Sharif Digital Repository

Different attacks on routing protocols in ad hoc networks occur that one of the most dangerous types is called wormhole attack. This attack happens with the assistance of at least two or more malicious nodes. In this attack nodes create a private tunnel which if a packet comes to one of them, it will be guided to other pair of these malicious nodes by this tunnel and that node broadcasts it into network. This action provides a short connection in the network that is controlled by these malicious nodes. Hence they control all Packets that come to them and threaten the security of data within packets or delete them. Totally, what a wormhole does is an incorrect understanding of network... 

Secure routing is one of the most important topics in the wireless MANETs networks. MANETs networks don't have a central infrastructure for the management of routing in the networks. Each node independently routes and sends packets, so many attacks such as forging, modifying, and denial of service (DoS), Occur in these networks. In this paper, we present the new protocol, SEAODV; Secure Efficient Ad-hoc on Demand Routing Protocol for MANETs networks. SEAODV is based on the AODV algorithm and in comparison with existing secure AODV protocols such as SAODV, ARAN and SEAR have improved security and performances. SEAODV uses HEAP authentication Scheme with symmetric cryptography and one-way hash... 

Different attacks on routing protocols in ad hoc networks occur that one of the most dangerous types is called wormhole attack. This attack happens with the assistance of at least two or more malicious nodes. In this attack nodes create a private tunnel which if a packet comes to one of them, it will be guided to other pair of these malicious nodes by this tunnel and that node broadcasts it into network. This action provides a short connection in the network that is controlled by these malicious nodes. Hence they control all Packets that come to them and threaten the security of data within packets or delete them. Totally, what a wormhole does is an incorrect understanding of network... 

The inertial microfluidic technique, as a powerful new tool for accurate cell/particle separation based on the hydrodynamic phenomenon, has drawn considerable interest in recent years. Despite numerous microfluidic techniques of particle separation, there are few articles in the literature on separation techniques addressing external outlet geometry to increase the throughput efficiency and purity. In this work, we report on a spiral inertial microfluidic device with high efficiency (>98%). Herein, we demonstrate how changing the outlet geometry can improve the particle separation throughput. We present a complete separation of 4 and 6 μm from 10 μm particles potentially applicable to... 

As requirements and environments become much more complex, the need for self-adaptive and self-healing software system grows. There are several existing works which present such systems by using different approaches. Using alternative solutions to provide a service or requirement is one of the most important approaches among existing works. In this paper an alternative-based approach for adding self-adaptive capabilities to software systems is proposed. In this approach a group of autonomic elements will be constructed based on different design or implementations that could be considered for a specific service or requirement. By using this approach, a highly adaptive software system could be... 

In recent years, mobile social networks have largely been developed and gained considerable popularity. An approach to protecting privacy on mobile social networks is the use of encryption and access control. Good alternatives for use on mobile social networks are the Public Broadcast Encryption approach for appropriate concordance and consistency with the structure of social networks as well as the Attribute-Based Encryption owing to its capability and proper implementation of the access control policy. Accordingly, in this paper, a framework was presented based on the Public Broadcast Encryption and Attribute-Based Encryption. Using proxies, we outsourced some of these operations in the... 

In the recent years, popularity and number of users of mobile social networks have grown significantly. Due to different types of communication on these networks, users share a lot of information with each other. One of the most critical challenges of social networks is disclosure and unauthorized access to information, data, and communication between users that is a kind of violation of their privacy, which can be done by social network providers, especially unauthorized users. One way to protect one's privacy is using encryption. Therefore, in the present paper, an improved secure design was presented for mobile social network using ciphertext-policy attribute-based encryption (CP-ABE) and... 

Dealing with crosscutting requirements in software development usually makes the process more complex. Modeling and analyzing of these requirements in the software architecture facilitate detecting architectural risks early. Distributed systems have more complexity and so these facilities are much useful in development of such systems. Aspect oriented Architectural Description Languages(ADL) have emerged to represent solutions for discussed problems; nevertheless, imposing radical changes to existing architectural modeling methods is not easily acceptable by architects. Software architecture analysis methods, furthermore, intend to verify that the quality requirements have been addressed... 

Yttria-stabilized tetragonal zirconia polycrystals (Y-TZP) have been widely applied in fixed partial prostheses as well as dental uses i.e. a substructure for crowns. However, Y-TZP has limited applications, which is due to the presence of defects in its microstructure introduced during the manufacturing process. Accordingly, due to Y-TZP limitations, the novel (X)Y-TZP- 20Al2O3-(80-X) SiO2 (X = 65, 70 and 75) ceramic nanocomposites were successfully fabricated via the powder metallurgy method. X-ray diffraction (XRD) patterns of commercial powders showed the stabilization of monoclinic zirconia (ZM) by increasing the silica content. In order to determine the fracture load and micro-bending... 

In this paper, we address global non-fragile control and synchronization of a new fractional order chaotic system. First we inspect the chaotic behavior of the fractional order system under study and also find the lowest order (2.49) for the introduced dynamics to remain chaotic. Then, a necessary and sufficient condition which can be easily extended to other fractional-order systems is proposed in terms of Linear Matrix Inequality (LMI) to check whether the candidate state feedback controller with parameter uncertainty can guarantee zero convergence of error or not. In addition, the proposed method provides a global zero attraction of error that guarantees stability around all existing... 

The first step to locate Partial Discharge in power transformers is to find a model that can clearly explain the behavior of the winding in high-frequency. The detailed model is one of the models used for the study of PD. One of the fundamental problems of the described model is to find its parameters. And the accuracy in calculating these parameters has significant impact on reducing the simulation error and PD locating. The current paper seeks to calculate the parameters of the detailed model 20kv distribution transformer winding by using the finite element method (FEM). Comparing the results of this model with pulse waveforms obtained from the PD to the winding in the laboratory... 

A single-degree-of-freedom model is considered for flexible exercise bars based on the lumped-element approach. By considering the side segment of a flexible bar as a cantilever beam with an equivalent mass at the free end, its free-vibration response, as well as the forced response under the excitation of the grip, are expressed parametrically. Experiments are performed on a particular flexible bar (FLEXI-BAR) in order to obtain numerical values for quantifying the model's parameters. The model is also computationally simulated to study the response of the flexible bar to various excitations. The results are imported into a multi-segment musculoskeletal software (AnyBody), where the effect... 

While the differentiation factors have been widely used to differentiate mesenchymal stem cells (MSCs) into various cell types, they can cause harm at the same time. Therefore, it is beneficial to propose methods to differentiate MSCs without factors. Herein, magnetoelectric (ME) nanofibers were synthesized as the scaffold for the growth of MSCs and their differentiation into neural cells without factors. This nanocomposite takes the advantage of the synergies of the magnetostrictive filler, CoFe 2 O 4 nanoparticles (CFO), and piezoelectric polymer, polyvinylidene difluoride (PVDF). Graphene oxide nanosheets were decorated with CFO nanoparticles for a proper dispersion in the polymer through... 

We have investigated the piezoelectric response of the hydrogenated graphene oxide (H-G-SiO2) stacks both experimentally and theoretically. The piezoresponse force microscopy method and density-functional theory (DFT) calculations were used to study the piezoresponse effect of this structure from both experimental and computational point of views. A mono-layer graphene, made by chemical vapour deposition method, is deposited on Si/SiO2 substrate and its surface is then functionalized with hydrogen atoms. The vertical piezoresponse, observed by piezoresponse force microscopy, is measured to be about 2146 pC N-1, that is comparable to the reported state of the art piezoelectric materials such... 

Design of an Ultra-Wideband 3-dB quadrature (90°) Hybrid using ADS and HFSS softwares plus Measurement report are presented. Simultaneous Use of these two softwares lead to fast and accurate design procedure. The coupler is realized in broadside stripline and with the connection of coupled regions in tandem structure. The measured data agrees well with the expected values from simulations, and shows a good ultra wide bandwidth response over the frequency range of 1-10 GHz. Measurements showed an amplitude unbalance of ±1.5 dB, a phase unbalance of 90°±7° , and an isolation and a return loss characteristics of more than 14 dB over the frequency of 1 to 10 GHz