Sharif Digital Repository

In this paper, synthesis and swelling behavior of a novel superabsorbent hydrogel based on kappa carrageenan (κC) and polyacrylonitrile (PAN) was investigated. To achieve partially hydrolyzed κC-PAN hydrogel, physical mixture of κC and PAN was hydrolyzed by NaOH solution. During alkaline hydrolysis, the nitrile groups of PAN are converted to a mixture of hydrophilic carboxamide and carboxylate groups follow by in situ crosslinking of the grafted PAN chains. The reaction variables affecting on the swelling capacity of the hydrogel were systematically optimized to achieve a hydrogel with swelling capacity as high as possible. Under the optimized conditions concluded, super swelling hydrogel... 

Impurities such as hydrogen sulfide, water vapor and heavy hydrocarbons in natural gas have considerable effects on the membrane performance. The influence of ethane on the performance of polyphenylene oxide and cardo-type polyimide hollow fiber membranes in CO2/CH4 Separation was studied. The gas mixture permeation rate was increased in the presence of C2H6. However, the CO2/CH4 separation factors remained almost the same in the presence and absence of the C2H6. This is an abstract of a paper presented at the 8th World Congress of Chemical Engineering (Montreal, Quebec, Canada 8/23-27/2009)  

3D bioprinting is a potential technique for developing functional 3D tissues for tissue engineering and regenerative medicine applications. Recently, the direct formation of 3D tissues on defect sites, known as in situ 3D bioprinting, has gained increasing attention to fulfill unmet needs. In situ 3D bioprinting has shown the capability of addressing problems, such as the need for invasive operations for transplantation and fabrication of sophisticated, irregularly shaped constructs, demonstrating its advantages over conventional methods. This review summarizes the two main approaches used for in situ bioprinting, namely robotic and handheld bioprinting. Besides, the latest advances in organ... 

Natural gas contains several impurities, e.g., CO 2 and H 2S, which have undesirable effects on the performance of the glassy polymeric membranes. The plasticization effect of H 2S at high concentrations on the gas separation performance of polyphenylene oxide hollow fiber membrane has been studied at different compositions of H 2S and feed pressures. The existence of high concentrations of H 2S in CH 4 feed mixture, which is present in many natural gas sources in Iran, enhances plasticization. For a H 2S/CH 4 mixture containing 5008 ppm H 2S at ≈ 75 psig, the H 2S permeance reduces by > 45% from its initial value. H 2S acts as a plasticizer in H 2S/CH 4 membrane separation at elevated... 

Nanofiber membranes were fabricated by electrospinning poly(vinylidene fluoride). The electrospun nanofiber membranes were further modified by grafting of acrylic acid (AA) and methacrylic acid (MAA) over the surfaces of the membranes. Plasma AA graft was attempted only, and the results indicated the partial membrane pore filling with grafted AA. For MAA grafting, chemically induced polymerization using benzoyl peroxide and hydrogen peroxide was attempted. The combination of plasma and chemically induced MAA graft polymerization was also attempted. The membranes were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and static contact angle (SCA)... 

Integrally skinned asymmetric membranes for the separation of O 2 and N 2 were fabricated by the phase inversion technique from polysulfone, polyetherimide, and polyimide. Two types of surface modifying macromolecules (SMMs) including hydrophilic SMM (LSMM) and charged SMM (cSMM) were synthesized and blended with the casting solution to modify the membrane surface. The cast film was then immersed in the first coagulant alcohol (methanol, ethanol, or isopropanol) for a predetermined period, before being immersed in the second coagulant (water). The SMMs used in these experiments were laboratory synthesized by the two-step process of polyurethane prepolymer synthesis and end capping, before... 

In this article an attempt was made to fabricate defect-free asymmetric polysulfone (PSf) membranes for the separation of oxygen and nitrogen. The approach is based on the enhanced delayed demixing by blending surface modifying macromolecules (SMMs) in the casting solution and by immersing the cast film in isopropanol for a certain period before it is immersed in water. Different SMMs, including hydrophobic and charged SMMs, were synthesized, characterized, and blended to the host PSf. It was found that the charged SMM could indeed contribute to the removal of defective pores from the skin layer and enhancement of oxygen/nitrogen selectivity. The experimental results were further interpreted... 

Kidney toxicity represents the most common adverse event resulting from drugs, and its assessment is critical for drug development. The application of two-dimensional (2D) in vitro and animal models to evaluate drug efficacy have their shortcomings due to the lack of representation of in vivo environment for the first, or the difference in drug pharmacokinetics and pharmacodynamics response between animals and human for the latter. In this regard, three-dimensional (3D) microfluidic culture platforms such as kidney-on-chip have shown great promise in recapitulating native tissues in vitro. In recent years, significant attempts have also been made in the modeling of kidney diseases to study... 

Four 5-, 10-, 20- and 30-story moment frames, representing low-, mid-, and two high-rise structures, were subjected to a great number of idealized directivity pulses. The amplitudes and periods of pulses vary from 0.02 g to 1.0 g and 0.5 to 12 sec, respectively. Over 1400 nonlinear dynamic analyses of low- to high-rise moment frames were performed which were feasible through using modified fish-bone model. The distribution of interstory drift along the height was studied and two applied contours were proposed: (i) the maximum interstory drift contour, and (ii) the critical story contour. These contours were demonstrated versus the ratio of natural period of the structure to the pulse period... 

In this article singular points of a parallel manipulator are obtained based on a novel geometrical method. Here we introduce the constrained plain method (CPM) and some of its application in parallel mechanism. Given the definition of constraint plane (CP) and infinite constraint plane (ICP) the dependency conditions of constraints is achieved with the use of a new theorem based on the Ceva geometrical theorem. The direction of angular velocity of a body is achieved by having three ICPs with the use of another theorem. Finally, with the use of the above two novel theorems singularities of the 3UPF_PU mechanism are obtained. It should be emphasized that this method is completely geometrical,... 

An analytical model is proposed to study the effect of particle size on melting enthalpy and entropy of metallic nanoparticles (NPs). The Mott's and Regel's equations for melting entropy in the combination of core average coordination number (CAC) and surface average coordination number (SAC) of freestanding NPs are considered. Clusters of icosahedral (IC), body centered cubic (BCC), and body centered tetragonal (BCT) structure without any vacancies and defects are modeled. Using the variable coordination number made this model to be in good agreement with experimental and molecular dynamic (MD) results of different crystal structures. The model predicts melting entropy and enthalpy of... 

Grinding is widely used for manufacturing of components that require fine surface finish and good dimensional accuracy. In this study a thermo-mechanical finite element analysis is conducted to find out how grinding parameters can affect temperature and residual stress distribution in the workpiece. Results of parametric study presented in this work indicate, by carefully selecting the grinding parameters, minimum thermal and mechanical damage can be achieved. Higher workpiece velocities produce higher surface residual stress. By increasing depths of cut, depth of tensile residual stresses increases. Convection heat coefficient does not have any considerable effect on surface residual stress... 

Adaptive Noise Cancellation (ANC) is a well-known technique for background noise reduction in automobile and vehicular environments. The noise fields in automobile and other vehicle interior obey the diffuse noise field model closely. On the other hand, the ANC does not provide sufficient noise reduction in the diffuse noise fields. In this paper, a new multistage post-filter is designed for ANC as a solution to diffuse noise conditions. The designed post-filter is a single channel Linear Prediction (LP) based speech enhancement system. The LP is performed by an adaptive lattice filter and attempts to extract speech components by using intermediate ANC signals. The post-filter has no... 

Shot peening is widely used to improve the fretting fatigue strength of critical surfaces. Fretting fatigue occurs in contacting parts that are subjected to fluctuating loads and sliding movements at the same time. This paper presents a sequential finite element simulation to investigate the shot peening effects on normal stress, shear stress, bulk stress and slip amplitude, which are considered to be the controlling parameters of fretting damage. The results demonstrated that among the modifications related to shot peening, compressive residual stress has a dominant effect on the fretting parameters  

One-dimensional (1D) MgO structures were successfully synthesized via carbothermic reduction of mechanically activated mixture of MgO and graphite. Mechanical activation of source materials before carbothermic reduction can substantially enhance the formation of MgO products at a temperature (1000 °C) relatively lower than that required in previous approaches (≥1200 °C). However, the morphology of MgO formed is dependent on the degree of mechanical activation and the condition of the subsequent carbothermic reduction. Two distinctive morphologies were found for MgO products synthesized using our method: single crystalline nanorods with rectangular cross-sections whose diameters range from 50... 

Attitude and vibration control of a general form of flexible satellites is addressed in this paper. Partial differential dynamic equations are derived considering new details such as multi sectioned solar panels and elastic connections between main hub and solar panels. Boundary control approach is adopted to eliminate simplification errors of discrete models, using just one actuator in the hub. Asymptotic stability of attitude dynamics is proved for a group of boundary controllers and necessary conditions for asymptotic stability of vibrations are discussed. Being independent of modeling accuracy and using easily measurable feedbacks are among advantages of the proposed class of... 

Characterization and calcination behavior of a low-grade manganese ore, as a part of Mn ferroalloys production, was studied by XRF, ex-situ XRD, in-situ XRD, and SEM-EDS techniques. Calcination experiments were carried out at and up to 900 °C (1173 K) in air and argon atmospheres. The samples were in particles and powder forms. The results indicated that both quartz and calcite phases in the ore exhibit a bimodal spatial distribution; as relatively large regions and finely distributed in the Mn- and Fe-containing phases. By Rietveld analysis of the in-situ XRD data, the reactions occurring upon heating during the calcination process were deduced. Thermal decomposition and reactive diffusion... 

Estimating the position of a mobile set is of great importance in new mobile services. However, in most cases, the accuracy should be less than 100 meters. This accuracy is hard to reach especially in urban areas. The main problem is that there are a lot of obstacles like buildings between the BTS and the mobile set. Thus the time measured between BTS and the mobile set is somehow greater than the time it takes the wave to travel directly between two points. This paper introduces an optimized solution for TDOA as one of the most efficient ways for finding the location of a mobile phone. Considering the standards and limitations of both GSM and UMTS, the Authors present a solution for... 

Weighting elements to achieve radiation patterns with desired characteristics is a classical work in phased array antennas. These characteristics can be low sidelobe level, narrow beamwidth, high directivity, pattern nulling in special angle and etc. For each of these characteristics, different methods have been introduced. Most of methods have been presented for uniform arrays, however there are lots of methods to obtain a desired pattern for antennas with non-uniform element distances. The problem with these methods is complexity or not very good results. In this paper, fast and easy methods based on Least Square Error that leads to good results are presented. In addition, weighting of... 

The elastic behavior of an edge dislocation, which is positioned outside of a nanoscale elliptical inhomogeneity, is studied within the interface elasticity approach incorporating the elastic moduli and surface tension of the interface. The complex potential function method is used. The dislocation stress field and the image force acting on the dislocation are found and analyzed in detail. The difference between the solutions obtained within the classical-elasticity and interface-elasticity approaches is discussed. It is shown that for the stress field, this difference can be significant in those points of the inhomogeneity-matrix interface, where the radius of curvature is smaller and which...