Loading...
Search for:
shabanzade--mostafa
0.154 seconds
Total 175 records
Development of Printing Methods for Fabrication of Perovskite Solar Cells
, M.Sc. Thesis Sharif University of Technology ; Taghavinia, Nima (Supervisor)
Abstract
The highest efficiency of Perovskite solar cells that is attained up to now, is around 24%. This champion solar cell is prepared under vacuum. This method suffers from low rapidity, small deposition area and high cost which are not compatible with commercialization. Printing method has a special position in mass production of electronic equipment, such as solar cells. This method has the potential of high rapid, low cast and repeatable deposition. In this thesis, I introduce a novel deposition method, named Capillary Adhesion Coating, which is based on capillary concept. The novel deposition method coats infinite perfect thinfilms with high rapidity and low cost. After the introducing of...
Study, Analysis & Optimizing The Process Of Approval, Design & Implementation Of Projects In The Iranian Oil Terminal Company(IOTC)
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
Since the Iranian oil terminals company(I.O.T.C.) has been the main and strategic gateway of exporting petroleum in the country and plays an important role in the optimum continuity of national, regional and international energy supply chain and also conducting the needed projects whit a desirable quality and minimum time and cost has a prominent influence on steady continuity of manufacturing, importing and exporting of petroleum and gas production. The main purpose of doing this thesis is diagnosing the process of approval, design and implementation of projects in the I.O.T.C., Thus, whit regarding to the modern needs of implementing projects and the necessity of reviewing the structure...
Study & Analysis of Delays Causes of Gas Projects in Tehran Gas Company & presenting Optimized Solutions by Applying Project Management Principles
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
To deliver gas in time to different consumers like as industrial, commercial and domestic users is one of the most important parts in gas industry. So it is very important to utilize these projects in the specified time. There are huge harms for client, contractors and consumers when there is a delay in project utilization. To identify effective parameters on delays to remove them in future is an essential factor. In this research, all delay causes for TPGC (Tehran Province Gas Company) projects are analyzed and some solutions to remove these delays are presented. 10 hypotheses in relation of gas delivery have been assumed as delay causes. Then some questions have been discussed in relation...
Service Level Agreement Templates and Guides for Implementing, using eTOM
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
Nowadays, in communication industry, specially data network, in which service quality is a serious parameter, request for making connection with appropriate quality (Proportionate to demands) and necessity of clarification of obligations of service providers and customers, as well as customer awareness of submitted materials and offering various services with different qualities & costs, led service providers, specially IP based networks, to make agreements with their customers, entitled service Level Agreement (SLA). The SLA specifies the service type, mutual obligations, related parameters, measuring methods, violation threshold, penalties and loss compensation. Whereas, applying...
Condition Monitoring of Water Pipelines by Using Acoustic Method a Study of Leak Detection in ABFA
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
Water is crucial to human being. We use water for a wide variety of uses daily. However, leakage has caused substantial water loss to our precious processed water. The major contributor to non-revenue water in Iran is pipeline leakages. The water industry in the nation has invested in equipment to detect and localize leaks in water distribution systems. One of the equipment mentioned is acoustic-based. The principle of acoustic is that whenever a leak is present in a pipeline, noise is generated and will travel along the pipeline. The acoustic leak detection method is then derived by calculating the distance traveled by this noise generated by the leak. Different equipment based on acoustic...
Assessment and Performance Improvement of Hierarchical Voltage Control System
, M.Sc. Thesis Sharif University of Technology ; Parniani, Mostafa (Supervisor)
Abstract
Hierarchical voltage control is one of the conventional kinds of coordinated voltage control schemes which has been studied in some countries in the last decades. In this method network is divided into several voltage control regions and in each region voltage profile is controlled near optimal level, satisfying the economic and secure goals of the network performance. In this thesis, after the explanation of the main concepts of this scheme, its effects on the network voltage control is assessed and its performance is improved. First the primary concepts of hierarchical voltage control are explained. Then, the methods of the control regions determination and pilot nodes selection are...
Analyzing the Healthcare Wastes and Feasibility Study of Related Items (Plastics)
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
Increasing population and competition for producing various productions and also more consumption in recent decades, result in producing more wastes. Therefore effective and continuous waste management is essential for monitoring the process (from the wastes generation source to the waste disposal) and establishing the efficient strategies to reduce wastes. One of the major sources of waste generation is hospitals that cause lots of environmental problem unless they are managed properly.Recycling is an important element of waste management that can reduce costs by innovative and proper management. The purpose of this research is identification of recyclable plastic items and estimates the...
The Analysis of Total Productive Maintenance Based on Computerized Maintenance Management System
, M.Sc. Thesis Sharif University of Technology ; mostafavi, mostafa (Supervisor)
Abstract
The main purpose of this thesis is to analyze the total productive maintenance based on computerized maintenance management system. At first, a detailed study on total productive maintenance is performed and then the requirements of this maintenance strategy are specified. Also, a computerized maintenance management system is defined which can help total productive maintenance to reach to its requirements. Finally, a conceptual model and entity-relationship model for computerized maintenance management system data base has been created
Study of HVDC Transmission for Offshore Wind Farms Based on Voltage Source Converters
, M.Sc. Thesis Sharif University of Technology ; Parniani, Mostafa (Supervisor)
Abstract
In this thesis, DC transmission of offshore wind farms is studied thoroughly. Various system configurations that are introduced in the literatures are discussed and their control scheme for normal conditions and grid faults are studied. Then, the HVDC transmission based on voltage source converter, located between a local offshore ac grid and the onshore ac system is investigated as the most practical choice. The HVDC linke circuit elements are calculated and the control strategies of the offshore and onshore converters are introduced. DFIGs are considered to be the best choice for the offshore wind turbine generators. Then, the system is simulated and the frequency of the offshore grid is...
Feasibility Study of Manufacturing of Disposable Plant Containers
,
M.Sc. Thesis
Sharif University of Technology
;
Mostafavi, Mostafa
(Supervisor)
Abstract
Although laws vary in the competitive business world of today and the changing supply and demand parameters show that the process of delivering new products to market is very important.Most organizations today have found that spending more than ever on trusting in traditional competitive levers such as quality, cost reduction and differentiation in selling more products and services are not enough to be successful in market, instead notions such as speed, flexibility andagility can have a significant trend toward offering new products and services. There aresome good reasons for knew that organizations need new ways to develop their new products to survival, compete with its competitors and...
Modified Load Scheduling Using Smart Meters
, M.Sc. Thesis Sharif University of Technology ; Parniani, Mostafa (Supervisor)
Abstract
Implementation of various incentive-based demand response strategies has great potential to decrease peak load growth and customer electricity bill cost. Using advanced metering and automatic demand management makes it possible to optimize energy consumption, to reduce grid loss, and to release generation capacities for the sake of providing sustainable electricity supply, and reducing electricity bills for the customers. With these objectives, this thesis examines the previously suggested load scheduling programs in both residential and industrial sectors, and proposes new practical strategies for load management. This thesis has mainly focuses on three subdivisions of load management...
Coordinated Voltage Control of Power Systems in Normal and Emergency Operation States
, Ph.D. Dissertation Sharif University of Technology ; Parniani, Mostafa (Supervisor)
Abstract
One of the main objectives in operating a power system is to maintain the system voltage properly to avoid equipment damage and transfer power efficiently. Automatic control of transmission network voltage provides significant improvements in security, quality and efficiency of power system operation. This thesis investigates coordinated voltage control of power systems in normal, alert and emergency states. The aim is to propose a comprehensive framework for real-time operation of practical power systems, ensuring secure operation of the system in the normal state and after occurrence of sever contingencies.
At the first, a new coordinated voltage control scheme is proposed to ensure...
At the first, a new coordinated voltage control scheme is proposed to ensure...
Feyerabend’s Point of View on Scientific Progress
, M.Sc. Thesis Sharif University of Technology ; Taghavi, Mostafa (Supervisor)
Abstract
Feyarabend’s philosophy of science is against method and rule such that he believes that “anything goes”. However, he sometimes applies the term “progress”. Reviewing his publications shows that from his point of view, progress is qualitative and relative. So, unlike other philosophers of science Feyarabend ignores the clarification of the concept; subsequently, his applications of the term “progress” are somewhat ambiguous. However, by studying his philosophy, one may realize what should be done to achieve progress in any sense. The affirmative aspect of Feyerabend’s philosophy, while highlights the social and ethical elements, considering his humanitarian outlook as well as his special...
Analyzing Cost Engineering Along With Presenting A Model To Reduce Cost Of industrial Products
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
Lack of financial sources for production and performing projects has been an effective issue in all governmental and non-governmental organizations. So, using a structure with capability of detecting and forecasting all expenses and costs, and being able to convert the mass of data into useful and instrumental reports for managerial decision such as estimating total cost, selecting the syntax of production and etc is obvious for recourse management of every organization. Among the various components of the cost engineering system, cost management system by recording and allocating cost is an important issue in efficiency of every cost engineering system.In this thesis, Automotive Industrial...
Feasibility Study of Producing Active Pharmaceutical Ingredient from Conceptual Process to Mass Production-Case Study
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
The main aim of this thesis is to develop the technical knowledge of designing and making active ingredients of domestically produced drugs, decreasing the costs, independency in producing these products, and checking outflow of currency. It also aims to reduce the financial challenges of patients who have to pay huge amounts for such drugs. Conducting research in the field of reverse engineering and using its definition, and attempt in made to get knowledge into the stages of product development process, to determine the technical standards associated with each stage, to recognize how knowledge is shared during this process, and to present some methods of establishing the infrastructure...
The Analysis of Knowledge Management, Dimensions and Implementation Methods-Case study: Sardsaz Khodro Ind. Co
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
Today, organizations are surrounded by basic and continuous changes such as declining organizational resources, reduction of the production cycles, and the need for rapid adaption. Those organizations remain competitive while maintaining their productivity, that have following characteristics: accurately plan and assess their knowledge resources, create and absorb beneficial knowledge, store and organize their knowledge, disseminate knowledge to needed areas, and use knowledge in practice and decision making, to improve their products/services as well as their performance. Therefore, the human capital has been considered as knowledge owners and the most important organizational resource, on...
The concept of Social Ethics and Its Relation to the Politics from Hobbes Point of View
, M.Sc. Thesis Sharif University of Technology ; Taghavi, Mostafa (Supervisor)
Abstract
In this thesis, I study the concept of social ethics from a modern point of view. What I call modernity, is the fundamental philosophical revolution happened in the sixteenth and seventeenth centuries in Europe, this period is called “Enlightenment”, what I assume is from Machiavelli to Kant. One of the most important philosophers belongs to this enlightenment period is Thomas Hobbes, a Scottish philosopher whose main book “Leviathan” is well-known as the basis of the modern politics. Modern politics makes sense against classical one, founded by Aristotle in a book mentioned under the same title. What Hobbes describes as society based on public interests etc. is in a different point of view...
Optimal Design of Mircogrid Components Containing Renewable Resources
, M.Sc. Thesis Sharif University of Technology ; Parniani, Mostafa (Supervisor)
Abstract
Nowadays, microgrids which comprise decentralized generation (DG) have attracted considerable attention. Establishment of DG-based microgrids that are normally connected to the main grid, is a practical method to reduce the costs of power outage and to increase the electricity supply reliability. The aim of this thesis is optimum planning of a microgrid containing wind turbines, photovoltaic systems and diesel generators, considering both the grid-connected and isolated modes of operation.
In the areas with considerable solar radiation and wind potential valuable opportunities exist in utilizing these resources. In addition to these renewable resources, the use of controllable resources...
In the areas with considerable solar radiation and wind potential valuable opportunities exist in utilizing these resources. In addition to these renewable resources, the use of controllable resources...
Micro-Grid Protection in Presence of Inverter Based Distributed Generation
, M.Sc. Thesis Sharif University of Technology ; Parniani, Mostafa (Supervisor)
Abstract
In this study, control and protection of low voltage microgrids have been analyzed. Studied microgrid takes the advantages of inverter based distributed generation. One of the most important issues in inverter based microgrids is the control of its distributed generation. Since, the low voltage networks have single phase loads and many imbalances, these imbalances can affect the control of IBDGs (inverter based distributed generations). This issue in the islanded mode of operation is the most important, because in this mode of operation, IBDGs control the network voltage and frequency.
In this thesis, the different control strategies of IBDGs are reviewed, and then modified to address...
In this thesis, the different control strategies of IBDGs are reviewed, and then modified to address...
Cost Engineering: Objectives, Dimensions and to Study Cost Engineering Methods and Models with an Approach to a Proper Model in Manufacturing Activities-case Study: Mapna Locomotive Engineering and Manufacturing Company
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
In the process of industrial and economic development and in the competitive environment in the world, reducing the cost of industrial products is an important factor for more customers' satisfaction, more revenue acquisition, and stability and success in the business. Cost engineering is the area of engineering practice concerned with the application of scientific principles and techniques to problems of cost estimating, cost control, business planning, management science, profitability analysis, project management, planning and scheduling. In this research through the studying the structures and models of cost engineering, in addition to consider this dimensions of cost engineering, the...