretic deposition was evaluated and by using this process chitosan and... 

The numerical solution of differential equations in high dimensions has always been a challenge and has been associated with various computational difficulties. These equations appear naturally in a variety of problems such as financial mathematics, control, and physics, and their optimal solution with high accuracy and speed can open new windows on new applications. Conventional methods such as Finite element and finite difference method in high dimensions lose their efficiency, which is a barrier to fast and accurate calculation of these equations. In this dissertation first, we review some theoretical and practical aspects of deep neural networks and then we try to examine the recent... 

Confining nematic liquid crystal between two curved boundary conditions while the nematic molecules have a degenerate planar anchoring leads to complex and beautiful textures of molecular disparagement(defect) in the bulk and on the surfaces. Such the liquid crystal shells are made with double-emulsion techniques in microfluidic devices have provided applications for micro-scale colloidal linkers.In this work, we have numerically minimized the elastic energy in one-constant approximation in present of Fournier’s degenerate surface potential with finite element method. The nematic shell is confined between two spherical surfaces that we have studied the final energies and their related... 

DNA is the most important biological molecule which contains all the genetic information of living organisms. The mechanical behavior of this molecule has a significant role on its functions. In this study, we introduce a model to for DNA nanomechanics. This model is called rigid base-pair chain in which every base pair is considered as a rigid object. The base-pairs only interact with their nearest neighbors via a harmonic potential. We have used this model to study the nanomechanical behavior of the DNA such as its bending, twisting, and stretching elasticity. Also the model was successful to predict the structure of DNA minicircles with extra amount of twist. After that we used the model... 

Hydroxyapatite is the most substantial inorganic constituent of bone tissue which displays splendid biocompability and bioactivity. Nevertheless, its mechanical properties is not utmost appropriate for a bone substitutes. Therefore, it is used to improve the mechanical properties of polymer matrix composite scaffolds. In the present work polycaprolactone as a polymeric matrix was employed to fabricate hydroxyapatite-polycaprolactone biocomposite scaffolds via in situ route. Solvothermal method was employed to synthesize in situ hydroxyapatite in polymer matrix. Porous scaffolds were fabricated via freeze-drying/porogen leaching. Physical, mechanical (compressive module and compressive... 

Biometric identification systems have become key components in data security and protecting sensitive information. Biometric methods, such as fingerprint recognition, have replaced traditional authentication methods due to their high security and efficiency. However, challenges like the potential to forge have highlighted the need for the development of more robust methods. A new approach in this field is the use of electroencephalography signals for identity verification, which not only provides high security but can also enhance the safety of brain-computer interfaces In this study, we introduce a cueless imagined speech paradigm based on natural word selection, where users select and...