Loading...
Search for: safavi--mohammad-reza
0.176 seconds

    Two-dimensional Numerical Simulation of Bubble Bursting in the Vicinity of a Corner, Using DIM Interfacial Modeling

    , M.Sc. Thesis Sharif University of Technology Safavi, Mohammad Mahdi (Author) ; Taeibi Rahni, Mohammad (Supervisor) ; Salimi, Mohammad Reza (Co-Supervisor)
    Abstract
    Bubble collapse is a two-phase problem whose numerical simulation has many important applications in science and technology. In hydrodynamics systems (pumps, ship propellers, …), bubbles form due to cavitation. These bubbles grow and collapse These bubbles grow and collapse farther downstream and their energy destroys the surrounding walls. In medical sciences, the shear force caused by collapse of a bubble can be used to destroy adipose tissues in arteries. The small scales time in this phenomenon, as well as the compressibility of the flow in bubble collapse, are interesting challenges researchers face. The present thesis targets are two-dimensional numerical simulation of bubble collapse... 

    Design and Manufacture Controller and Converter of Standard G-Code for CNC Hexaglide

    , M.Sc. Thesis Sharif University of Technology Safavi Gerdini, Kaveh (Author) ; Alasty, Aria (Supervisor) ; Movahedi, Mohammad Reza (Supervisor)
    Abstract
    Typical Numerical Control Machines, mainly are made a mechanism with axes perpendicular to each other. Because of lower weight, the parallel mechanisms are focused by CNC manufacturers. the Hexaglide mechanism is popular in parallel mechanisms used in CNC.Today, software of Solid modelling, generate G-Codes but this Codes works for conventional Numerical Control machines. for use of this G-Code for Parallel Mechanism CNC, a new controller should be designed to convert the standard G-Code motion command for Hexaglide CNC.The End of this project, is design and manufacture a controller for Hexaglide CNC that convert conventional G-Code for that and initiate drivers.Finally, the controller is... 

    A misbehavior‐tolerant multipath routing protocol for wireless Ad hoc networks [electronic resource]

    , Article International Journal of Research in Wireless Systems (IJRWS) ; Vol. 2, Issue 9, pp. , Sep. 2013 Sedghi, H. (Haniyeh) ; Pakravan, Mohammad Reza ; Aref, Mohammad Reza ; Sharif University of Technology
    Abstract
    Secure routing is a major key to service maintenance in ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. As a result of the resource limitations in such networks nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a novel data redirection method to mitigate the impact of node misbehavior on network... 

    Production of New Nanocomposites for Neutron and Gamma Shielding and Modeling of the Attenuation Phenomena Using Computational Methods

    , M.Sc. Thesis Sharif University of Technology Safavi, Mohammad Reza (Author) ; Outokesh, Mohammad (Supervisor) ; Vosoughi, Naser (Supervisor) ; Kiani, Mohammad Amin (Co-Supervisor)
    Abstract
    If nuclear radiation is not weakened and absorbed, it can cause serious damage to human devices or the environment. Dual-purpose dry casks are one of the sources of nuclear radiation production as a place to keep the spent fuel assemblies. One of the ways to protect against them is to use shield. One of the most common of them is composite shield. The composite used in this study has a polymer matrix. The matrix of the used polymer is epoxy resin. In this study, two separate composites have been made to attenuate neutron and gamma radiation. In this thesis, first, by using the MCNPX code, the necessary simulations for the design and construction of composite shields have been carried out.... 

    A CDN Architecture to be used in SDN

    , M.Sc. Thesis Sharif University of Technology Afshar Safavi, Roohollah (Author) ; Hemmatyar, Ali Mohammad Afshin (Supervisor)
    Abstract
    In recent years, the usage of Internet bandwidth has been increased by emerging applications such as Video on Demand (VoD).As the popularity of VoD increases among the Internet users, some new problems like bandwidth limitations and congestion embark. For solving mentioned problems, Content Delivery Networks (CDN) has been introduced. Using CDN approaches either in ISP or organization is also known as Telco CDN. Generally implementing CDN approaches to process all requests either in ISP or organization can cause bottleneck. On the other hand, Software Defined Networks (SDN) could bring us new tools and opportunities which enables us to implement novel methods to confront these problems.... 

    Analysis and Improvement of Intrusion Detection Methods in Data Network Routers

    , M.Sc. Thesis Sharif University of Technology Jamshidi, Mohammad Ali (Author) ; Aref, Mohammad Reza (Supervisor) ; Pakravan, Mohammad Reza (Co-Advisor)
    Abstract
    High-quality online services demand reliable and fast packet delivery at the network layer. However, clear evidence documents the existence of compromised routers in the ISP and enterprise networks, threatening network availability and reliability. A compromised router can stealthily drop, modify, inject, or delay packets in the forwarding path to launch Denial-of-Service, surveillance, man-in-the-middle attacks, etc. So researches tried to create intrusion detection methods to identify adversarial routers and switches. To this end, data-plane fault localization (FL) aims to identify faulty links and is an effective means of achieving high network availability. FL protocols use... 

    Topological Defects in Confined Nematics by Planar Anchoring

    , M.Sc. Thesis Sharif University of Technology Seyed Nejad, Reza (Author) ; Ejtehadi, Mohammad Reza (Supervisor) ; Mozaffari, Mohammad Reza (Supervisor)
    Abstract
    Confining nematic liquid crystal between two curved boundary conditions while the nematic molecules have a degenerate planar anchoring leads to complex and beautiful textures of molecular disparagement(defect) in the bulk and on the surfaces. Such the liquid crystal shells are made with double-emulsion techniques in microfluidic devices have provided applications for micro-scale colloidal linkers.In this work, we have numerically minimized the elastic energy in one-constant approximation in present of Fournier’s degenerate surface potential with finite element method. The nematic shell is confined between two spherical surfaces that we have studied the final energies and their related... 

    Improvement of Routing Security in Ad Hoc Networks Against Several Attacks

    , M.Sc. Thesis Sharif University of Technology Sedghi, Hanie (Author) ; Aref, Mohammad Reza (Supervisor) ; Pakravan, Mohammad Reza (Supervisor)
    Abstract
    Secure routing is a major key to service maintenance in wireless ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. Wormhole attack is one of the most severe active attacks to mobile ad hoc networks. Noting the resource limitations in such networks, nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a... 

    Solving Symmetric Nonlinear Equations System Using BFGS Trust Region Quadratic Method

    , M.Sc. Thesis Sharif University of Technology Salimi, Samira (Author) ; Razvan, Mohammad Reza (Supervisor) ; Peyghami, Mohammad Reza (Supervisor)

    Design and Implementation of 2.5 Gbps Circuit Switching Fabric

    , M.Sc. Thesis Sharif University of Technology Jahani, Sohrab (Author) ; Pakravan, Mohammad Reza (Supervisor) ; Movahhedy, Mohammad Reza (Supervisor)
    Abstract
    Providing high bandwidth network infrastructures for ever increasing need of data transport is of great importance. The underling infrastructure for many communication services such as GSM/3G/4G mobile networks and Internet services is Synchronous Digital Hierarchy (SDH) optical transport systems. SDH are standardized protocols that multiplex multiple lower rate digital bit streams, such as E1 and Ethernet, and transfer them synchronously over optical fiber using lasers or LEDs. In addition to high data transfer rates, flexible network management and protection mechanisms have great importance, hence are part of SDH standards. In order to obtain flexible network architecture and protected... 

    Preserving Privacy in Smart Grid

    , M.Sc. Thesis Sharif University of Technology Vahedi, Erfaneh (Author) ; Aref, Mohammad Reza (Supervisor) ; Pakravan, Mohammad Reza (Co-Advisor)
    Abstract
    Development of Smart Grid and deployment of smart meters in large scale has raised a lot of concerns regarding customers’ privacy. Consequently, several schemes have been proposed to overcome the above mentioned issue. These schemes mainly rely on data aggregation as a method of protecting users’ privacy from the grid operators. However, the main problem with most of these schemes is the fact that they require a large amount of processing power at the meter side. This, together with the fact that smart meters don’t usually have a powerful processor, can cause the unavailability of smart meter data at the required time for operators of the grid, and at the same time disables smart meters from... 

    Effect of the Geometry of Colloidal Particles on Nematic Liquid Crystals

    , Ph.D. Dissertation Sharif University of Technology Hashemi, Masoumeh (Author) ; Ejtehadi, Mohammad Reza (Supervisor) ; Mozaffari, Mohammad Reza (Co-Advisor)
    Abstract
    A liquid crystal is a state of matter composed of highly anisotropic building blocks. When liquid crystals are exposed to surfaces with given shapes and anchoring conditions, the orientation of their molecules gets spatially disordered and topological defects may form in the system. The interplay between liquid crystals and the geometry and topology of the colloidal particles has motivated extensive recent studies.In this thesis, we present the numerical modeling results for two faceted colloidal particles in a thermotropic nematic liquid crystal. To obtain the equilibrium nematic field with a finiteelement method, we numerically minimize the free energy of the system that based on the... 

    Mechanical Design of an Anthropometric Lower Extremity Exoskeletal System

    , M.Sc. Thesis Sharif University of Technology Safavi, Sahba (Author) ; Meghdari, Ali (Supervisor)
    Abstract
    The main scope of this research is to develop an anthropometric lower extremity exoskeleal system in a virtual environment for augmentation purposes. The main challenge in the process of doing this research is to employ the biomechanical analysis of the human locomotion to provide the necessary background information for the design of devices that closely mimic the dynamics of the operator's motion. In this case, the appropriate degrees-of-freedom and associated range of motions for each joint should be determined. In addition, the kind of necessary actuators and measurement systems should be selected based on the muscle torque consumption analysis provided by a musculoskeletal model,... 

    Design and Implementation of a Spectrum Sensor for Cognitive Radio

    , M.Sc. Thesis Sharif University of Technology Safavi, Mahya (Author) ; Shabani, Mahdi (Supervisor)
    Abstract
    Frequency scarcity has emerged the necessity of opportunistic utilization of frequency bands, which can be realized through a cognitive radio system. During an agile communication between unlicensed users, a cognitive radio system must avoid collision with licensed users. Hence it should continuously observe the band of interest and report the presence of licensed user signals. This task is fulfilled by a vital part of a cognitive radio system, called the spectrum sensing core. Recently several techniques have been proposed for the spectrum sensing in literature. Some of them like matched filtering, cyclostationarity based detection are based on primary user signal features. However energy... 

    Numerical Simulation of Forced Impregnation in a Thick Capillary Tube

    , M.Sc. Thesis Sharif University of Technology Safavi, Mohammad (Author) ; Mousavi, Ali (Supervisor)
    Abstract
    Drop penetration into the capillary tube, as a classical problem, has been studied over 100 years. But there are a few studies that investigate forced impregnation of capillary tubes, which has major application in coating, inkjet printing and rain drop penetration into the soil, have been made. A comprehensive numerical investigation on millimeter droplet impact dynamics on a thick capillary tube with micrometer sized pore is conducted and validated against experimental data. This work is extended to oblique impact of drops into pores and normal impact on nanoscaled pores. We apply the finite volume numerical method to solve the time-dependent governing equations of continuity, momentum in... 

    Environmental Impact of Seawater on GGBFS-Based Alkali-Activated Concrete

    , M.Sc. Thesis Sharif University of Technology Safavi, Alireza (Author) ; Toufigh, Vahab (Supervisor)
    Abstract
    This study seeks to compare the effect of curing conditions in the sea, coast, and middle of the island environment on five mix designs of alkali-activated concrete (AAC) based on ground granulated blast furnace slag (GGBFS) and fly ash (FA) and the effect of the ratio of sodium silicate (SS) to sodium hydroxide (SH) and alkali activated solutions (AAMS) to the binder on mechanical properties. The compressive strength and load-deflection test was conducted to obtain uniaxial compressive strengths (UCS), modulus of elasticity ("E" _"S" ), elastic and ultimate strain, and dissipated energy. The most significant decrease in strength was observed in the coastal area and the sea. Also, the... 

    Solving Nonlinear Systems of Mixed Iqualities and Inequalities Via Trust Region Quadratic Methods

    , M.Sc. Thesis Sharif University of Technology Ghasemi, Shojaeddin (Author) ; Razvan, Mohammad Reza (Supervisor) ; Payghami, Mohammad Reza (Supervisor)

    Jamming Resilient Algorithms for Rendezvous in Cognitive Radio Networks

    , M.Sc. Thesis Sharif University of Technology Rezaei, Roohollah (Author) ; Aref, Mohammad Reza (Supervisor) ; Pakravan, Mohammad Reza (Co-Advisor)
    Abstract
    Dynamic spectrum access with the aid of cognitive radio (CR) technology is a viable solution to spectrum scarcity. There are many military and emergency applications that require the use of cognitive radio ad-hoc networks (CRAHNs). In these net- works, nodes must first find each other in a wide spectrum and then exchange their desired data. The process of finding each other in a multichannel environment is a challenging task and is usually known as rendezvous. Since rendezvous is the first step in communication, disrupting will disable the nodes from establishing proper communication sessions. That results in a drastic degrade in the performance of the network. Therefore, it is important to... 

    Numerical Study of Spray Impingement to Solid Wall

    , M.Sc. Thesis Sharif University of Technology Abbasi Chenari, Fatemeh (Author) ; Morad, Mohammad Reza (Supervisor) ; Jahannama, Mohammad Reza (Co-Supervisor)
    Abstract
    Spray-wall impingement is one of the phenomenon that associated in different subject such as spray cooling, combustion chamber and gas turbine. With the impingement of spray to the wall, liquid film begins to form. Wall film characteristics is still an important subject to study. Due to the various stages of liquid film formation from injection of spray till spray-wall impingement, the investigation of this phenomenon is far more complicated. This paper is meant to provide detailed data on spray-wall impingement and wall film formation physics with the help of computational analysis of OpenFOAM . A Lagrangian-Eulerian method based on discrete phase model (DPM) was employed to model... 

    Assessing and Improving Algorithms to Control the Propagation of Light through Scattering Media

    , M.Sc. Thesis Sharif University of Technology Fayyaz, Zahra (Author) ; Rahimitabar, Mohammad Reza (Supervisor) ; Nasiriavanaki, Mohammad Reza (Supervisor)
    Abstract
    Light propagation through turbid media, such as biological tissues, experience scattering due to inhomogeneous distribution of refractive indices of their microscopic structure. Scattering and diffusion of light not only limit many optical imaging techniques, but are also big challenges for telecommunication, spectroscopy, and other optical techniques. Recently many new imaging methods are developed that work in strongly scattering media such as optical coherence tomography, diffusion tomography, and laser speckle velocimetry. In this thesis, we have studied how wavefront shaping techniques can tackle the problem of scattering. By spatially shaping the wavefront of the incident beam, using...