Loading...
Search for:
seraj--yasaman
0.075 seconds
Performance evaluation of hybrid transfer switches in grounded and ungrounded medium-voltage electrical systems
, Article CIGRE/IEEE PES International Symposium Quality and Security of Electric Power Delivery Systems, CIGRE/PES 2003, 8 October 2003 through 10 October 2003 ; 2003 , Pages 91-96 ; 2858730156 (ISBN); 9782858730155 (ISBN) ; Mokhtari, H ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2003
Abstract
Application of a fast hybrid transfer switch (HTS) as a suitable tool for protection of sensitive electrical loads against power quality problems has attracted much attentions these days. In this paper, methods for desired control of a HTS which consists of a fast fault-detection method and a suitable firing and transfer strategy are proposed. Simulation results of a HTS under various operating conditions for two types of medium-voltage electrical systems, i.e. grounded (star connection) and ungrounded (delta connection) systems, with respect to total transfer time are presented. The results show the capability of the HTS and the proposed control methods in fast transferring of sensitive...
Cosmic Neutrinos at Neutrino Telescopes CP-violation, Source Properties and Beyond the Standard Model Physics
, Ph.D. Dissertation Sharif University of Technology ; Farzan, Yasaman (Supervisor)
Abstract
In this thesis, we studied the oscillation of neutrino flavors and the measurement of mixing parameters through the detection of cosmic neutrinos at neutrino telescopes. Most of the astrophysical explosions predict the emission of neutrino flux and kilometer-scale detectors are under construction for the observation of these neutrinos. Detection of astrophysical neutrinos opens a new window to understand the neutrino properties and also the properties of astrophysical sources.In this thesis first we review the phenomenology of neutrino flavor oscillation and characteristics of neutrino mass matrix. By introducing a new class of invariants (under general transformation of lepton fields bases)...
Dynamics of Two Coupled Neurons of Different Types of Excitability
, Ph.D. Dissertation Sharif University of Technology ; Razvan, Mohammad Reza (Supervisor)
Abstract
Excitability is one of the most important characteristics of a neuron. In 1948, Hodgkin identified three different types of excitability of neurons. Excitability an all of its types can be observed in Hodgkin-Huxley model of neuronal dynamics (H-H model) as a four-dimensional system of differential equations and in at least two dimensional reductions of H-H type models. By applying the theory of dynamical systems (e.g. bifurcation theory), one can give a mathematical definition of excitability.Excitability of the neuron is equivalent to that the neuronal model is near a bifurcation through which the state of the system approaches to a stable limit cycle. In this thesis, a two-dimensional...
Static strain aging behavior of a manganese-silicon steel after single and multi-stage straining
, Article Journal of Materials Engineering and Performance ; Volume 25, Issue 3 , 2016 , Pages 1047-1055 ; 10599495 (ISSN) ; Serajzadeh, S ; Sharif University of Technology
Springer New York LLC
2016
Abstract
In this work, static strain aging behavior of an alloy steel containing high amounts of silicon and manganese was examined while the influences of initial microstructure and pre-strain on the aging kinetics were evaluated as well. The rate of strain aging in a low carbon steel was also determined and compared with that occurred in the alloy steel. The rates of static strain aging in the steels were defined at room temperature and at 95 °C by means of double-hit tensile testing and hardness measurements. In addition, three-stage aging experiments at 80 °C were carried out to estimate aging behavior under multi-pass deformation processing. The results showed that in-solution manganese and...
A New Approach in Value-at-Risk (VaR) Estimation by Forecast Combination Methods
, M.Sc. Thesis Sharif University of Technology ; Barakchian, Mahdi (Supervisor)
Abstract
Value-at-Risk (VaR) is the most commontool for risk management. This tool is used to measure market risk and also used as a basis in determining financial standards for international financial institutions. VaR is the maximum loss of the asset portfolio at the specified confidence level and certain time horizon. Many parametric, nonparametric and semi parametric methods have been invented for VaR estimation. Each one of these methods has its advantages and disadvantages and different methods may perform better in differnet situations.When estimating VaR, we can choose one of these methods or we can combine the VaRs estimated by different methods. There are few researches conducted on VaR...
Improvement of Existing Expand-based Approaches for Construction of Lexical Ontologies with Bi-lingual Dictionaries
, M.Sc. Thesis Sharif University of Technology ; Abolhassani, Hassan (Supervisor)
Abstract
Nowadays the importance of ontologies in various domains such as semantic web and NLP is obvious. Manually construction of ontologies is a time-consuming, costly and error prone. The non-manual building of ontologies approaches are divided to the expand approach and the merge approach, each has pros and cons. The expand approach is preferred upon the merge approach for languages with few lingual resources. The most important thing in the expand approach, which is building an ontology from another existing ontology, is making distinction between the different meanings of polysemous words. This activity is called word sense disambiguation(WSD). The existing approaches usually give attention to...
Cost Engineering: Objectives, Dimensions and to Study Cost Engineering Methods and Models with an Approach to a Proper Model in Manufacturing Activities-case Study: Mapna Locomotive Engineering and Manufacturing Company
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
In the process of industrial and economic development and in the competitive environment in the world, reducing the cost of industrial products is an important factor for more customers' satisfaction, more revenue acquisition, and stability and success in the business. Cost engineering is the area of engineering practice concerned with the application of scientific principles and techniques to problems of cost estimating, cost control, business planning, management science, profitability analysis, project management, planning and scheduling. In this research through the studying the structures and models of cost engineering, in addition to consider this dimensions of cost engineering, the...
Softening Kinetics Prediction of Cold Worked Aluminum Alloy
, M.Sc. Thesis Sharif University of Technology ; Serajzadeh, Siamak (Supervisor)
Abstract
In this work, annealing procedure of cold-deformed AA5052-SiC composite has been simulated by using cellular automata approach and the effect of SiC second phase on softening kinetics has been studied. To do so, site saturated nucleation has been employed to establish initial microstructure. In addition, topological changing due to deformation has been implemented on the microstructure. During annealing, recovery and recrystallization phenomena occur simultaneously, and it has strong effect on the annealed microstructure. Therefore, during annealing, recrystallization and recovery has been considered simultaneously and decreasing in the stored energy, which has developed during deformation...
Global analysis of a delay SVEIR epidemiological model
, Article Iranian Journal of Science and Technology, Transaction A: Science ; Volume 37, Issue A4 , 2013 , Pages 483-489 ; 10286276 (ISSN) ; Razvan, M. R ; Yasaman, S ; Sharif University of Technology
2013
Abstract
This paper is concerned with global analysis of a delay SVEIR epidemiological model in a population of varying size. By using Lyapunov stability method and LaSalle's invariance principle for delay systems, we prove that when there is no endemic equilibrium, the disease free equilibrium is globally asymptotically stable, otherwise the endemic equilibrium is globally stable
Particles in the early Universe: Interface of Cosmology and Particles Massive Neutrinos and Cosmology
, M.Sc. Thesis Sharif University of Technology ; Golshani, Mehdi (Supervisor) ; Farzan, Yasaman (Supervisor)
Abstract
Neutrino flavor oscillations are clear evidence of massive neutrinos. It has been for more than a decade that neutrino physics became one of active topics in the field of particle physics and various experiments started studying the flavor oscillation of neutrinos. Unfortunately, experiments studying the flavor oscillations are only sensitive to the mass square difference, and they are incapable of providing more information about the absolute mass scale of neutrinos. Additionally, sterile neutrinos having non-standard interactions are under vast investigations and studies. Determination of neutrino masses and their effective number is among the most challenging problems by which...
Finite element heat transfer analysis in selective laser melting of AlSi10Mg alloy using bi-directional scan strategy: enhanced thermal conductivity considerations
, Article Journal of Materials Research and Technology ; Volume 27 , 2023 , Pages 6008-6020 ; 22387854 (ISSN) ; Akbarzadeh, A ; Mohammadi, M ; Sharif University of Technology
Elsevier Editora Ltda
2023
Abstract
In the present work, a 3D finite element model was created using the commercial ABAQUS software to analyze the selective laser melting process of AlSi10Mg powder in a bidirectional multi-track, multi-layer configuration. The focus of this investigation was to examine distribution of temperature, melt pool geometry, thermal history, and the temperature change rate. To improve the accuracy of the results, the enhanced thermal conductivity was utilized to incorporate the Marangoni convection effect. The results revealed that, in the initial track, the maximum temperature and dimensions of the melt pool increased, ultimately reaching a plateau as the deposited path extended. However, using a...
Optimal Waveform Design for MIMO-SAR Applications
, M.Sc. Thesis Sharif University of Technology ; Bastani, Mohammad Hassan (Supervisor)
Abstract
Studies regarding Multiple Input - Multiple Output synthetic aperture radars, shows promising advances in synthetic aperture imaging. Compared to conventional SAR, MIMO-SAR encompasses desirable features, namely: lower background noise, better detection rate, easier implementation of imaging modes etc. Signals used in these radars, are required to have specific properties such as orthogonality, large time-bandwidth product, high Doppler tolerance and qualified ambiguity function. Also because of the specific geometry of SAR imaging, these signals should remain orthogonal in respectively large Doppler shifts and time offsets. Through the past years, many signals are suggested in the...
rajectory Optimization of the Internally Carried Air Launch
, M.Sc. Thesis Sharif University of Technology ; Asadian, Nima (Supervisor) ; Fathi, Mohsen (Supervisor)
Abstract
One of the most interesting and at the same time the newest methods to launch a satellite into space is Air Launch or Launch throw the mother aircraft. The placement of the satellite into space by a rocket in specific altitude and speed is separated from the mother aircraft, takes place. The most problems in multi stage rocket launching is trajectory optimization to reaching the maximum height. The survey was conducted using classical optimization methods, which is derived the equations for the gradient based on the calculus of variations. that can be used or modified for emissions control wings and changing the direction of thrust exhaust. It should be noted that in the model of rigid body...
Synthesis and crystal structure of non-symmetric tetradentate complexes of Ni(II), Cu(II), Co(II), and Zn(II)
, Article Synthesis and Reactivity in Inorganic, Metal-Organic and Nano-Metal Chemistry ; Volume 40, Issue 6 , Jul , 2010 , Pages 373-377 ; 15533174 (ISSN) ; Boghaei, D. M ; Shivapour, Z ; Seraj, S ; Sharif University of Technology
2010
Abstract
The non-symmetrical tetradentate Schiff-base H2L have been obtained using the half-unit N-(1-hydroxy-2-acetonaphthone)-1-amino-2- phenyleneimine (HL1) with 2-hydroxyl-1-naphthaldehyde. ML complexes(M = Ni(1), Cu(2), Co(3) and Zn(4)) were prepared and characterized by atomic absorption, IR, UV, 1H NMR spectroscopy, and a single crystal X-ray structure. Crystal data for (1) are triclinic space group P-1, a = 7.9784 (3) A, b = 10.2417 (4) A, c = 13.4090 (5) A, α = 103.8480 (10)°, β = 97.0540 (10)°, γ = 92.2400 (10)° and z = 2. Crystal data for (2): Triclinic space group P-1, a = 7.9991 (6) A, b = 10.0520 (7) A, c = 13.6974 (10) A, α = 103.6500 (10)°, β = 95.9650 (10)°, γ = 90.3160 (10)° and z =...
Extremal rotating black holes in the near-horizon limit: Phase space and symmetry algebra
, Article Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics ; Volume 749 , October , 2015 , Pages 443-447 ; 03702693 (ISSN) ; Hajian, K ; Seraj, A ; Sheikh Jabbari, M. M ; Sharif University of Technology
Elsevier
2015
Abstract
We construct the NHEG phase space, the classical phase space of Near-Horizon Extremal Geometries with fixed angular momenta and entropy, and with the largest symmetry algebra. We focus on vacuum solutions to d dimensional Einstein gravity. Each element in the phase space is a geometry with SL(2,R)×U(1)d-3 isometries which has vanishing SL(2,R) and constant U(1) charges. We construct an on-shell vanishing symplectic structure, which leads to an infinite set of symplectic symmetries. In four spacetime dimensions, the phase space is unique and the symmetry algebra consists of the familiar Virasoro algebra, while in d> 4 dimensions the symmetry algebra, the NHEG algebra, contains infinitely many...
Wiggling throat of extremal black holes
, Article Journal of High Energy Physics ; Volume 2015, Issue 10 , October , 2015 ; 11266708 (ISSN) ; Hajian, K ; Seraj, A ; Sheikh Jabbari, M. M ; Sharif University of Technology
Springer Verlag
2015
Abstract
Abstract: We construct the classical phase space of geometries in the near-horizon region of vacuum extremal black holes as announced in [arXiv:1503.07861]. Motivated by the uniqueness theorems for such solutions and for perturbations around them, we build a family of metrics depending upon a single periodic function defined on the torus spanned by the U(1) isometry directions. We show that this set of metrics is equipped with a consistent symplectic structure and hence defines a phase space. The phase space forms a representation of an infinite dimensional algebra of so-called symplectic symmetries. The symmetry algebra is an extension of the Virasoro algebra whose central extension is the...
Effect of landmark configuration on target registration error for vertebra: A phantom study
, Article Proceedings of SPIE - The International Society for Optical Engineering ; Volume 8671 , 2013 ; 0277786X (ISSN) ; 9780819494450 (ISBN) ; Ahmadian, A ; Seraj, N. D ; Saberi, H ; Khoiy, K. A ; Sharif University of Technology
2013
Abstract
The configuration of landmarks is an important issue in minimizing the target registration error (TRE). In this paper the effect of different landmark configurations on the accuracy of pedicle screw placement during image guided spine surgery (IGSS) is investigated. Since the spine is deformed in intra-operative conditions compared to the preoperative situation, an accurate alignment of each vertebra is crucial to compensate for the deformation. CT compatible markers are placed over anatomical landmarks which are feasible and routinely used in surgical procedures. The TRE is obtained directly for the markers which are placed on the right and left pedicle of the vertebra. The estimated TRE...
On the Spectrum of Modified Theories of Gravity
, M.Sc. Thesis Sharif University of Technology ; Golshani, Mehdi (Supervisor) ; Sheikh Jabbari, Mohammad Mehdi (Supervisor)
Abstract
There are different approaches in modifications of General Relativity as the theory of gravity. The modified theories of gravity are important cases in this context, which mostly start by modifying the Einstein-Hilbert action, while keeping the general covariance. Within the modified theories of gravity, we consider two cases. The first is the f(R) theories of gravity, and the second is curvature squared theories of gravity with an action like S = ∫d4x pg( 116GR + (R)2 + R2 +(R)2). Curvature squared theories of gravity have interesting feautures, most important of which is renormalizability, in contrast with General Relativity. But this advantage, as noted by K.S. Stelle in 1977 comes at...
A Mobility-aware Load Balancing Technique to Reduce Makespan in Fog-Enabled Networks
, M.Sc. Thesis Sharif University of Technology ; Hemmatyar, Ali Mohammad Afshin (Supervisor) ; Safaei, Bardia (Supervisor)
Abstract
Fog computing is essentially the expansion of cloud computing towards the network edge, reducing user access time to computing resources and services. Various advantages of fog computing, including reduced latency, improve user experience; however, user mobility may limit the benefits of fog computing. By moving users from one location to another, their distance from a fog service and consequently the latency may increase. One solution to maintain latency within an acceptable range is the migration of fog tasks and preserving the distance between the user and available resources. Although some research has been conducted on fog task migration, none of them have considered load balancing in...
Effect of building direction on high strain-rate compressive behavior of heat-treated LPBF-maraging steels using Split Hopkinson pressure bar apparatus
, Article Materials Science and Engineering A ; Volume 835 , 2022 ; 09215093 (ISSN) ; Pirgazi, H ; Sanjari, M ; Seraj, P ; Odeshi, A ; Kestens, L. A. I ; Mohammadi, M ; Sharif University of Technology
Elsevier Ltd
2022
Abstract
Rod-shaped samples of maraging steel were additively fabricated in vertical and horizontal directions using laser powder bed fusion technique. The samples were first aged at 490 °C for 6 h and then subjected to dynamic compressive tests using Split Hopkinson Pressure Bar apparatus. The dynamic compression tests were conducted on vertical samples at strain rates of 190, 460, 810, 1100, 1300 s−1. However, the high strain rate tests were performed at strain rates of 120, 615, 745, 890, 2200 s−1 on horizontal samples. After applying the compressive impact loads on the samples, it was found that although horizontally built samples exhibit higher dynamic strength, vertically built samples show...