Loading...
Search for:
safian-boldaji--m
1.412 seconds
Total 20428 records
New surfactant extracted from Zizyphus Spina-Christi for enhanced oil recovery: Experimental determination of static adsorption isotherm
, Article Journal of the Japan Petroleum Institute ; Volume 56, Issue 3 , 2013 , Pages 142-149 ; 13468804 (ISSN) ; Shahri, M. P ; Zargartalebi, M ; Arabloo, M ; Sharif University of Technology
2013
Abstract
A fundamental chemical enhanced oil recovery (EOR) process is surfactant flooding in which the key mechanism is to reduce interfacial tension between oil and the displacing fluid and hence mobilizing the trapped oil. Surfactant loss by adsorption is one of the most important criteria that governs the economics of the surfactant flooding methods. In addition to this, detrimental effects and high price of currently used surfactants cause EOR process so expensive and unfeasible. This study is aimed to introduce a novel kind of plant based surfactant which is extracted from Zizyphus Spina-Christi tree. In addition, equilibrium adsorption behavior of this novel biosurfactant in aqueous solution...
Economic Analysis of Producing Methanol from Kish Gas Field
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
Iran with the second largest gas reserves in the world makes the importance of Kish Island more vital. Kish gas field, with a capacity of 67 trillion cubic meters gas, is one of the main hubs of Iran gas production. One of the uses of natural gas is to produce petrochemical goods such as Methanol. In this thesis the focus is on economical evaluation of producing Methanol for amount of 5,000 tons per day from Kish gas field. As a result, the required feed has been estimated about 150 million cubic feet per day and the net capital investment calculated to be 941 million US dollars. The initial estimate of Direct Permanent Investment (DPI) was calculated to be $590.8 million. Having considered...
Multiple Model Predictive Control of Methyl Methacrylate/Vinyl Acetate Synthesis Reactor
, M.Sc. Thesis Sharif University of Technology ; Pishvaie, Mahmoud Reza (Supervisor)
Abstract
The purpose of this study is the implementation of multi-model predictive control (MMPC) approach for the co-polymerization system of methyl methacrylate - vinyl acetate. Simpler development of local models and controllers and also convenience of understanding the model and controller structure are the main reasons for using this approach. In the first step, RGA analysis has been used for pairing input and output variables. Then the performance of PI controller on the system has been investigated. For designing model predictive controller (MPC) the nonlinear model has been linearized at operational point and the controller has been designed in MPC toolbox of MATLAB software R2013a. In the...
How will your tweet be received? predicting the sentiment polarity of tweet replies
, Article 15th IEEE International Conference on Semantic Computing, ICSC 2021, 27 January 2021 through 29 January 2021 ; 2021 , Pages 370-373 ; 9781728188997 (ISBN) ; Monajem, M ; Christlein, V ; Heinrich, P ; Nicolaou, A ; Naderi Boldaji, H ; Lotfinia, M ; Evert, S ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2021
Abstract
Twitter sentiment analysis, which often focuses on predicting the polarity of tweets, has attracted increasing attention over the last years, in particular with the rise of deep learning (DL). In this paper, we propose a new task: predicting the predominant sentiment among (first-order) replies to a given tweet. Therefore, we created RETwEET, a large dataset of tweets and replies manually annotated with sentiment labels. As a strong baseline, we propose a two-stage DL-based method: first, we create automatically labeled training data by applying a standard sentiment classifier to tweet replies and aggregating its predictions for each original tweet; our rationale is that individual errors...
Numerical Investigation of Droplet Generation in a Microfluidic Flow-Focusing Junction Aiming High-Throughput Droplet Generation
, M.Sc. Thesis Sharif University of Technology ; Taghipoor, Mojtaba (Supervisor) ; Hosseini, Vahid (Supervisor)
Abstract
Droplet microfluidic platform generates monodisperse droplets in a desired size through immiscible multiphase flows inside microchannels. Droplets are individual reactor and can be used for bio(chemical) analyses. Also, for materials fabrication, droplet microfluidics offers a versatile platform for generation of nano- or micro-sized particles and microcapsules that are widely used in drug delivery. In addition to the monodispersity, high-throughput generation is also necessary in many applications. Therefore, droplets must be formed in stable regimes (dripping and squeezing) in the highest possible frequency. In this study, the flow-focusing geometry, which is the most common geometry in...
Health Monitoring and Damage Detection of Marine Structure
, M.Sc. Thesis Sharif University of Technology ; Seif, Mohammad Saeed (Supervisor) ; Behzad, Mehdi (Supervisor)
Abstract
Structural health monitoring is a process that aims to provide accurate and immediate information about the condition and performance of the structure. Processed is a very important eld in the eld of civil, aerospace and marine engineering, because the use of structural health monitoring allows us to increase human and environmental safety while reducing economic damage. e main component of the health monitoring process is the real-time reconstruction of displacement and three-dimensional stress in the structure using a network of strain gauges and other sensors. e inverse nite element method is a relatively new method and stress measurement that has been shown to be fast and accurate for...
Probability of missed detection as a criterion for receiver placement in MIMO PCL
, Article IEEE National Radar Conference - Proceedings, 7 May 2012 through 11 May 2012, Atlanta, GA ; 2012 , Pages 0924-0927 ; 10975659 (ISSN) ; 9781467306584 (ISBN) ; Chitgarha, M. M ; Radmard, M ; Nayebi, M. M ; Sharif University of Technology
IEEE
2012
Abstract
Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar
An efficient method for the ring opening of epoxides with aromatic amines by Sb(III) chloride under microwave irradiation
, Article Journal of Chemical Research ; Issue 4 , 2008 , Pages 220-221 ; 03082342 (ISSN) ; Hashemi, M. M ; Mottaghi, M. M ; Foroughi, M. M ; Sharif University of Technology
2008
Abstract
SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity
Resource allocation for uav-enabled integrated sensing and communication (isac) via multi-objective optimization
, Article ICASSP, IEEE International Conference on Acoustics, Speech and Signal Processing - Proceedings ; Volume 2023-June , 2023 ; 15206149 (ISSN); 978-172816327-7 (ISBN) ; Naghsh, M. M ; Karbasi, M ; Nayebi, M. M ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2023
Abstract
In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit...
MIMO radar signal design to improve the MIMO ambiguity function via maximizing its peak
, Article Signal Processing ; Volume 118 , 2016 , Pages 139-152 ; 01651684 (ISSN) ; Radmard, M ; Nazari Majd, M ; Karbasi, S. M ; Nayebi, M. M ; Sharif University of Technology
Elsevier
2016
Abstract
One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function...
Detection-localization tradeoff in MIMO radars
, Article Radioengineering ; Volume 26, Issue 2 , 2017 , Pages 581-587 ; 12102512 (ISSN) ; Radmard, M ; Chitgarha, M. M ; Bastani, M. H ; Nayebi, M. M ; Sharif University of Technology
2017
Abstract
Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance...
Antenna placement and power allocation optimization in MIMO detection
, Article IEEE Transactions on Aerospace and Electronic Systems ; Vol. 50, Issue 2 , April , 2014 , pp. 1468-1478 ; Chitgarha, M. M ; Majd, M. N ; Nayebi, M. M ; Sharif University of Technology
2014
Abstract
It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive...
Ambiguity function of MIMO radar with widely separated antennas
, Article Proceedings International Radar Symposium ; 16 -18 June , 2014 ; ISSN: 21555753 ; Chitgarha, M. M ; Nazari Majd, M ; Nayebi, M. M ; Sharif University of Technology
2014
Abstract
There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas
Choosing the position of the receiver in a MISO passive radar system
, Article European Microwave Week 2012: "Space for Microwaves", EuMW 2012, Conference Proceedings - 9th European Radar Conference, EuRAD 2012 ; 2012 , Pages 318-321 ; 9782874870293 (ISBN) ; Majd, M. N ; Radmard, M ; Nayebi, M. M ; Sharif University of Technology
2012
Abstract
By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only...
Adaptive filtering techniques in passive radar
, Article Proceedings International Radar Symposium, Dresden ; Volume 2 , June , 2013 , Pages 1067-1078 ; 21555753 (ISSN) ; 9783954042234 (ISBN) ; Radmard, M ; Majd, M. N ; Nayebi, M. M ; Sharif University of Technology
2013
Abstract
One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared
Ambiguity function based receiver placement in multi-site radar
, Article 2016 CIE International Conference on Radar, RADAR 2016, 10 October 2016 through 13 October 2016 ; 2017 ; 9781509048281 (ISBN) ; Chitgarha, M. M ; Nazari Majd, M ; Nayebi, M. M ; Sharif University of Technology
2017
Abstract
It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite...
Improving MIMO radar's performance through receivers' positioning
, Article IET Signal Processing ; Volume 11, Issue 5 , 2017 , Pages 622-630 ; 17519675 (ISSN) ; Radmard, M ; Nazari Majd, M ; Nayebi, M. M ; Sharif University of Technology
Institution of Engineering and Technology
2017
Abstract
By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the...
Silylation of hydroxy groups with HMDS under microwave irradiation and solvent-free conditions
, Article Phosphorus, Sulfur and Silicon and Related Elements ; Volume 177, Issue 2 , 2002 , Pages 289-292 ; 10426507 (ISSN) ; Saidi, M. R ; Bolourtchian, M ; Heravi, M. M ; Sharif University of Technology
2002
Abstract
Phenols and alcohols are silylated with hexamethyldisilazane (HMDS) under microwave irradiation in solvent-free condition in good to excellent yields
Dynamic analysis of carbon nanotubes under electrostatic actuation using modified couple stress theory
, Article Acta Mechanica ; Vol. 225, Issue 6 , June , 2014 , pp. 1523-1535 ; Online ISSN: 1619-6937 ; Rastgoo, A ; Ahmadian, M. T ; Mashhadi, M. M ; Sharif University of Technology
2014
Abstract
Modified couple stress theory is a size-dependent theorem capturing the micro/nanoscale effects influencing the mechanical behaviors of the micro- and nanostructures. In this paper, it is applied to investigate the nonlinear vibration of carbon nanotubes under step DC voltage. The vibration, natural frequencies and dynamic pull-in characteristics of the carbon nanotubes are studied in detail. Moreover, the effects of various boundary conditions and geometries are scrutinized on the dynamic characteristics. The results reveal that application of this theory leads to the higher values of the natural frequencies and dynamic pull-in voltages
White space regions
, Article Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 22 January 2011 through 28 January 2011, Novy Smokovec ; Volume 6543 LNCS , 2011 , Pages 226-237 ; 03029743 (ISSN) ; 9783642183805 (ISBN) ; Fazli, M ; Ghodsi, M ; Safari, M ; Saghafian, M ; Tavakkoli, M ; Sharif University of Technology
2011
Abstract
We study a classical problem in communication and wireless networks called Finding White Space Regions. In this problem, we are given a set of antennas (points) some of which are noisy (black) and the rest are working fine (white). The goal is to find a set of convex hulls with maximum total area that cover all white points and exclude all black points. In other words, these convex hulls make it safe for white antennas to communicate with each other without any interference with black antennas. We study the problem on three different settings (based on overlapping between different convex hulls) and find hardness results and good approximation algorithms