Sharif Digital Repository

Carbon nanotubes have special thermodynamic properties which makes suitable as a thermo-acoustic sound source. Recently it is shown that by using these nanotubes it is possible to generate strog sound waves in air or water. Experimental analysis of phenomenon can be complicated and expensive. Hence this fact, in this study using molecular dynamic simulation, numerical analysis of sound generation with CNTs in air and water is discussed. For this purpose, the required structue of the system is generated and it has reaced equilibrium. This process has been done for 6 different CNT and for each CNT there are 5 different distances between them. Althogether, 30 different cases has is used for... 

Optical bistability is one of the most important results of nonlinear optics. The term optical bistability refers to the situation in which two different output intensities are possible for a given input intensity. Interest in optical bistability stems from its potential usefulness as a switch for use in optical communication and in optical computing. Optical bistability is resulted by nonlinear phenomena such as kerr effect, two photon absorption and saturable absorber. In this thesis, we study the optical bistability in a double-coupler ring resonator, in which the right half of ring is made of an erbium doped fiber amplifier for compensating the loss by the gain of EDFA, and the left half... 

The use of superhydrophobic surfaces is one the most promising methods for reducing the friction and increasing the flow rate in fluid transfer systems. Since in such systems the surface structure plays a key role, in the first part of this study, the performance of the hierarchical nanostructures is explored. These nanostructures are inspired by the superhydrophobic surface of the lotus leaf. The flow is considered between two walls with hierarchical nanostructures and simulate the system via the molecular dynamics (MD) method. The size of the nanostructures and the distance between them have been studied to find whether a design with maximum flow rate exists. The nanostructures have two... 

WO3 is known as a photocatalyst in the visible light region, but with lower efficiency compared to more interesting semiconductor photocatalysts such as TiO2 and ZnO. Many attempts have been done to increase the efficiency of this photocatalyst by incorporating metal and metal oxide nanoparticles or recently carbon nanotubes.On the other hand, application of graphene, as an unrolled carbon nanotube, for increasing the photocatalytic activity of TiO2 and ZnO has shown positive results. Furthermore, it was reported that such semiconductor photocatalysts (and very recently WO3) can photocatalytically reduce the chemically exfoliated graphene oxide sheets under UV-vis irradiation.
In this... 

Graphene is a one layer atom thickness and zero energy gap so for using it in nano electronic and transistors baised on graphene it's energy gap should be opened.one of the methods for opening graphene band gap is creating nano scale boundaries or synthesize graphene nanoribbons. One of the new methods for graphene nanoribbon synthesize is longitudinal opening of carbon nanotube. In this thesis graphene nanoribbons synthesize with this method and analyze with AFM and Raman spectroscopy. Carbon nanotubes also have energy gap and IR absorption recently they used for living cell destruction. In this thesis we synthesize graphene nanoribbons and analyzing their optical absorption and use it for... 

TiO2 is known as a photocatalyst in near UV-Visible light region with better efficiency compared to other semiconductor photocatalysts. Many attempts have been done to increase the efficiency of this photocatalyst. also, application of 2D carbon nanostructures namely graphene for increasing the photocatalytic activity of TiO2 has shown positive results.
In this research, we first synthesized Graphene Oxide (GO) suspension by exfolation of graphite oxide suspension. then we fabricated TiO2 thin films on glass substrates by so-called sol-gel method. finally we fabricate Graphene Oxide/TiO2 nanowalls composite films as a photocatalyst in visible light. X-ray photoelectron spectroscopy... 

Graphene nanogrids fabricated by graphene nanoribbons obtained through oxidative unzipping of multi-walled carbon nanotubes, used as two-dimensional selective templates for accelerated differentiation of human mesenchymal stem cells (hMSCs), isolated from umbilical cord blood, into osteogenic lineage. The biocompatible and hydrophilic graphene nanogrids showed high actin cytoskeleton proliferations that coinciding with patterns of the nanogrids. The amounts of proliferations found are slightly better than proliferation on hydrophilic graphene oxide (GO) sheets, and significantly higher than non-uniform proliferations on hydrophobic reduced graphene oxide (rGO) sheets and polydimethylsiloxane... 

One atom thick layer of pure carbon in bonded and hexagonal lattice is named graphene. graphene has unique mechanical, optical, thermal and electrical properties and because of these properties has grabbed attention. graphene has been made from high pure graphite by different methods such as CVD(chemical vapor deposition) , chemical exfoliation , micromechanical cleavage and colloidal suspension. through these methods, green methods for synthesis of graphene, using eco-friendly reductants during synthesis of graphene instead of hydrazine and recently using waste(not graphite) are attractive for synthesis of graphene. Following this idea , a group has produced graphene from wastes such as... 

Graphene oxide is a single sheet of Carbon atoms which has been arranged on a two-dimensional honeycomb lattice. Functional groups such as epoxy, carboxyl and carbonyl are located on basal plane and at the edges of graphene oxide and they localize electrons on the surface of graphene oxide and open band gap in its band structure. Pure graphene has zero band gap, so existence of fluorescence properties is unlikely; but graphene oxide has fluorescence properties due to band gap in its band structure. Fluorescence properties of graphene have been used in live cell imaging and drug delivery, so study and increasing of fluorescence properties is significantly important. The purpose of this... 

Graphene is a two dimensional lattice which is created from carbon atoms. Having special feature, it has such various medical usage, for example in diagnosing and treating cancer. Adding a particular factor to graphene could improve their efficiency. In comparis on with graphene itself, graphene oxide and reduced graphene oxide are much more successful in diagnosing and treating than others because of their higher hygroscopic. Recent studies state that hydrogenized combinations including hydrogenized graphene show desired results. Due to its higher hygroscopic and the possibility of adherence to the cells, hydrogenized graphene could be very effective in diagnosing and treating the sarcomas.... 

This study discusses about mass customization and optimization of supply network in which both goal considering to set the flow of raw material and final product to satisfy the customer demand. The mass customization is more important concept in this study, so that this goal is placed to the first objective. In this research, the model which contained both goal is presented. The model focus on mass customization and try to satisfy various products demand, which constitute 3 kind of speed demands. Each product can satisfy in 3 way: fast, normal, slow.In the first model the new approach present in which the speed affects all of supplying, manufacturing and distributing system. The system try... 

Knowledge Based Firms are considered to be important for the economic development of a country in regards to both employment growth and innovative activity. The latter is believed to contribute significantly to the increase in productivity and therefore the competitiveness of Iran’s economy. This study contributes to the above literature by investigating the factors that are believed to treat the growth of such firms in Iran. The purpose of this study is to identify functional risks of vital signs monitors via Fault Tree Analysis (FTA) method to use as a guide for manufacturers to identify and control hazards. Therefore, 30 knowledge based firms were selected as sample. Then, based on a... 

The Internet is often used for communication-based applications such as online banking, stock trading, and shopping where service interruption is unacceptable. Thus, analysis of the impact of the failures of hardware, software, and related services’ performance quality of the service provided to users is of importance to designers and managers in these functions. In this study, we developed a strategy to the design of a dynamic combination of file servers with the aim of providing reliability and SLA. At first, we examine the reasons for the violation of service level in file host services and datacenters, and then we introduce the criteria to measure the violation of service level on the...