Sharif Digital Repository

In this work we introduce new model for energy-delay product and the performance of 80-nm SOI-CMOS circuits for the range of Vdd=0.1-1.5V and Vth=0-0.8V, are analyzed to find optimal Vdd and Vth BSIMSOI3.3 model (level 57) is used to verify the answers. We show that Energy-Delay Product (EDP) isn't appropriate metric for gate sizing problem. And a new design metric is introduced as a generalization of EDP. This metric is used to determine the transistor sizing for complex circuits based on the specified delay and energy constrains. In this case, unlike the conventional energy delay product metric, delay and energy can be considered with different emphasis. The complete design flowcharts and... 

This paper presents a new method to counter Anti Radiation Missile (ARM) threats, which is effective against advanced ARM. By using random phase and amplitude active decoys in the specified optimum positions and network implementation we show that ARM threats will be removed profoundly. Also, iterative methods are presented to cancel the internal interference effects in the proposed structure  

in this paper detection and the accuracy of measurement of range, velocity and DOA in PCL radar for optimized parameters is considered. It is shown that, in order to measure the bistatic characteristics of a target, we can process the monostatic ambiguity function and extract the bistatic factors by proposed Algorithm. ©2006 IEEE  

Solid-phase microextraction (SPME) is a fast, solvent-free technique, which, since its introduction in the 1990s, has been increasingly applied to sample preparation in analytical chemistry. Conventional SPME fibers are fabricated by making a physical bond between the usual silica substrate and the polymeric coatings. However, some applications are limited, as the lifetime and the stability of conventional SPME fibers cannot meet the demands of analyzing relatively non-volatile compounds with more polar moieties. There have been attempts to analyze less volatile compounds by increasing the thermal, physical and chemical stability of the fibers. In this review, we present some new... 

Research projects in urban transportation systems require proper simulation softwares. Such softwares are the basic requirements of any kind of study in electrical transportation systems. Due to high energy consumption of these systems, studies for its optimization are challenging and necessary. In this paper an optimized timetable of trains? movement is proposed in order to completely utilize the regenerative energy of trains? braking in stations. A sample subway system is simulated and Genetic algorithm is used as an optimization method. The effect of headway and reserve times on the amount of energy consumption is studied and an optimized reserve time set is found for the sample system.... 

In this study, organic aerogels were synthesized by the sol-gel polycondensation of mixed cresol with formaldehyde in a slightly basic aqueous solution. Carbon aerogels and xerogels are generated by pyrolysis of organic aerogels. The novel sol-gel-based micro-solid-phase extraction sorbent, resorcinol-formaldehyde xerogel, was employed for preconcentration of some selected herbicides. Three herbicides of the aryloxyphenoxypropionate group, clodinafop-propargyl, haloxyfop-etotyl, and fenoxaprop-P-ethyl, were extracted from aqueous samples by micro-solid-phase extraction and subsequently determined by gas chromatography with mass spectrometry. The effect of different parameters influencing the... 

Adapting natural phenomena rendering for realtime applications has become a common practice in computer graphics.We propose a GPU-based multi-band method for optimized synthesis of "far from coast" ocean waves using an empirical Fourier domain model. Instead of performing two independent syntheses for low- and high-band frequencies of ocean waves, we perform only low-band synthesis and employ results to reproduce high frequency details of ocean surface by an optimized iterative up-sampling stage. Our experimental results show that this approach greatly improves the performance of original multi-band synthesis while maintaining image quality. © Springer-Verlag 2009  

A novel molecularly imprinted xerogel (MIX) based on organically modified silica (ORMOSIL) was successfully prepared for on-line capillary microextraction (CME) coupled with high-performance liquid chromatography (HPLC). The sol-gel-based xerogel was prepared using only one precursor and exhibited extensive selectivity towards triazines along with significant thermal and chemical stability. Atrazine was selected as a model template molecule and 3-(trimethoxysilyl)propylmethacrylate (TMSPMA) as a precursor in which the propylmethacrylate moiety was responsible for van der Waals, dipole-dipole, and hydrogen-bond interactions with the template. This moiety plays a key role in creation of... 

This review is mostly focused on the recently emerged methodologies for preparing the appropriate extracting media with enhanced capacity, stability and selectivity, which could be used in capillary microextraction (CME). We particularly consider conductive polymers, sol-gel-based materials, monolithic coatings, molecularly-imprinted polymers and xerogels. Moreover, we discuss recent advances in configuration of CME, array capillaries and unbreakable substrates  

An attempt was made to combine μ-solid phase extraction and headspace single drop microextraction techniques and use their advantages for trace determination of some volatile organic compounds in aqueous samples. After performing the two-step preconcentration approach, the desired analytes were determined by gas chromatography-mass spectrometry. A resorcinol-formaldehyde-based xerogel was used as the extraction medium in the μ-solid phase extraction (μ-SPE) method. Then, the extracted BTEX was eluted with a rather large amount of methanol. To remove the laborious process including solvent evaporation and further reconstitution, which is usually accompanied by loss of analytes and accuracy,... 

In this research, the microstructure, dielectric, and non-Ohmic properties of (Cr, Nb) co-doped SnO2 ceramics, (Cr0.5, Nb0.5)xSn1-xO2 with x% = 0, 0.5, 1.0, 2.0, 5.0, and 10.0, as a colossal dielectric material and a prospective alternative to co-doped TiO2 ceramics were studied. The X-ray diffraction results indicated that in all compositions, the cassiterite phase was achieved without any secondary phases. Moreover, field-emission secondary electron microscopy showed that the microstructure of samples has different morphologies including typical grains, enlarged grains and prism-like grains microstructure for various sintered samples. The maximum dielectric constant (2737) accompanied by... 

In recent years, analyzing genome-wide expression profiles to find genetic markers has received much attention as a challenging field of research aiming at unveiling biological mechanisms behind complex disorders. The identification of reliable and reproducible markers has lately been achieved by integrating genome-scale functional relationships and transcriptome datasets, and a number of algorithms have been developed to support this strategy. In this paper, we present a promising and easily applicable tool to accomplish this goal, namely CytoGTA, which is a Cytoscape plug-in that relies on an optimistic game theoretic approach (GTA) for identifying subnetwork markers. Given transcriptomic... 

Overlay networks have been an active area of research for the past few years. The control overhead and the recovery from failure are the two important issues in the topology aware embedded overlay networks. In this research, we have introduced an enhanced version of the NICE protocol, called resilient NICE (R-NICE) that reduces the control overhead significantly. Furthermore, by saving the join path for an end host, the time and overhead of rejoining for isolated nodes have also been reduced. This will cause the clusters and consequently the overall network to become more stable and the effect of a node failure become localized. Our experimental results have confirmed the superior... 

A novel rotary magnetohydrodynamic (MHD) (RMHD) micropump is presented in this paper in order to both benefit exclusive advantages from the MHD micropumps and eliminate the current obstacles in their implementation. Lorentz force, which is the actuation mechanism in RMHD, is used to propel a mercury slug in a circular microchannel in order to suck the working fluid from the inlet and pump it to the outlet. This idea is integrated with a valve which prevents the working fluid from passing through, while allowing the mercury slug to pass, during each pumping loop. The performance of a fabricated RMHD is evaluated, considering parameters such as pressure difference, running duration, electric... 

The raising trend both in violent and property crime are of major concern in Iran. Using a panel data modeling (province wide), the paper provides an econometrics assessment of the relationship between crime against properties and violent crimes as functions of deterrent, social, economic and demographic factors in Iran, in the framework of Becker-Ehrlich crime supply theory. The findings indicate that, although deterrence hypothesis is not confirmed for burglary and assault, it explains the variations of murders and threats. Economic factors play key role in burglary and threat explanation, but they do not affect willful murders, however, Literacy explains both murders and threats. Average... 

A simple and sensitive spectrophotometric method is proposed for the simultaneous determination of protocatechuic acid and protocatechuic aldehyde. The method is based on the difference in the kinetic rates of the reactions of analytes with [Ag(NH3)2]+ in the presence of polyvinylpyrrolidone to produce silver nanoparticles. The data obtained were processed by chemometric methods using principal component analysis artificial neural network and partial least squares. Excellent linearity was obtained in the concentration ranges of 1.23-58.56 ?g mL-1 and 0.08-30.39 ?g mL-1 for PAC and PAH, respectively. The limits of detection for PAC and PAH were 0.039 and 0.025 ?g mL-1, respectively  

Purpose: The aim of this study was to compare diffusion tensor imaging (DTI) isotropic map (p-map) with current radiographically (T 2/T 2 -FLAIR) methods based on abnormal hyper-signal size and location of glioblastoma tumor using a semi-automatic approach. Materials and methods: Twenty-five patients with biopsy-proved diagnosis of glioblastoma participated in this study. T 2, T 2 -FLAIR images and diffusion tensor imaging (DTI) were acquired 1 week before radiotherapy. Hyper-signal regions on T 2, T 2 -FLAIR and DTI p-map were segmented by means of semi-automated segmentation. Manual segmentation was used as ground truth. Dice Scores (DS) were calculated for validation of semiautomatic... 

The results of three cases of two consecutive reactors are studied in two types of co-current and counter-current flow in second reactor where two consecutive reactors are oxidative coupling of methane (OCM) and Fischer-Tropsch (FT) reactors. FT reactor can be fixed bed or membrane fixed bed reactor with a hydrogen perm-selective membrane. Effect of CH4/O2 ratio, contact time, inlet temperature, and amount of N2 in OCM feed on C2 to C5+ hydrocarbons produced in FT reactor were studied. Results show that use of counter-current hydrogen-perm selective membrane FT reactor that sequenced after OCM reactor improves the C5+ yield as a desirable product and reduces the amount of CH4 and CO2 as... 

The novel coumarin-3-carboxamides (=2-oxo-2H-1-benzopyran-3-carboxamides) 5a-5g containing lipophilic spacers were synthesized through the Ugi-four-component reaction (Scheme 1). The reactions of aromatic aldehydes 1, 4,4'-oxybis[benzenamine] or 4,4'-methylenebis[benzenamine] as diamine 2, coumarin-3-carboxylic acid (=2-oxo-2H-benzopyran-3-carboxylic acid; 3), and alkyl isocyanides 4 lead to the desired substituted coumarin-3-carboxamides 5a-5g at room temperature with high bond-forming efficiency. These novel coumarin derivatives exhibit brilliant fluorescence at 544 nm in CHCl 3