Sharif Digital Repository

Using the combination of fuzzy clustering estimation and sliding mode control, a technique for controlling the magnetic levitation (ML) systems is introduced. This technique is applied to an experimental setup of an ML system for investigating the method derived. The system considered, is a symmetric rotor supported by a cantilever load cell beam and excited by only one electromagnet of a 4-pole magnetic bearing setup. After demonstrating the experimental setup instruction and the specifications of its parts, the clustering, and the sliding mode control methods are explained briefly, then the quality of implementing the techniques to the setup is described step by step. Finally, the results... 

Using the combination of fuzzy clustering estimation and sliding mode control, a technique for controlling the magnetic levitation (ML) systems is introduced. This technique is applied to an experimental setup of an ML system for investigating the method derived. The system considered, is a symmetric rotor supported by a cantilever load cell beam and excited by only one electromagnet of a 4-pole magnetic bearing setup. After demonstrating the experimental setup instruction and the specifications of its parts, the clustering, and the sliding mode control methods are explained briefly, then the quality of implementing the techniques to the setup is described step by step. Finally, the results... 

The efficiency of an acidizing operation is usually assessed through ordinary well testing methods. These methods are performed only after the acidizing operation, and it is difficult to monitor and evaluate real-time efficiency of acidizing operation. Understanding the performance of the acidizing during the service, by analysis of the acidizing data is a viable approach to this costly and challenging process. The estimation of the skin changes needs an appropriate mathematical method that can handle the main aspects of an acidizing operation. It is tedious to model a real acidizing operation due to the heterogeneity of the reservoir, an unknown reaction rate of acid in reservoir condition,... 

Waterflooding is among the most common oil recovery methods which is implemented in the most of oil-producing countries. The goal of a waterflooding operation is pushing the low-pressure remained oil of reservoir toward the producer wells to enhance the oil recovery factor. One of the important objects of a waterflooding operation management is understanding the quality of connection between the injectors and the producers of the reservoir. Capacitance resistance model (CRM) is a data-driven method which can estimate the production rate of each producer and the connectivity factor between each pair of wells, by history matching of the injection and production data. The estimated connectivity... 

In this paper, the tip tracking control problem of a Timoshenko micro-cantilever beam is investigated. The beam is actuated by a piezoelectric layer laminated on one side of the beam. Dynamic equations of the beam and piezoelectric layer are found using the Hamilton principle. By employing the Galerkin projection method, state space representation of the system is derived. Then, a cascade control loop is used for tracking control of the beam's tip. The cascade control structure consists of an inner loop stabilizer and an outer loop proportional-integral-derivative controller. The stabilizer has a linear feedback form whose states are obtained through a linear observer which is based on the... 

In this paper, the tip tracking control problem of a Timoshenko micro-cantilever beam is investigated. The beam is actuated by a piezoelectric layer laminated on one side of the beam. Dynamic equations of the beam and piezoelectric layer are found using the Hamilton principle. By employing the Galerkin projection method, state space representation of the system is derived. Then, a cascade control loop is used for tracking control of the beam's tip. The cascade control structure consists of an inner loop stabilizer and an outer loop proportional-integral-derivative controller. The stabilizer has a linear feedback form whose states are obtained through a linear observer which is based on the... 

We study diffusive heterogeneous predator-prey system with Holling type-II functional response in the presence of harvesting in prey equation i.e.{-δu=λu-a(x)u2-buv1+mu-ch(x)in Ω,-δv=μv-v2+duv1+muin Ω,∂νu=∂νv=0on ∂Ω, where Ω is a smooth bounded region in RN and a(x) is a nonnegative continuous function on Ω, with Ω0 a region such that Ω⊂Ω and a(x)>0 on Ω\u03a90. We show that in the case of weak prey growth rate, i.e. λ less than the first eigenvalue of -δ in Ω0, the system has a positive solution for the values of μ in a bounded interval and c>0 sufficiently small. We also investigate the multiplicity of positive solutions in this case. When the prey growth rate is strong, we will show that... 

From a thermal point of view, zeotropic mixtures are likely to be more efficient than azeotropic fluids in low-temperature power cycles for reduction in exergy destruction occurring during heat absorption/rejection processes due to their suitable boiling characteristics. In this study, comprehensive energetic and exergetic analyses are mathematically performed for an organic Rankine cycle (ORC) system employing a potential binary zeotropic working fluid, namely R717/water. For this purpose, initially mass, energy, and exergy balance equations are derived. With regard to the similarity in molar mass of R717 (17.03 g mol−1) and water (18.01 g mol−1), there is no need to alter the size of the... 

From a thermal point of view, zeotropic mixtures are likely to be more efficient than azeotropic fluids in low-temperature power cycles for reduction in exergy destruction occurring during heat absorption/rejection processes due to their suitable boiling characteristics. In this study, comprehensive energetic and exergetic analyses are mathematically performed for an organic Rankine cycle (ORC) system employing a potential binary zeotropic working fluid, namely R717/water. For this purpose, initially mass, energy, and exergy balance equations are derived. With regard to the similarity in molar mass of R717 (17.03 g mol −1 ) and water (18.01 g mol −1 ), there is no need to alter the size of... 

In this study, the feasibility of the synthesis of Fe-TiC-Al 2O3 hybrid nanocomposite via mechanical activation followed by carbothermal reduction was investigated. The raw materials including ilmenite, carbon black and aluminum powder were milled in a high energy planetary ball mill. At different time intervals, samples were taken for characterization. After phase evaluation with XRD, some samples were heat treated in an atmosphere controlled tube furnace. Studies proved that increasing the milling time of the raw materials resulted in the formation of more amorphous phase and more active materials. Furthermore, investigations showed that after carbothermal reduction, the synthesized TiC... 

Background: Human amniotic membrane grafting could be potentially useful in ocular surface complications due to tissue similarity and the presence of factors that reduce inflammation, vascu-larization, and scarring. However, considerations like donor-derived infectious risk and the requirement of an invasive surgery limit the clinical application of such treatments. Moreover, the quick depletion of bioactive factors after grafting reduces the efficacy of treatments. Therefore, in the current study, the possibility of nano delivery of the bioactive factors extracted from the human amniotic membrane to the ocular surface was investigated. Materials and Methods: Nanoparticles were prepared... 

Aluminum metal matrix composites (MMCs) reinforced with nanoceramics are ideal materials for the manufacture of lightweight automotive and other commercial parts. Adaptive neuro-fuzzy inference system combined with particle swarm optimization method is implemented in this research study in order to optimize the parameters in processing of aluminum MMCs. In order to solve the problems associated with poor wettability, agglomeration and gravity segregation of nanoparticles in the melt, a mixture of alumina and aluminum particles was used as the reinforcement instead of raw nanoalumina. Microstructural characterization shows dendritic microstructure for the sand cast and non-dendritic... 

In the last few years, an increasing attention has been paid to the issues of saving energy and reducing the manufacturing costs in the transport industry which necessitates further efforts to replace traditional materials like steel with lightweight materials such as plastics, aluminum, magnesium, and composites. Metal matrix nanocomposites have turned into an established material in today's industry with an ongoing expansion in their field of applications. In this study, the formation of nanoparticle-aluminum metal matrix composites is described by compocast processing from nanoparticle Al2O3 and the A356 aluminum alloy. In order to optimize the processing parameters, a novel approach is... 

Aluminum metal matrix composites (MMCs) reinforced with nanoceramics are ideal materials for the manufacture of lightweight automotive and other commercial parts. Adaptive neuro-fuzzy inference system combined with particle swarm optimization method is implemented in this research study in order to optimize the parameters in processing of aluminum MMCs. In order to solve the problems associated with poor wettability, agglomeration and gravity segregation of nanoparticles in the melt, a mixture of alumina and aluminum particles was used as the reinforcement instead of raw nanoalumina. Microstructural characterization shows dendritic microstructure for the sand cast and non-dendritic... 

A highly sensitive and simple indirect spectrophotometric method has been developed for the determination of trace amounts of inorganic mercury (Hg2 +) in aqueous media. The method is based on the inhibitory effect of Hg2 + on the activity of horseradish peroxidase (HRP) in the oxidation of ascorbic acid by hydrogen peroxide followed by the reduction of Au3 + to Au-NPs by unreacted ascorbic acid and the measurement of the absorbance of localized surface plasmon resonance (LSPR) peak of gold nanoparticles (at 530 nm) which is directly proportional to the concentration of Hg2 +. Under the optimum conditions, the calibration curve was linear in the concentration range of 1-220 ng mL- 1. Limits... 

A new structure is suggested for simultaneous microwave chirped pulse generation and array antenna beam steering. It is based on using a multi-channel fiber Bragg grating in a photonic microwave delay-line filter. The paper presents a feasibility study of the idea, discussing the main performance parameters of both signal generation and beam steering functions. Specifically, it focuses on the effects of wavelength tuning, resolution and accuracy. The study shows that custom off-the-shelf components could be used to implement an all optical system capable of generating chirped pulses while steering the radiation pattern of a small sized antenna array. The advantages of the structure for... 

A semi-analytical formulation is presented to quantify the effects of group delay ripple on the performance of an optical beam-former. For delay elements, implemented with commercially available multi-channel fiber Bragg gratings, an impulse response is introduced and calculated for the group delay ripple. To do this, the transfer function of the fiber Bragg grating is parted into two dispersive and non-dispersive sections. This will also easethe demonstration of the fiber Bragg grating as a true time delay element. The formulation is applied to an ultra-wideband pulsed array of antennas. As an example the array factor and electric field patterns of a four element antenna array is derived,... 

Limitations imposed by the non-linearity of optical links, in the front end of a receiving array antenna, on the performance of a pulse compression radar are studied. Particularly linear frequency-modulated waveforms backscattered from a pair of targets are inspected. Inter-modulation and gain compression by noise are presented as two remarkable phenomena. For an interconnection of two dual-drive Mach-Zehnder modulators, the sensitivity of the compressed echo at the output of a matched filter receiver to certain tunable parameters is studied numerically. Finally, certain values of DC bias and phase shift between the modulators' electrodes are recommended