Sharif Digital Repository

Photocatalytic membrane reactors (PMRs), coupling photocatalysts and membranes in a single system, have shown a considerable potential to reduce membrane fouling, which is one of the major drawbacks of using membranes to treat water and wastewater. In this study, the visible light-activated photocatalysts were incorporated into the polyacrylonitrile (PAN) casting solution to synthesize the photocatalytic composite membranes. The physicochemical properties and the morphology of the membranes and photocatalysts were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffraction analysis (XRD), ultraviolet–visible diffuse reflectance... 

The coupling of photocatalysis with membrane technology, which is known as photocatalytic membrane reactors (PMRs), has received great consideration in recent years and become a promising approach with the high potential to improve the fouling of membranes. In this paper, the photocatalyst of g-C3N4 treated with H2O2 was incorporated with a polysulfone membrane to enhance the anti-fouling properties of the membrane. AFM, FE-SEM images, porosity, and contact angle analysis indicated that the membrane properties like hydrophilicity, porosity, and surface roughness were improved. Also, UV–visible DRS, PL spectra, EIS analysis confirmed that the treated g-C3N4 (H2O2-g-C3N4) had high light... 

In this paper we propose a method for CBIR based on the combination of texture, edge map and color. As texture of edges yields important information about the images, we utilized an adaptive edge detector that produces a binary edge image. Also, using the statistics of color in two different color spaces provides complementary information to retrieve images. Our method is time efficient since we have applied texture calculations on the binary edge image. Our experimental results showed both the higher accuracy and lower time complexity of our method with similar related works using SIMPLIcity database  

The pipe-spool fabrication process is a critical operational section in the piping projects that usually used to accelerate and discipline the installation process, especially, when we have a particular deadline for the project. For this reason, the fast and optimal scheduling of the fabrication activities with considering the real conditions and using manual or traditional methods is a significant problem for the decision-makers. In this paper, we use a novel linear programming model to schedule the spool fabrication activities based on the flexible job shop scheduling problem (FJSP). Because FJSP is a challengeable NP-hard problem, we solve the proposed mathematical model with a heuristic... 

Blood cell segmentation is a crucial part of many medical and laboratory procedures such as cell counting and blood cell disorder diagnosis. Among different types of blood cells, white blood cells are the most important clinically, as they suffer greatest from blood disorders. In this paper we propose a method for automatic segmentation of white blood cells nucleus. A distinctive function is used in YCbCr color space to segment the white blood cells nucleus. Next, the sub-images are extracted which contain the whole body of white blood cell nucleus. Then an active contour method is applied to the sub-images extracted from the previous step to accurately segment the cell nucleus boundary. Our... 

Dopamine is one of the most important neurotransmitters released by neurons in the central nervous system, and a variety of neurological illnesses and mental disorders are associated with impairments in the secretion and functionality of dopamine. Dopamine, depending on the type of receptors, can act as a stimulant or an inhibitor. In this study, dendrimer-conjugated dopamine was utilized as a chelating agent for Technetium-99m to investigate the organ distribution of this compound in vivo using the single-photon emission computed tomography (SPECT) technique. For this purpose, dendrimers were synthesized using polyethylene glycol diacid and citric acid precursors, and dopamine was... 

Four 5-, 10-, 20- and 30-story moment frames, representing low-, mid-, and two high-rise structures, were subjected to a great number of idealized directivity pulses. The amplitudes and periods of pulses vary from 0.02 g to 1.0 g and 0.5 to 12 sec, respectively. Over 1400 nonlinear dynamic analyses of low- to high-rise moment frames were performed which were feasible through using modified fish-bone model. The distribution of interstory drift along the height was studied and two applied contours were proposed: (i) the maximum interstory drift contour, and (ii) the critical story contour. These contours were demonstrated versus the ratio of natural period of the structure to the pulse period... 

In this article singular points of a parallel manipulator are obtained based on a novel geometrical method. Here we introduce the constrained plain method (CPM) and some of its application in parallel mechanism. Given the definition of constraint plane (CP) and infinite constraint plane (ICP) the dependency conditions of constraints is achieved with the use of a new theorem based on the Ceva geometrical theorem. The direction of angular velocity of a body is achieved by having three ICPs with the use of another theorem. Finally, with the use of the above two novel theorems singularities of the 3UPF_PU mechanism are obtained. It should be emphasized that this method is completely geometrical,... 

An analytical model is proposed to study the effect of particle size on melting enthalpy and entropy of metallic nanoparticles (NPs). The Mott's and Regel's equations for melting entropy in the combination of core average coordination number (CAC) and surface average coordination number (SAC) of freestanding NPs are considered. Clusters of icosahedral (IC), body centered cubic (BCC), and body centered tetragonal (BCT) structure without any vacancies and defects are modeled. Using the variable coordination number made this model to be in good agreement with experimental and molecular dynamic (MD) results of different crystal structures. The model predicts melting entropy and enthalpy of... 

Grinding is widely used for manufacturing of components that require fine surface finish and good dimensional accuracy. In this study a thermo-mechanical finite element analysis is conducted to find out how grinding parameters can affect temperature and residual stress distribution in the workpiece. Results of parametric study presented in this work indicate, by carefully selecting the grinding parameters, minimum thermal and mechanical damage can be achieved. Higher workpiece velocities produce higher surface residual stress. By increasing depths of cut, depth of tensile residual stresses increases. Convection heat coefficient does not have any considerable effect on surface residual stress... 

Adaptive Noise Cancellation (ANC) is a well-known technique for background noise reduction in automobile and vehicular environments. The noise fields in automobile and other vehicle interior obey the diffuse noise field model closely. On the other hand, the ANC does not provide sufficient noise reduction in the diffuse noise fields. In this paper, a new multistage post-filter is designed for ANC as a solution to diffuse noise conditions. The designed post-filter is a single channel Linear Prediction (LP) based speech enhancement system. The LP is performed by an adaptive lattice filter and attempts to extract speech components by using intermediate ANC signals. The post-filter has no... 

Shot peening is widely used to improve the fretting fatigue strength of critical surfaces. Fretting fatigue occurs in contacting parts that are subjected to fluctuating loads and sliding movements at the same time. This paper presents a sequential finite element simulation to investigate the shot peening effects on normal stress, shear stress, bulk stress and slip amplitude, which are considered to be the controlling parameters of fretting damage. The results demonstrated that among the modifications related to shot peening, compressive residual stress has a dominant effect on the fretting parameters  

One-dimensional (1D) MgO structures were successfully synthesized via carbothermic reduction of mechanically activated mixture of MgO and graphite. Mechanical activation of source materials before carbothermic reduction can substantially enhance the formation of MgO products at a temperature (1000 °C) relatively lower than that required in previous approaches (≥1200 °C). However, the morphology of MgO formed is dependent on the degree of mechanical activation and the condition of the subsequent carbothermic reduction. Two distinctive morphologies were found for MgO products synthesized using our method: single crystalline nanorods with rectangular cross-sections whose diameters range from 50... 

Attitude and vibration control of a general form of flexible satellites is addressed in this paper. Partial differential dynamic equations are derived considering new details such as multi sectioned solar panels and elastic connections between main hub and solar panels. Boundary control approach is adopted to eliminate simplification errors of discrete models, using just one actuator in the hub. Asymptotic stability of attitude dynamics is proved for a group of boundary controllers and necessary conditions for asymptotic stability of vibrations are discussed. Being independent of modeling accuracy and using easily measurable feedbacks are among advantages of the proposed class of... 

Characterization and calcination behavior of a low-grade manganese ore, as a part of Mn ferroalloys production, was studied by XRF, ex-situ XRD, in-situ XRD, and SEM-EDS techniques. Calcination experiments were carried out at and up to 900 °C (1173 K) in air and argon atmospheres. The samples were in particles and powder forms. The results indicated that both quartz and calcite phases in the ore exhibit a bimodal spatial distribution; as relatively large regions and finely distributed in the Mn- and Fe-containing phases. By Rietveld analysis of the in-situ XRD data, the reactions occurring upon heating during the calcination process were deduced. Thermal decomposition and reactive diffusion... 

Estimating the position of a mobile set is of great importance in new mobile services. However, in most cases, the accuracy should be less than 100 meters. This accuracy is hard to reach especially in urban areas. The main problem is that there are a lot of obstacles like buildings between the BTS and the mobile set. Thus the time measured between BTS and the mobile set is somehow greater than the time it takes the wave to travel directly between two points. This paper introduces an optimized solution for TDOA as one of the most efficient ways for finding the location of a mobile phone. Considering the standards and limitations of both GSM and UMTS, the Authors present a solution for...