Sharif Digital Repository

TiO2 nanorod layers are synthesized by simple chemical oxidation of Ti substrates. Diffuse reflectance spectroscopy measurements show effective light scattering properties originating from nanorods with length scales on the order of one micron. The films are sensitized with CdSe quantum dots (QDs) by successive ionic layer adsorption and reaction (SILAR) and integrated as a photoanode in quantum dot sensitized solar cells (QDSCs). Incorporating nanorods in photoanode structures provided 4- to 8-fold enhancement in light scattering, which leads to a high power conversion efficiency, 3.03% (Voc = 497 mV, Jsc = 11.32 mA/cm2, FF = 0.54), in optimized structures. High efficiency can be obtained... 

In this paper a new cell structure is introduced to reduce the rate of CdTe corrosion in quantum dot sensitized solar cells (QDSSCs) using I -/I- 3 electrolyte. In this cell, one electrode is a titania nanorod that was sensitized with CdTe quantum dots as the working electrode. A thin gold layer is sputtered on the electrode to act as a protective layer against the I-/I- 3 corrosive electrolyte and to passivate the CdTe surface traps which are the main recombination centres in a QDSSC. In addition, a Schottky barrier formed at the interface of Au and CdTe prevents direct electron recombination from the CdTe conduction band with I- 3 ions. The mechanism of charge transfer and quantum dot... 

We report a new design of solar cells based on semiconductor quantum dots (QDs), monolithic quantum dot sensitized solar cells (MQDSCs). MQDSCs offer the prospect of having lower cost and a simpler manufacturing process in comparison to conventional double substrate QDSCs. Our proposed monolithic QDSCs have a triple-layer structure, composed of a CdS sensitized mesoporous TiO2 photoanode, a scattering layer made by a core-shell structure of TiO 2/SiO2, and a carbon active/graphite counter electrode layer, which are all deposited on a single fluorine doped tin oxide (FTO) glass substrate. Mesoporous TiO2 was sensitized with CdS QDs by successive ionic layer adsorption and reaction. Here,... 

Two-dimensional (2D) transition metal dichalcogenides are promising candidates of photodetectors where they are commonly grown parallel to the substrate due to their 2D characteristics in micrometer scales from exfoliation of bulk crystals or through high temperature chemical vapor deposition (CVD) methods. In this study, semi-hexagonal vertical nanosheets of SnS2 layered have been fabricated on FTO substrate without using Sn source through CVD method at relatively low temperature (500 °C). Due to exceptional band alignment of triple cation lead perovskite (TCLP) with semi-hexagonal SnS2 nanosheets, an improved photodetector has been fabricated. This type of photodetectors fabricated through... 

A key direction toward enhancing the long term and outdoor stability of the perovskite solar cells is encapsulation. As a result, a suitable encapsulation package is required to prevent moisture and oxygen penetration toward the perovskite solar cells. In this work, a low-cost commercially available bilayer structure of poly (methyl methacrylate)/ room-temperature vulcanizing silicone rubber (RTV) encapsulation package for enhancing the long term stability of the perovskite solar cells has been investigated. Encapsulated cells retained more than 80% of the initial efficiency at the environmental condition of 50% moisture, and room temperature after 1000 h, however reference cell efficiency... 

TiO 2 nanorods, TiO 2 nanorod/TiO 2 nanoparticle and TiO 2 nanorod/ZnO nanoparticle composite structures were integrated as photoanodes in backside illuminated dye-sensitized solar cells (DSSCs). Incorporation of TiO 2 nanoparticles into the bare nanorods increased the dye loading and improved the short-circuit current density (J sc) from 2.22 mA/cm 2 to 3.57 mA/cm 2. ZnO nanoparticles electrochemically grown into the TiO 2 nanorod layer could increase the surface area. Nevertheless, this considerably reduced the J sc to 0.57 mA/cm 2 and consequently cell efficiency. Electrochemical impedance spectroscopy (EIS) results showed that ZnO incorporated samples have better effective diffusion... 

Among the various approaches, ZnS treatment is the most convenient method for reducing the charge recombination in quantum dot-sensitized solar cells (QDSSCs). Here an improved method of ZnS treatment is explained for efficiency enhancement in QDSSCs. To get to the goal of device performance improvement, it is essential to have a uniform deposited layer. We utilized Triton X-100 (TX-100) as a surfactant to the convenient aqueous precursors during ZnS deposition by successive ionic layer adsorption and reaction method. It helps to decrease in contact angle and increase in wettability of the aqueous precursor and results in a more uniform deposited layer. The effect of modified ZnS treatment... 

In terms of manufacturability, there is a high tendency to deposit light-absorbing CuInS2 films by solution processing methods like ink-based depositions. In particular, for nanoparticle inks, the synthesis of highly dispersed and stable inks, with uniformity in the deposition process, is a serious challenge. Here, we demonstrate a novel two-step low-temperature CuInS2 film deposition method in which the In2S3 is deposited first. It then partially is converted into CuInS2 through the infiltration of Cu+ ions in the In2S3 layer in a dip-coating process. The resulting films are highly uniform, with diffraction peaks indicating the formation of pure CuInS2 phase. The proper stoichiometry of... 

TiO2 hollow fibers with high surface area were manufactured by a simple synthesis method, using natural cellulose fibers as template. The effective light scattering properties of the hollow fibers, originating from their micron size, were observed by diffuse reflectance spectroscopy. In spite of the micrometric length of the TiO2 hollow fibers, the walls were highly porous and high surface area (78.2 m2 g-1) was obtained by the BET method. TiO2 hollow fibers alone and mixed with other TiO2 pastes were sensitized with CdSe quantum dots (QDs) by Successive Ionic Layer Adsorption and Reaction (SILAR) and integrated as a photoanode in quantum dot sensitized solar cells (QDSCs). High power... 

The photoanodes of solid state dye sensitized solar cells (ss-DSCs) embedded with different contents of TiO 2 hollow spheres (HSs) were prepared and the photovoltaic performances were systematically characterized. TiO 2 hollow spheres were synthesized by a facile sacrificial templating method, grounded and added in different ratios to TiO 2 nanoparticle (NP) paste, from which composite HS/NP electrodes were fabricated. The composite photoanodes include hollow spheres of 300-700 nm with enhanced light scattering characteristics in visible range which leads to improved light absorption in conventional thin film electrodes of ss-DSC. By optimizing the amount of HSs in the paste, 40% improvement... 

The sequential deposition method is introduced for suppressing the leakage current in silicone rubber insulators. Room temperature vulcanizing silicone and TiO2/silica nanocomposites are sequentially deposited on silicone insulators surface. TEM results showed that TiO2 nanoparticles size is about 20–30 nm, and the structural study revealed their anatase crystalline structure. Silica nanoparticles are deposited on the surface of insulators by spray deposition. The contact angle was enhanced from 104° to 149° after nanoparticles deposition, which confirms the hydrophobicity improvement. Results show that leakage current for nanocomposite samples in a contaminated environment reduced to about... 

Antisolvent crystallization is known as an effective approach for the deposition of pinhole-free solution-processed perovskite layers for high-performance solar cells. Here, we introduce a modified antisolvent dripping method by adding tetra ethyl orthosilicate (TEOS) into chlorobenzene as a conventional antisolvent. Through TEOS modification, perovskite solar cells show efficiencies as high as 16% with more than 85% retention after 290 h storage at ambient conditions in comparison to 20% in pristine cells. This significant enhancement in efficiency and stability mainly related to the decrement of the density of surface defects, which is confirmed by considerably enhanced photoluminescence... 

Surface treatments of TiO2 nanostructure in semiconductor quantum dot sensitized solar cells (QDSCs) aimed to increase the photovoltaic conversion efficiencies of the solar cells are analyzed. A fluorine treatment, with NH4F or HF, on the TiO2 electrodes leads to a general increase of QDSCs performance in a range of QDSCs using different light absorbing materials: CdS, CdSe, and PbS/CdS. In contrast, no significant effect on QDSC performance has been observed after a TiCl4 treatment conventionally used for high performance dye sensitized solar cells (DSCs). Surface and photoelectrochemical characterization of treated electrodes and full solar cells was carried out by means of X-ray... 

Carbazole compounds are p-type hole-transporting materials (HTMs) useful for perovskite solar cells (PSCs). In this work, we developed a new class of carbazol based HTMs; non-fused 3-D asymmetric structures (S14 and S12) as HTM of PSCs. To the best of our knowledge, there is no report on non-fused HTMs with a high glass transition temperature (Tg = 165 °C), which reduces crystallization and suppresses grain boundaries in glassy film, resulting in long-term durability. Experimental results show that tuning the carbazole moiety in S14 structure has a constructive influence on geometrical alignment, hole mobility, hydrophobicity, stability as well as efficiency. The resultant power conversion... 

Autocorrelation receiver (AcR) is usually used as the general receiver for transmitted reference (TR) communication systems on a quite intuitive basis. In this paper, we apply the principle of statistical invariance to obtain the optimum TR receiver on a decision-theoretic basis, and it is shown that the autocorrelation receiver is optimal only in a special case. Performance of the optimum receiver and the suboptimum AcR for some important modulation schemes is also evaluated. The results imply that allocating a part of the transmitted energy and bandwidth to reference pulses would not help improve the performance of the system and the optimal performance might be achieved via much simpler...