Sharif Digital Repository

I present an in-depth review of the trends and the directions taken by researchers worldwide in optical code-division multiple-access (OCDMA) systems. I highlight those trends and features that I believe are essential to the successful introduction of various OCDMA techniques in communication systems and data networks in the near future. In particular I begin by giving a comprehensive review of the construction of optical orthogonal codes (OOCs). Specifically I discuss the recently developed algorithms that are based on matrix algebra, which simplify and enhance the efficiencies of algorithms in OOC generation. In communication systems studies I first focus on and discuss various OCDMA... 

The main aim of this study was to improve current efficiency and to obtain thicker coatings via aluminum oxide (Al2O3) addition to the chromium (Cr) (III) bath. Design/methodology/approach ‐ Pure Cr and nanocomposite Cr–Al2O3 coatings were electrodeposited from Cr (III) bath onto cathode copper substrates by conventional method. Dependence of current efficiency to current density, Al2O3 content and particle size were investigated. Findings ‐ Current efficiency increased with Al2O3 amount and decreased with Al2O3 particle size. Maximum current efficiency was achieved at 25 A/dm2 for pure Cr and 30 A/dm2 for composite coatings. Al2O3 bath content, current density and stirring rate increased... 

Using 3-D scanned data to analyze and extract pore network plays a vital role in investigation of porous media's characteristics. In this paper, a new simple method is developed to detect pores and throats for analyzing the connectivity and permeability of the network. This automated method utilizes some of the common and well-known image processing functions which are widely accessible by researchers and this has led to an easy algorithm implementation. In this method, after polishing and quality control of images, using city-block distance function and watershed segmentation algorithm, pores and throats are detected and 3-D network is produced. This method can also be applied on 2-D images... 

Cr and Cr-Al2O3 coatings were electrodeposited from Cr(III) bath with both pulsating and direct current onto copper substrates. Pulsating current resulted in homogeneous films of higher Al2O3 content and lower particle agglomeration than the direct current. Differences were more tangible at shorter duty cycles and pulse frequencies. Pulsating current improved both microhardness and corrosion resistance. The presence of alumina nanoparticles resulted in greater current efficiency, higher film microhardness and better corrosion resistance. Maximum current efficiency, highest microhardness and densest electrodeposited coatings were achieved at current density of 20 A dm-2, duty cycle of 40% and... 

Autocorrelation receiver (AcR) is usually used as the general receiver for transmitted reference (TR) communication systems on a quite intuitive basis. In this paper, we apply the principle of statistical invariance to obtain the optimum TR receiver on a decision-theoretic basis, and it is shown that the autocorrelation receiver is optimal only in a special case. Performance of the optimum receiver and the suboptimum AcR for some important modulation schemes is also evaluated. The results imply that allocating a part of the transmitted energy and bandwidth to reference pulses would not help improve the performance of the system and the optimal performance might be achieved via much simpler... 

In this article we present a new scheme to support multirate and multi-quality-of-service transmission in passive optical networks based on a hybrid wavelength-division multiplexing/optical code-division multiplexing scheme. The idea is to use multilength variable-weight optical orthogonal codes as signature sequences of a hybrid WDM/OCDM system. To provide the requested classes of service, the code weight and code length of MLVW-OOCs are designed based on the characteristics of the requested classes of service. In order to mitigate multiple access interference, we propose to utilize a multilevel signaling technique and interference remover structure based on advanced optical logic gate... 

I present an in-depth review of the trends and the directions taken by researchers worldwide in optical code-division multiple-access (OCDMA) systems. I highlight those trends and features that I believe are essential to the successful introduction of various OCDMA techniques in communication systems and data networks in the near future. In particular I begin by giving a comprehensive review of the construction of optical orthogonal codes (OOCs). Specifically I discuss the recently developed algorithms that are based on matrix algebra, which simplify and enhance the efficiencies of algorithms in OOC generation. In communication systems studies I first focus on and discuss various OCDMA... 

In this study the authors present an in-depth study, analysis and discussion on maximum likelihood (ML)-based receiver for a typical spectrally encoded spread-time CDMA in the presence of multiple narrowband interference (NBI) signals in an additive white Gaussian noise channel. Furthermore, the authors demonstrate that by combining useful properties of ML-based receiver and three-level codes, that is, codes with values of -1, 0, +1, the authors can introduce a new strategy in which superior performance with respect to previous receiver structure based on two-level codes, that is, codes with values of -1, +1, can be attained. With the help of an example, the authors drive, first, the... 

In this article, design of an adaptive control scheme for a class of uncertain single-input single-output systems in strict feedback form via a backstepping technique has been proposed. It is assumed that system output and its derivatives are available. By virtue of the observability concept, it is shown that for this class of systems there exists a one-to-one map, which maps output and its derivatives to system states. By means of this mapping and using linearly parametrised approximators, such as fuzzy logic systems or neural networks, the uncertain nonlinear dynamics and unavailable states are estimated. The proposed adaptive controller guarantees that the closed-loop system is uniformly... 

Despite the huge potential, value predictors have not been used in modern processors. This is partially due to the complex structures associated with such predictors. In this paper we study value predictors and investigate solutions to reduce storage requirements while imposing negligible coverage cost. Our solutions build on the observation that conventional value predictors do not utilize storage efficiently as they allocate too much space for small and frequently appearing values. We measure data width requirement and entropy in a subset of predictor resources and show that values stored in predictors show limited sizes and very small entropy. We exploit this behavior and suggest... 

Embedded systems are usually energy constrained. Moreover, in these systems, increased productivity and reduced time to market are essential for product success. To design complex embedded systems while reducing the development time and cost, there is a great tendency to use commercial off-the-shelf ("COTS") devices. At system level, dynamic voltage and frequency scaling (DVFS) is one of the most effective techniques for energy reduction. Nonetheless, many widely used COTS processors either do not have DVFS or apply DVFS only to processor cores. In this paper, an easy-to-implement COTS-based evaluation platform for low-energy embedded systems is presented. To achieve energy saving, DVFS is... 

Self-regulated learning, strangely enough, though having swept educational psychology’s literature like a tidal wave and also, compared to other constructs such as metacognition and learning strategies, has remained rather uncharted in language education literature and L2 research. Hence, among the main purposes of the current study was to form a link, even tenuous, between the two fields by developing a questionnaire in English and Persian to measure self-regulated language learning capacity and behaviour of Iranian EFL learners. The development of the inventory was guided by two pilots (412 participants), content validation by expert judgment, cognitive interviews, expert review of the... 

In this paper, an adaptive fuzzy controller, based on backstepping technique, has been proposed for temperature control of a general class of continuous stirred tank reactors (CSTRs). Using the observability concept, an adaptive fuzzy controller using temperature measurement has been designed. A fuzzy logic system is used to estimate the concentration dependent terms and other unknown system parameters appearing in the control law. It is shown that the closed loop system is asymptotically stable and influences of minimum approximation error and external disturbance on the L2 norm of the output tracking error can be attenuated arbitrarily. The performance of the proposed controller has been... 

Azerbaijani and Turkish are two closely-related languages from Oguz branch of Turkic languages, which are said to be mutually intelligible. Regarding this background, we designed an experiment within the framework of receptive multilingualism to investigate the role of linguistic factors in intelligibility of the Turkish language to Iranian Azerbaijanis. The study was carried out by controlling extra-linguistic factors such as language contact and negative attitude in order to make the findings attributable to only linguistic factors as the main focus of the present study. In the study, 40 native speakers of Azerbaijani in Iran were exposed to the Turkish language through short videos... 

Given the significant number of the studies conducted to explore construct validity, adopting various approaches, and the paucity of the studies that employed the experimental approach to validation, the current study was aimed at exploring the adequacy of the experimental approach to construct validation, drawing upon advertising literacy as the construct of the researchers’ concern. To this end, the researchers pursued the experimentation, test administration, and validation phases, respectively. To identify the effect of the experimentation, an independent samples t-test was run; there was a significant difference between the experimental and control groups. The closing phase was devoted... 

Polymer sintering is not only a well-established procedure for producing functional polymeric parts, but it is also the basis for the relatively new additive manufacturing technique, selective laser sintering. Although studying the impact of thermo-oxidative degradation during sintering has significant practical importance, few studies have focused on this aspect of the sintering process. In the present work, we have investigated the active thermo-oxidative degradation mechanisms during sintering of high-density polyethylene (HDPE) particles, the conditions that promote them, and their respective impact on the morphological evolution of the polyethylene particles. To perform a comprehensive... 

In this paper, the general problem of impedance control for a robotic manipulator with a moving flexible base is addressed. Impedance control imposes a relation between force and displacement at the contact point with the environment. The concept of impedance control of flexible base mobile manipulator is rather new and is being considered for first time using singular perturbation and new sliding mode control methods by authors. Initially slow and fast dynamics of robot are decoupled using singular perturbation method. Slow dynamics represents the dynamics of the manipulator with rigid base. Fast dynamics is the equivalent effect of the flexibility in the base. Then, using sliding mode...