Sharif Digital Repository

I present an in-depth review of the trends and the directions taken by researchers worldwide in optical code-division multiple-access (OCDMA) systems. I highlight those trends and features that I believe are essential to the successful introduction of various OCDMA techniques in communication systems and data networks in the near future. In particular I begin by giving a comprehensive review of the construction of optical orthogonal codes (OOCs). Specifically I discuss the recently developed algorithms that are based on matrix algebra, which simplify and enhance the efficiencies of algorithms in OOC generation. In communication systems studies I first focus on and discuss various OCDMA... 

Autocorrelation receiver (AcR) is usually used as the general receiver for transmitted reference (TR) communication systems on a quite intuitive basis. In this paper, we apply the principle of statistical invariance to obtain the optimum TR receiver on a decision-theoretic basis, and it is shown that the autocorrelation receiver is optimal only in a special case. Performance of the optimum receiver and the suboptimum AcR for some important modulation schemes is also evaluated. The results imply that allocating a part of the transmitted energy and bandwidth to reference pulses would not help improve the performance of the system and the optimal performance might be achieved via much simpler... 

In this article we present a new scheme to support multirate and multi-quality-of-service transmission in passive optical networks based on a hybrid wavelength-division multiplexing/optical code-division multiplexing scheme. The idea is to use multilength variable-weight optical orthogonal codes as signature sequences of a hybrid WDM/OCDM system. To provide the requested classes of service, the code weight and code length of MLVW-OOCs are designed based on the characteristics of the requested classes of service. In order to mitigate multiple access interference, we propose to utilize a multilevel signaling technique and interference remover structure based on advanced optical logic gate... 

In this paper, we study theoretically the generation of high repetition rate short pulses using fiber optical parametric amplification. We show that the pulse shape and duration depend on the signal location relatively to the pump frequency. We demonstrate that in order to get the shortest pulse width, the signal must be located at one of the extremities of the gain spectrum associated with the pump peak power. We derive the analytical expression of the pulse shape in this case and compare it to the exponential gain regime case. Using numerical simulations, we also analyze the impact of walk-off and pump phase modulation that is required to suppress Stimulated Brillouin Scattering and derive... 

In this study the authors present an in-depth study, analysis and discussion on maximum likelihood (ML)-based receiver for a typical spectrally encoded spread-time CDMA in the presence of multiple narrowband interference (NBI) signals in an additive white Gaussian noise channel. Furthermore, the authors demonstrate that by combining useful properties of ML-based receiver and three-level codes, that is, codes with values of -1, 0, +1, the authors can introduce a new strategy in which superior performance with respect to previous receiver structure based on two-level codes, that is, codes with values of -1, +1, can be attained. With the help of an example, the authors drive, first, the... 

The High-Performance Light Water Reactor (HPLWR) is the European version of the advance nuclear energy power plant at Supercritical-pressure. A light water reactor at supercritical pressure, being currently under design, is the new generation of nuclear reactors. The aim of this study is to predict the HPLWR neutronic behavior of the axial enrichment profile with an average enrichment of 5 w/o U-235. Neutronic calculations are performed using WIMS and CITATION codes. Changes in neutronic parameter, such as Power Peaking Factor (PPF) are discussed in this paper  

A positioning system for underwater users is proposed based on the underwater wireless optical CDMA network. Two different localization schemes namely Received Signal Strength (RSS) and Time of Arrival (TOA) are discussed and their performances in the presence of optical turbulence are explored. © 2017 IEEE  

In this paper, we propose an accurate visible light indoor localization system for a smartphone using the commercial light-emitting diode (LED) panels which are used primarily for lighting. Each of designed lighting panel contains a space-colorcoded identifier, a matrix with a unique pattern of spatially separated colored LEDs, for labeling different positioning cells while the lighting color is kept white by balancing the number of different sets of colored LEDs. The advantage of this idea is that we do not use the time-frequency domain of visible light communication (VLC) networks resources for positioning signaling. Our positioning technique called geometrical optics positioning algorithm... 

Recently, metasurfaces capable of manipulating the amplitude and the phase of an incident wave in a broad frequency band have been employed for femtosecond optical pulse shaping purposes. In this study, we introduce a phase-only pulse shaper based on an all-dielectric CMOS-compatible polarization-insensitive metasurface, composed of Si nano cylinders sitting on a fused silica substrate. The required phase profile of the metasurface for desired waveforms are calculated using an iterative Fourier transform algorithm, and the performance of the pulse shaper metasurface in implementing the phase masks was assessed using full-wave simulations. Such approach for realizing a... 

Recently, metasurfaces capable of manipulating the amplitude and the phase of an incident wave in a broad frequency band have been employed for femtosecond optical pulse shaping purposes. In this study, we introduce a phase-only pulse shaper based on an all-dielectric CMOS-compatible polarization-insensitive metasurface, composed of Si nano cylinders sitting on a fused silica substrate. The required phase profile of the metasurface for desired waveforms are calculated using an iterative Fourier transform algorithm, and the performance of the pulse shaper metasurface in implementing the phase masks was assessed using full-wave simulations. Such approach for realizing a... 

The Hopfield network is studied from the standpoint of taking it as a computational model in optimizing the fuel management of pressurized water reactors (PWRs). In this paper, the flattening of the neutron flux is considered as the objective function. By this consideration, the power peaking inside the reactor core is also minimized. Regarding the local minimum problem of Hopfield network, the simulated annealing method is applied to improve the Hopfield solution. The method is applied to Bushehr Nuclear Power Plant (PWR design) and the result is compared with the core configuration purposed by the designer  

This paper presents a new method to solve the problem of finding the best configuration of fuel assemblies in a pressurized water reactor (PWR) core. Finding the optimum solution requires a huge amount of calculations in classical methods. It has been shown that the application of continuous Hopfield neural network accompanied by simulated annealing method to this problem not only reduces the amount of calculations, but also guarantees finding the best solution. In this study flattening of neutron flux inside the reactor core of Bushehr NPP is considered as the objective function. The result is the optimum configuration which is in agreement with the pattern proposed by the designer. © 2001... 

Despite the huge potential, value predictors have not been used in modern processors. This is partially due to the complex structures associated with such predictors. In this paper we study value predictors and investigate solutions to reduce storage requirements while imposing negligible coverage cost. Our solutions build on the observation that conventional value predictors do not utilize storage efficiently as they allocate too much space for small and frequently appearing values. We measure data width requirement and entropy in a subset of predictor resources and show that values stored in predictors show limited sizes and very small entropy. We exploit this behavior and suggest... 

Embedded systems are usually energy constrained. Moreover, in these systems, increased productivity and reduced time to market are essential for product success. To design complex embedded systems while reducing the development time and cost, there is a great tendency to use commercial off-the-shelf ("COTS") devices. At system level, dynamic voltage and frequency scaling (DVFS) is one of the most effective techniques for energy reduction. Nonetheless, many widely used COTS processors either do not have DVFS or apply DVFS only to processor cores. In this paper, an easy-to-implement COTS-based evaluation platform for low-energy embedded systems is presented. To achieve energy saving, DVFS is... 

Azerbaijani and Turkish are two closely-related languages from Oguz branch of Turkic languages, which are said to be mutually intelligible. Regarding this background, we designed an experiment within the framework of receptive multilingualism to investigate the role of linguistic factors in intelligibility of the Turkish language to Iranian Azerbaijanis. The study was carried out by controlling extra-linguistic factors such as language contact and negative attitude in order to make the findings attributable to only linguistic factors as the main focus of the present study. In the study, 40 native speakers of Azerbaijani in Iran were exposed to the Turkish language through short videos... 

Given the significant number of the studies conducted to explore construct validity, adopting various approaches, and the paucity of the studies that employed the experimental approach to validation, the current study was aimed at exploring the adequacy of the experimental approach to construct validation, drawing upon advertising literacy as the construct of the researchers’ concern. To this end, the researchers pursued the experimentation, test administration, and validation phases, respectively. To identify the effect of the experimentation, an independent samples t-test was run; there was a significant difference between the experimental and control groups. The closing phase was devoted... 

Given the importance and complexity of the three-dimensional (3D) neutron transport equation solution, in the current research, a new Modular Ray Tracing (MRT) Algorithm and 3D characteristic kernel for heterogeneous structures are presented. Improvement of memory management and cache coherency are achieved to some acceptable level. Also, parallel implementation of transport algorithm utilizing OpenMP, cause significant reduction in runtime. To validate our Algorithm, first, a self-constituted pin cell and a lattice arrangement are modeled and results are compared with Monte-Carlo simulation. Second, the well-known 3D benchmark, Takeda model one and two, are investigated and results compared... 

Mixed-Criticality (MC) systems have recently been devised to address the requirements of real-time systems in industrial applications, where the system runs tasks with different criticality levels on a single platform. In some workloads, a highcritically task might overrun and overload the system, or a fault can occur during the execution. However, these systems must be fault-tolerant and guarantee the correct execution of all highcriticality tasks by their deadlines to avoid catastrophic consequences, in any situation. Furthermore, in these MC systems, the peak power consumption of the system may increase, especially in an overload situation and exceed the processor Thermal Design Power...