Loading...
Search for: samadi--s
0.164 seconds

    Experimental and analytical investigation of concrete confined by external pre-stressed strips

    , Article Concrete Repair, Rehabilitation and Retrofitting II - Proceedings of the 2nd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR, 24 November 2008 through 26 November 2008, Cape Town ; 2009 , Pages 375-376 ; 9780415468503 (ISBN) Moghaddam, H ; Mohebbi, S ; Samadi, M ; Sharif University of Technology
    2009
    Abstract
    Strengthening is often a necessary measure to overcome an unsatisfactory deficient situation or where a new code requires the structure or a member of it to be modified to achieve new requirements. In the engineering practice such restraint to lateral dilation, indicated by the name of confinement, has been traditionally provided to compression members through steel transverse reinforcement in the form of spirals, circular hoops or rectangular ties. Steel and concrete jackets are other techniques for providing additional confinement for compression members, too. This paper presents the results of experimental and analytical study on the application of strapping technique for retrofitting of... 

    Backscattering-based detection scheme for dark-field optical tweezers

    , Article Journal of the Optical Society of America B: Optical Physics ; Volume 36, Issue 6 , 2019 , Pages 1587-1593 ; 07403224 (ISSN) Samadi, A ; Mousavi, S. M ; Hajizadeh, F ; Reihani, S. N. S ; Sharif University of Technology
    OSA - The Optical Society  2019
    Abstract
    Laser nanomanipulation by metallic nanoparticles, which are smaller than the diffraction limit, has become a great interest, especially in the manipulation of unstained biological samples. However, they are hard to image in bright-field microscopy, because of the diffraction limit. Thus, incorporation of a dark-field microscopy technique with optical tweezers would be an inevitable choice, enforcing the use of the backward scattering detection scheme. Here in this paper, we have taken into account the reflected light from the coverslip along with backscattered light from the trapped particle to validate and reveal some precautions of using this detection scheme, based on Mie-Debye... 

    Simultaneous determination of theophylline, theobromine and caffeine in different tea beverages by graphene-oxide based ultrasonic-assisted dispersive micro solid-phase extraction combined with HPLC-UV

    , Article RSC Advances ; Vol. 4, issue. 87 , 2014 , p. 47114-47120 Sereshti, H ; Khosraviani, M ; Samadi, S ; Amini-Fazl, M. S ; Sharif University of Technology
    2014
    Abstract
    A simple ultrasound-assisted dispersive micro-solid phase extraction method based on graphene-oxide (GO) nanosorbents (UAD-μ-SPE), followed by high performance liquid chromatography-ultraviolet detection (HPLC-UV) was developed for the simultaneous determination of theophylline, theobromine and caffeine in different infusion tea samples. GO was synthesized by Hummers method and characterized with field emission-scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), and Fourier transform infrared (FT-IR) spectroscopy. The GO sorbent was dispersed in the sample solution with the assistance of ultrasound to enhance adsorption and desorption performance and rates. The main parameters... 

    Optimization of dispersive liquid-liquid microextraction and improvement of detection limit of methyl tert-butyl ether in water with the aid of chemometrics

    , Article Journal of Chromatography A ; Volume 1217, Issue 45 , November , 2010 , Pages 7017-7023 ; 00219673 (ISSN) Karimi, M ; Sereshti, H ; Samadi, S ; Parastar, H ; Sharif University of Technology
    2010
    Abstract
    Dispersive liquid-liquid microextraction (DLLME) coupled with gas chromatography-mass spectrometry-selective ion monitoring (GC-MS-SIM) was applied to the determination of methyl tert-butyl ether (MTBE) in water samples. The effect of main parameters affecting the extraction efficiency was studied simultaneously. From selected parameters, volume of extraction solvent, volume of dispersive solvent, and salt concentration were optimized by means of experimental design. The statistical parameters of the derived model were R 2=0.9987 and F=17.83. The optimal conditions were 42.0μL for extraction solvent, 0.30mL for disperser solvent and 5% (w/v) for sodium chloride. The calibration linear range... 

    Aluminum solvate complexes forming in acidic methanol-acetone mixtures studied by 27Al NMR spectroscopy

    , Article Journal of Solution Chemistry ; Volume 38, Issue 2 , 2009 , Pages 159-169 ; 00959782 (ISSN) Samadi Maybodi, A ; Pourali, S. M ; Tafazzoli, M ; Sharif University of Technology
    2009
    Abstract
    27Al NMR spectroscopy is a powerful tool for the study of coordination and solvation in both aqueous and nonaqueous solutions. In this study, the complexes coexisting upon dissolution of AlCl3 in acidic acetone + methanol solutions are shown to consist essentially of mixed hexacoordinated species of the general formula [Al(CH3OH) 6-n (CH3COCH3) n ]3+ (n=1,2 and 3), all exhibiting distinctly different 27Al shielding effects. The relative populations of the various mixed species are found to be highly dependent upon the acetone:methanol mole ratio that in the more acetone-rich mixtures with aluminum become appreciably coordinated by acetone. The results demonstrate that the key factor for the... 

    Behavior and modeling of concrete columns confined by external post-tensioned strips

    , Article 2008 Structures Congress - Structures Congress 2008: Crossing the Borders, Vancouver, BC, 24 April 2008 through 26 April 2008 ; Volume 314 , 2008 ; 9780784410165 (ISBN) Moghaddam, H ; Pilakoutas, K ; Samadi, M ; Mohebbi, S ; Sharif University of Technology
    American Society of Civil Engineers (ASCE)  2008
    Abstract
    This paper presents the results of experimental and analytical study on a new technique of seismic retrofitting of concrete columns. In this technique, standard strapping devices, which are used in the packaging industry, are used to post-tension metal strips around concrete columns. The two ends of the strip are tightened in sealed clamps to maintain the pre-stress force in the strip. Experimental program included axial compressive tests on 30 cylindrical as well as 30 prismatic small-scale columns which were actively confined by pre-stressed metal strips. Longitudinal and lateral strain of concrete and strain in the strips were monitored. Test Results showed significant increase in... 

    Blind source separation of discrete finite alphabet sources using a single mixture

    , Article IEEE Workshop on Statistical Signal Processing Proceedings, 28 June 2011 through 30 June 2011, Nice ; June , 2011 , Pages 709-712 ; 9781457705700 (ISBN) Rostami, M ; Babaie Zadeh, M ; Samadi, S ; Jutten, C ; Sharif University of Technology
    2011
    Abstract
    This paper deals with blind separation of finite alphabet sources where we have n sources and only one observation. The method is applied directly in time (spatial) domain and no transformation is needed. It follows a two stage procedure. In the first stage the mixing coefficients are estimated, and in the second stage the sources are separated using the estimated mixing coefficients. We also study restrictions of this method and conditions for which its performance is acceptable. Simulation results are presented to show the ability of this method to source separation in images and pulse amplitude modulation (PAM) signals  

    Biodegradation of polychlorinated biphenyls by lysinibacillus macrolides and bacillus firmus isolated from contaminated soil

    , Article International Journal of Engineering, Transactions B: Applications ; Volume 32, Issue 5 , 2019 , Pages 628-633 ; 1728144X (ISSN) Samadi, A ; Sharifi, H ; Ghobadi Nejad, Z ; Yaghmaei, S ; Sharif University of Technology
    Materials and Energy Research Center  2019
    Abstract
    Polychlorinated biphenyls (PCBs) cause many significant ecological problems because of their low degradability, high harmfulness, and solid bioaccumulation.Two bacterial strains were isolated from soil that had been polluted with electrical transformer liquid for more than 40 years. The isolates were distinguished as Lysinibacillus macrolides DSM54Tand Bacillus firmus NBRC15306Tthrough 16S rRNA sequencing analysis.This is the primary report of an agent of the genus Bacillus firmus equipped for the removal of PCBs. The strains could develop broadly on 2-Chlorobiphenyl and 2,4-dichlorobiphenyl. GC/MS analysis of individual congeners revealed up to 80% degradation of the xenobiotics in 96h,... 

    Evaluating the toxic effect of an antimicrobial agent on single bacterial cells with optical tweezers

    , Article Biomedical Optics Express ; Volume 6, Issue 1 , 2015 , Pages 112-117 ; 21567085 (ISSN) Samadi, A ; Zhang, C ; Chen, J ; Reihani, S. N. S ; Chen, Z ; Sharif University of Technology
    OSA - The Optical Society  2015
    Abstract
    We implement an optical tweezers technique to assess the effects of chemical agents on single bacterial cells. As a proof of principle, the viability of a trapped Escherichia coli bacterium is determined by monitoring its flagellar motility in the presence of varying concentrations of ethyl alcohol. We show that the “killing time” of the bacterium can be effectively identified from the correlation statistics of the positional time series recorded from the trap, while direct quantification from the time series or associated power spectra is intractable. Our results, which minimize the lethal effects of bacterial photodamage, are consistent with previous reports of ethanol toxicity that used... 

    27Al and 31P NMR investigations of soluble aluminophosphate species in alcohol-water mixtures

    , Article Journal of Solution Chemistry ; Volume 41, Issue 5 , 2012 , Pages 888-897 ; 00959782 (ISSN) Samadi Maybodi, A ; Nejad Darzi, S. K. H ; Tafazzoli, M ; Sharif University of Technology
    2012
    Abstract
    In this work, phosphorus-31 and aluminum-27 nuclear magnetic resonance techniques were used to characterize the distribution of soluble aluminophosphate species in methanol + water and ethanol + water mixtures. The assignment of the peaks to alu-minate species was attempted, clarifying earlier work and producing information on the different aluminophosphate complexes. Nine peaks were observed at -0.41, -6.4, -7.5, -7.9, -13.1, -13.9, -16.6, -18.1 and -20.6 ppm. Four new peaks appeared in the 31P NMR spectra of the alcoholic aluminophosphate solutions and their intensities changed with changes of the alcohol:water volume ratio. These new peaks were observed in the presence of methanol or... 

    Mechanical behavior modeling of nanocrystalline NiAl compound by a feed-forward back-propagation multi-layer perceptron ANN

    , Article Computational Materials Science ; Volume 44, Issue 4 , 2009 , Pages 1231-1235 ; 09270256 (ISSN) Yazdanmehr, M ; Mousavi Anijdan, S. H ; Samadi, A ; Bahrami, A ; Sharif University of Technology
    2009
    Abstract
    In this paper, an artificial neural network (ANN) model has been developed to predict the yield and tensile strengths of hot pressed NiAl intermetallic compound based on the experimental data from Albiter et al. [A. Albiter, M. Salazar, E. Bedolla, R.A.L. Drew, R. Perez, Mater. Sci. Eng. A 347 (2003) 154]. The predicted results, with a correlation relation between 0.9791 and 0.9921, show a very good agreement with the experimental values. Furthermore, the sensitivity analysis was performed to investigate the importance of the effects of chemical composition and temperature on the mechanical behavior of hot pressed NiAl intermetallic compound. © 2008 Elsevier B.V. All rights reserved  

    Seismic Retrofit of Reinforced Concrete Columns With Post-Tensioned Metal Strips

    , Ph.D. Dissertation Sharif University of Technology Samadi, Maysam (Author) ; Moghaddam, Hassan (Supervisor)
    Abstract
    This thesis presents the results of an experimental and analytical study on the application of the strapping technique for seismic retrofit of reinforced concrete columns. In this technique, the columns are externally confined by post-tensioned metal strips. In the first phase of the experiments, the compressive stress-strain behavior of strapped cylindrical and prismatic specimens was studied. Effects of several parameters were studied including shape and size of specimens, strength of plain concrete, mechanical characteristics of confining strips and the level of pre-tensioning of the strips. The second phase of the tests included studying the lateral performance of strapped RC columns.... 

    An Adaptive Multipath Ant Routing Algorithm for Mobile Ad HoC Networks

    , M.Sc. Thesis Sharif University of Technology Samadi, Shahrooz (Author) ; Beigy, Hamid (Supervisor)
    Abstract
    Mobile ad hoc networks (MANETs) are networks which consist entirely of mobile nodes, placed together in ad hoc manner, i.e. with minimal prior planning. In these networks, all nodes have routing capabilities and forward data packets for other nodes. Nodes can enter or leave the network at any time and may also be mobile. Hence, the network topology changes frequently. There are lots of challenges in these networks, which make routing to be a hard task. These challenges arise from the dynamic and unplanned nature of these networks such as unreliability of wireless communication, limited resources available in terms of bandwidth, processing capacity, network size, and etc. Due to these... 

    A Simulation Study of Graphene Nanoribbon Field Effect Transistor

    , M.Sc. Thesis Sharif University of Technology Samadi, Mohsen (Author) ; Faez, Rahim (Supervisor)
    Abstract
    In this thesis, a field effect transistor (FET) using armchair graphene nanoribbon as the channel is simulated, and the effects of changing nanoribbon width and length, as well as adding defects, are also studied. To obtain the Hamiltonian matrix and the energy band structure of graphene nanoribbon, tight binding method is used in which the first and third neighbor approximation is considered. Also, to maximize accuracy, we also considered the edge bond reconstruction. To obtain the transport characteristics of the transistor, such as the transmission coefficient and the density of states (DOS), Poisson and Schrodinger equations are solved self-consistently. We used the nonequilibrium... 

    Improving Security of Flash-Based Solid State Disks

    , M.Sc. Thesis Sharif University of Technology Samadi, Nasibeh (Author) ; Asadi, Hossein (Supervisor)
    Abstract
    One of the most intrinsic challenges of flash-based Solid State Drives (SSDs) is erasebefore-write limitation and the limited endurance of flash chips. Wear leveling and garbage collection are two mechanisms implemented in SSD’s controller to enhance endurance and performance. While wear leveling attempts to distribute erasures across all blocks in an even manner, it imposes a new security challenge on SSD,which leads to the presence of invalid data blocks in flash chips. Therefore, some data blocks that are logically deleted by the user are still available in flash chips and can be recovered by software or hardware recovery tools.
    In this paper, a new criteria named vulnerability time... 

    Effect of stone-wales defects on electronic properties of armchair graphene nanoribbons

    , Article 2013 21st Iranian Conference on Electrical Engineering, ICEE 2013 ; 2013 , 14-16 May ; 9781467356343 (ISBN) Samadi, M ; Faez, R ; Sharif University of Technology
    2013
    Abstract
    In this paper, the effects of Stone-Wales (SW) defect on transport properties of armchair graphene nanoribbons (AGNRs) are studied using tight binding calculations combined with nonequilibrium Green's function (NEGF). We evaluate transmission and density of states (DOS) in two cases, pristine and defective AGNR, and we compare the results. Our results indicate that in the latter case, a larger bandgap is made due to symmetry breaking in GNR layer  

    A Novel Stability-based EMG-assisted Model of the Lumbar Spine to Estimate Trunk Muscle Forces and Spinal Loads in Various Static Activities

    , M.Sc. Thesis Sharif University of Technology Samadi, Soheil (Author) ; Arjmand, Navid (Supervisor)
    Abstract
    The spine like every other mechanical pillar, is exposed to buckling and loss of stability. While existing biomechanical models emphasize the pressure force on the disk as the main cause of injury, there is also a possibility of local buckling phenomenon in vertebral discs. Because of the prevalence and high cost of lower back pain, it is essential to evaluate the forces carried by disks and lumbar muscles during occupational activities more accurately. In this regard, hybrid EMG-assisted optimization (EMGAO) approaches are most common methods for estimation of spinal loads. These models, not only use EMG data to be physiologically creditable, but also satisfy equilibrium requirements at all... 

    Elimination of Environmental Problems Caused by Leakage of Electrical Transformers Fluid (Askarel) by Biological Methods

    , M.Sc. Thesis Sharif University of Technology Samadi, Aryan (Author) ; Yaghmaei, Soheila (Supervisor)
    Abstract
    Polychlorinated biphenyls are a group of hydrocarbons that are composed of two benzene rings and chlorine admixture on it. Due to their special properties, these materials were added to oils for years to improve their properties. These compounds have many industrial applications in various industries, such as the production of fluorescent lamps, adhesives, dyes, and especially as a cooling and insulating liquid as the Askarel oil in power transformers. Due to the properties of these compounds, which include stability and bioaccumulation in fatty tissues, the wide use of these substances causes environmental contamination and leads to a variety of cancerous diseases. Among the cleaning... 

    A novel stability-based EMG-assisted optimization method for the spine

    , Article Medical Engineering and Physics ; Volume 58 , 2018 , Pages 13-22 ; 13504533 (ISSN) Samadi, S ; Arjmand, N ; Sharif University of Technology
    Elsevier Ltd  2018
    Abstract
    Traditional electromyography-assisted optimization (TEMG) models are commonly employed to compute trunk muscle forces and spinal loads for the design of clinical/treatment and ergonomics/prevention programs. These models calculate muscle forces solely based on moment equilibrium requirements at spinal joints. Due to simplifications/assumptions in the measurement/processing of surface EMG activities and in the presumed muscle EMG-force relationship, these models fail to satisfy stability requirements. Hence, the present study aimed to develop a novel stability-based EMG-assisted optimization (SEMG) method applied to a musculoskeletal spine model in which trunk muscle forces were estimated by... 

    Evaluation of bioactivity and biocompatibility of silk fibroin/TiO2 nanocomposite

    , Article Journal of Medical and Biological Engineering ; Volume 38, Issue 1 , February , 2018 , Pages 99-105 ; 16090985 (ISSN) Johari, N ; Madaah Hosseini, H. R ; Taromi, N ; Arasteh, S ; Kazemnejad, S ; Samadi Kuchaksaraei, A ; Sharif University of Technology
    Springer Berlin Heidelberg  2018
    Abstract
    Biodegradable polymer/bioceramic nanocomposites are osteoconductive and can accelerate healing of bone tissue. In this research, silk fibroin (SF)/titanium dioxide (TiO2) nanocomposites were synthesized using different concentrations of TiO2 nanoparticles (0, 5, 10, 15 and 20 wt%). The SF/TiO2 nanocomposites were studied in terms of bioactivity and biocompatibility. The in vitro assessment of osteoblasts compatibility indicated that SF inclusion rendered nanocomposite biocompatible whereas presence of TiO2 nanoparticles allowed the cells to adhere and grow on nanocomposite surface and enhanced the bioactivity of the composite. © 2017, Taiwanese Society of Biomedical Engineering