Loading...
Search for:
shafiei--mohammad-javad
0.154 seconds
Total 5560 records
Optimization of Coordinated Distribution System by Adopting the Network Marketing and Traditional Channel
, Ph.D. Dissertation Sharif University of Technology ; Modarres, Mohammad (Supervisor)
Abstract
Nowadays network marketing has promoted marketing, sale and customer relationship altogether. On the other hand, due to the growth of internet, network marketing has become a powerful and attractive channel that can be utilized alongside the other traditional channel. Pricing and network marketing structure influences on distribution system coordination and networker motivation in network marketing. This thesis provides a framework to study the integration of network marketing with retailers in a dual channel distribution system and provide the pattern for determining the different variables of distribution systems, including of product price in diverse channels, commission payment to...
Experimental and Modeling Investigating of Foam Flow Behavior Stabilized by Nanoparticles in Porous Media
, M.Sc. Thesis Sharif University of Technology ; Ghazanfari, Mohammad Hossein (Supervisor)
Abstract
Gas injection as an enhanced oil recovery (EOR) method usually suffers from low recovery efficiency. The low viscosity and density of gas as well as reservoir heterogeneity are the main reasons of early breakthrough and override of gas in oil reservoirs. To mitigate the poor sweep efficiency of gas injection, surfactants can be co-injected or injected in an alternating manner with gas to form foam within the reservoir rock. The foam formation can reduce the mobility of the injection fluids in porous media. A significant challenge of foam injection is the stability of the foam in formations and the foam liquid drainage rate is one of the key factors which characterize or show the efficiency...
Experimental Investigation of the Effects of Asymmetrical Grooves on Thermosyphon Heatpipes
, M.Sc. Thesis Sharif University of Technology ; Behshad Shafiei, Mohammad (Supervisor)
Abstract
technologies for cooling of electronic devices, have high efficiency due to the heat transfer in two-phase state. In this project, experimental effects of asymmetric triangle groove has been studied on the boiling fluid and effect of the motion on the boiling and heat pipe. Therefore, the experiment has been done by 3 heat pipes and each with 3 plates. The plates consist of a smooth plate, a plate with triangle groove and a plate with rectangle groove. Each heat pipe was filled by methanol in volumetric percentage from 10 to 60. The results show that 20 percent methanol is the optimum for all kind of heat pipe, which has been used. In addition, it is shown that heat pipe with triangle groove...
Correction of Time-Dependent Origin-Destination Demand in Dynamic Traffic Assignment
, M.Sc. Thesis Sharif University of Technology ; Zakaei Ashtiani, Hedayat (Supervisor)
Abstract
Time-dependent origin-destination demand is a key input in dynamic traffic assignment in advanced traffic management systems, and the result of dynamic traffic assignment is dependent on the accuracy of this information. One method to achieve time dependent demand matrices is using a primary demand matrix and volume traffic counts in some links of network. In this thesis a bi-level model is used to correct the demand matrix and the extended gradient method is suggested to solve the problem. The extended gradient is an iterative method that in each iteration, corrects the demand matrix in a way that the estimated traffic flow be close to the observed traffic flow. Execution of this method in...
Modeling and Dynamic Analysis of Anti-Lock Braking System Modulator
, M.Sc. Thesis Sharif University of Technology ; Behzad, Mahdi (Supervisor)
Abstract
Anti-lock brakes car as one of the most fundamental and vehicle stability control system is considered. Solenoid valves, one-way valves, Accumulator, damper orifices and other components is a crucial role in the anti-lock system performance, so that the performance of the system and thus affect the dynamic performance of the vehicle. This is the most important part of the anti-lock brake System and These components are all new brake system.In this study a complete modeling of hydraulic control unit and obtain sufficient data to model the dynamic behavior of the hydraulic control unit to be seen. operators working in higher frequencies are weak and virtually reached saturation and efficient...
Effect of Co Doping on Crystal and Electronic Structure of BaFe2-xCoxAs2
, M.Sc. Thesis Sharif University of Technology ; Khosroabadi, Hossein (Supervisor) ; Akhavan, Mohammad (Supervisor)
Abstract
The discovery of the iron-based superconductors attracted much experimental and theoretical attention in the recent years. BaFe2As2 is one of the highlighted materials which is the antiferromagnetic metal (below Neel temperature) and undergoes to superconducting and non-magnetic state by variety of doping, usually accompanied by a structural phase transition. Superconductivity is appeared in this system by doping Co and Ni at the Fe sites which is one of the excited situations in the physics of superconductors, where the magnetic doping suppresses the superconducting state. So, the study of Co doping of the electronic structure of this system, might lead us to better understanding of the...
, M.Sc. Thesis Sharif University of Technology ; Abedini, Javad (Supervisor)
Abstract
In this piece of work, a gravity model is suggested as Iranian non-fuel export model to OIC countries. The most important results out of this model are the acquired coefficients of two variables, namely “ECO membership” and “Economic and Trade Freedom of Importer”. At first, we expected that for importer, being a member of ECO would increase the amount of trade with iran. Surprisingly, this is not what we see in a model. In fact, as ECO has not achieved any tangible success in increasing trade between its members, eastern Asian Muslim countries has become an important trade partner for iranians. This result is compatible with other pieces of researches about ECO. “Economic and Trade Freedom...
Relay-assisted Multiple-input Multiple-output Underwater Wireless Optical Communication Systems
, M.Sc. Thesis Sharif University of Technology ; Salehi, Javad (Supervisor)
Abstract
Today’s growing interest to the underwater explorations and navigations demands to design appropriate underwater communication methods and systems. However, radio frequencies which are widely being used in free space communications, can’t be a good candidate for underwater wireless communications, due to their sever attenuation in water. On the other hand, underwater acoustic communication has been widely studied and implemented in the past decades, inspired by suitable propagation of acoustic waves through the underwater medium. Nevertheless, acoustic communication systems have limited bandwidth, lower propagation speed and lower security than optical counterparts, which suggests underwater...
Mobility-Aware Resource Allocation in Hybrid Visible Light Communication and 5G Radio Access Technologies Networks
, M.Sc. Thesis Sharif University of Technology ; Salehi, Javad (Supervisor)
Abstract
Visible light communication (VLC) uses huge license-free spectral bandwidth of visible light for high-speed wireless communication. Since each VLC access point covers a small area, handovers of mobile users are inevitable. In order to deal with these handovers, developing fast and effective resource allocation algorithms is a challenge. this paper introduces the problem of mobility-aware optimization of resources in hybrid VLC and 5G radio access technologies networks using the T-step look-ahead policy and employing the notion of handover efficiency. It is shown that the handover efficiency can correlate the overall performance of the network with future actions based on the mobility of...
Introducing a Numerical Method for Estimating Median Crack Depth during Machining on Optical Glasses
, Ph.D. Dissertation Sharif University of Technology ; Akbari, Javad (Supervisor)
Abstract
In present research, a cohesive based finite element model has been introduced to estimate median crack depth during mechanical machining on optical glasses. Development of the machining numerical model has been initiated by investigating the indentation process. Experimental results of this step have been calibrated primary numerical model which has been used in the scratch process. Due to differences between the scratch mechanism and indentation one, mathematical bases fracture formulas and cohesive relations have been developed. After extracting primary result, using them in the scratch model and developing the primary model, ultimately numerical model has been evolved to an abstract...
Production of Uranium Dioxide Nano Powder With Hydrothermal Method in Supercritical Water Reactor
, M.Sc. Thesis Sharif University of Technology ; Outokesh, Mohammad (Supervisor) ; Ahmadi, Javad (Supervisor) ; Karimi Sabet, Javad (Co-Advisor)
Abstract
Hydrothermal supercritical method is one of the most suitable methods for metal oxide nano powder, ceramics and mineral catalyst synthesis. Metal oxides nanopowder in its pure or mixed form has wide potential application as chemical industrial catalyst, hot Superconductors, magnetic material, gas sensors and car catalyst convertors. One of the most important metal oxides aspects of application is uranium oxide as nuclear reactor fuel is used. In addition, UO2 is selective catalyst for converting methane to methanol process and Decomposition of organic Chlorine material. In Supercritical hydrothermal method done in high pressure reactor with critical to fluid, is new method for the...
Lithium Isotopes Separation by Electrolysis Amalgam by a Continuous Method
, M.Sc. Thesis Sharif University of Technology ; Outokesh, Mohammad (Supervisor) ; Ahmadi, Javad (Co-Advisor)
Abstract
Lithium has 9 isotopes which two isotopes are stable and remaining isotopes are unstable and have half-life. Lithium stable isotopes include 6Li and 7Li that their abundance is 7.53% and 92.47% respectively. Importance of lighter lithium isotope appears for its small cross section against thermal neutron and producing fusion reactors fuel in nuclear industries. Thermal neutron absorption cross section for 6Li and 7Li are 950 barn and 37 mbarn respectively. Interesting of these isotopes in nuclear industry is due to the large difference in the absorption cross section.6Li compounds implied for tritium producing in coat of nuclear fusion reactor with DT fuel. Following tritium is used in...
Investigation and Numerical Simulation of Two-Phase Ejectors for Use in the Water Desalination Cycle
, M.Sc. Thesis Sharif University of Technology ; Shafiei, Mohammad Behshad (Supervisor) ; Sani, Mahdi (Co-Supervisor)
Abstract
Energy efficiency in desalination systems is primarily hindered by high-energy-consuming equipment, such as compressors. This study explores a novel cycle of combined ejector desalination involving a two-phase state and a solar vacuum tube collector designed to generate saturated steam at a lower temperature. The mechanism involves water entering the ejector's primary nozzle in the liquid phase, pulling steam generated by the collector at a reduced pressure and temperature. This process facilitates the separation of desalinated water from saltwater, resulting in purified water in a variable phase. The performance of the ejector was thoroughly evaluated, including how primary and secondary...
An experimental and computational study on the rate constant of electrochemically generated n-acetyl-p- quinoneimine with dimethylamine
, Article International Journal of Electrochemical Science ; Vol.3, Issue 10 , September , 2008 , PP. 1092-1107 ; 14523981 ; Haqgu, M. (Mohammad) ; Nematollahi, D. (Davood) ; Gholami, M. R. (Mohammad Reza) ; Sharif University of Technology
2008
Abstract
Electrochemical oxidation of acetaminophen (N–acetyl–p–aminophenol) (1) has been studied in the presence of dimethylamine (2) as a nucleophile in aqueous solution, by means of cyclic voltammetry and controlled-potential coulometry. The results indicate the participation of electrochemically generated N-acetyl-p-quinoneimine (1a) in Michael reaction with dimethylamine (2). Based on ECE mechanism, the observed homogeneous rate constant (kobs) of the above mentioned reaction is estimated by comparing the experimental cyclic voltammograms with the digital simulated results. Further more; kinetics and mechanism of the reaction were studied with ab initio calculation, Monte Carlo and QM/MM...
Development of Model for Evaluation of Energy Technologies and R&D Planning
, Ph.D. Dissertation Sharif University of Technology ; Ghofrani, Mohammad Bagher (Supervisor) ; Saboohi, Yadollah (Supervisor)
Abstract
In this research work an analytical instrument has been developed for assessment of energy technologies, R&D resource allocation and technology development. Development of new technologies has been considered according to the specific conditions of developing countries. The analytical instrument includes two models interlinked with each other: energy technology assessment and optimal control of innovation activities. Energy technology assessment and prioritization of new energy technologies are provided by the model of the energy supply system that contains a detailed representation of current and emerging technologies characterized in terms of their technical indices. The results of this...
Design and Analysis of an Improved System for Recovering Ventilated Air Heat in DX HVAC Systems
, M.Sc. Thesis Sharif University of Technology ; Roshandel, Ramin (Supervisor) ; Shafiei, Mohammad Behshad (Co-Advisor)
Abstract
In the last three decades, the world has experienced enormous increases in energy consumption as a consequence of the economic and population growth. This causes renewable energy and energy recovery to become a requirement in building designs rather than option. A direct expansion (DX) air conditioning system is an efficient way to supply fresh and dehumidified air to a built environment a long side it plays a key role in preventing the spread of respiratory diseases. To improve the efficiency of a conventional DX system in hot and humid regions, fresh air dehumidification and conditioning systems with energy recovery measures are the key equipment to reach such a goal. To achieve this goal...
A Study on Automatic and Early Detection of Lameness in Dairy Cattle
, M.Sc. Thesis Sharif University of Technology ; Akbari, Javad (Supervisor)
Abstract
Lameness in dairy cattle is a crucial welfare issue in dairy industry, and over the years scientists are attempting to present a detection method. In recent years it is attracting more attention to make the identification and discrimination of sounds and lames systematic and automatic. Right now, the most hopeful results have been obtained through the measurement of Ground Reaction Forces (GRF) of hooves, and analysis of load distribution between four legs, which seems applicable for wide use in dairy industry. However, the accuracy, validity, and reliability of discrimination is still far from an acceptable point, that is because of a great lack in understanding quantitative effects of the...
Boron Isotope Separation by Distillation of BF3-(C2H5)2O Complex
, M.Sc. Thesis Sharif University of Technology ; Otukesh, Mohammad (Supervisor) ; Ahmadi, Javad (Supervisor)
Abstract
Natural boron consists of two stable isotopes, mass 10 (19.3%) and mass 11 (80.7%). 10B isotope has a large thermal neutron capture cross-section and it therefore, used widely in such aspects as modern industry, military equipment, medical science and so on. specially the demand of atomic energy industry for the boron isotope is increased severely. So the separation of 10B from natural boron has received very wide attention at present. There are many kinds of methods on the boron isotopes separation, such as chemical exchange reaction and distillation in boron trifluoride method, ion exchange in boric acid solution method, counter current recycle membrane cascades in boron trifluoride...
The Synthesis and Characterization of Nano Zeolitic Molecular Sieve for Separation of 133Xe from 85Kr
, Ph.D. Dissertation Sharif University of Technology ; Kazemeini, Mohammad (Supervisor) ; Ahmadi, Javad (Supervisor)
Abstract
In this study the feasibility of xenon separation from xenon-krypton mixture was investigated by utilizing of the chromatographic column filled with nano and micron sized NaY zeolite. For this purpose the nano NaY with the yield of 100% related to Al2O3 and the average size of 98.6 nm was synthesized through the clear solution method with the mid-adding of NaOH. Furthermore, a novel method for granulation of nano zeolite was developed by utilizing sodium alginate as an external template. In this method the production of uniform spherical granules with the different sizes in the range of several milimiteres to 100 µm was easily performed. Moreover, the results showed that the adding of...
Separation of Boron Isotopes by Distillation of (CH3)2O-BF3 Complex
, M.Sc. Thesis Sharif University of Technology ; Outokesh, Mohammad (Supervisor) ; Ahmadi, Javad (Supervisor)
Abstract
Natural boron includes two stable isotopes 10B and 11B with 19.3 and 80.7 weight percent respectivley.10B isotope has a high thermal neutron absorption cross section. So isotope 10B material is suitable for making atomic reactor control rods. Other and even more important applications of 10B are in disclosing neutrons in order to measure neutron reactors fluxes and also are in nuclear physics laboratories and medical radiation. This isotope also is used in the pharmaceutical and the military industries. There are several methods for separating boron isotopes. Among the distillation methods, thermal diffusion of BF3, distillation of BF3, distillation of methyl borate, boric acid distillation...