Sharif Digital Repository

In this research, a coupled numerical-experimental analysis of crack propagation, crack coalescence, and breaking process of jointed rock slopes is performed by studying the mechanical behavior of pre-cracked brittle substances considering the specially prepared rock-like specimens (rock-like specimens are specially prepared by a proper mixing of Portland Pozzolana Cement (PPC), fine sand, and water in a rock mechanics laboratory) and natural rock slopes, simultaneously. The numerical analyses are accomplished using a numerical code based on the higher-order displacement discontinuity method (HODDM). A cubic displacement discontinuity variation along each boundary element is assumed to... 

Rocks and rock-like materials frequently fail under compression due to the initiation, propagation and coalescence of the pre-existing microcracks. The mechanism of microcrack coalescence process in rock-like materials is experimentally and numerically investigated. The experimental study involves some uniaxial compression tests on rock-like specimens specially prepared from portland pozzolana cement, mica sheets and water. The microcrack coalescence is studied by scanning electron microscopy on some of the prepared thin specimens. It is assumed that the mica sheets play the role of microcracks within the specimens. Some analytical and numerical studies are also carried out to simulate the... 

The pre-cracked Brazilian disc specimens of rock-like materials (Portland Pozzolana cement (PPC), fine sands, and water) are especially prepared in a rock mechanics laboratory to study the breaking process of brittle solids. The Brazilian discs may contain one, two, three, four, and five (parallel) center slant cracks (45° to the horizontal) under compressive line loading. The breaking load of the pre-cracked disc specimens is measured showing that as the number of cracks increases, the final breakage load of the specimen decreases. The experiments are carried out under compression (just like the Brazilian tests used for measuring the indirect tensile strength of intact rocks). It has been... 

Crack propagation processes in specially prepared concrete discs and rectangular specimens containing a single cylindrical hole or multiple holes of varying diameters have been studied both experimentally and numerically. In this research, the cracks coalescence paths in Brazilian disc and rectangular specimens made from rock-like material containing multi-holes are investigated. These concrete specimens are specially prepared from an appropriate mixture of Portland Pozzolana Cement (PPC), fine sands, and water. The pre-holed Brazilian discs and rectangular specimens are experimentally tested under compression. The breakage load in the ring type disc specimens containing an axial hole with... 

Data are presented on the solidification of aluminum alloys and their macro segregation behavior. Three alloys with different solidification ranges were prepared in two temperatures. Two types of molds were also prepared by sand and metallic materials. The solidification of Al alloys were studied and the effects of four parameters were determined, including cooling rate, casting temperature, degassing and nucleation effects on solidification and a comparison was conducted to Scheil model performance. Three types of aluminum alloys (Al-12.1%Si, Al-6.9%Si and Al-4.4% Cu) with short, medium and wide solidification ranges were studied and the results showed that degassing, nucleation, increasing... 

A new model is developed for the structure of nanocrystalline materials. Based on the developed model, a new approach for investigating the effect of grain size on the elastic moduli of nanocrystalline materials is introduced. The predictions of the model are strongly correlated with the experimental results reported in the existing literature  

Kinematic mismatch between exoskeletons and human body results in excess internal forces/torques and hence discomfort as well as increase the power consumption. The connection stiffness has been shown to have potentials for minimizing the kinematic mismatch effects. However, realization of a desired stiffness in the connection element seems difficult if not impractical. In this work, adding controlled backlash to the exoskeleton-body connection is investigated as a possible solution for the kinematic mismatch challenge. A stiffness model which includes backlash parameters was formulated and identified experimentally using three male subjects on a typical lower extremity exoskeleton. A... 

Network marketing is a business model that depends upon a network of distributors for growth, such as in multilevel marketing. A direct selling method features independent agents that make up a distribution network for goods and services. This paper provides a framework to study the network marketing by adopting the traditional channel. To motivate all distributers in network marketing as well as retailers, it is required to design a well-balanced distribution and pricing system. The allocated commission for distributers in different layers of network marketing is part of pricing system, which is vital. In this paper, we develop an approach to determine all elements of system, including... 

Standpoints about atrium design have been revolutionized. Nowadays, design of atrium is not only for shine of light, but is also for natural ventilation as well. In high rise building, residents have not a same advantage of buoyancy-driven ventilation that arising from existence of atrium. One strategy to more equalize ventilation and thermal comfort in different levels, is designing building with various opening area in different heights. Present study aims to overcome the problem by changing the atrium shape. Thus, the atrium's wall angularity is changed in different case studies and these shapes are compared with each other in order to find the relations between atrium wall angularity and... 

In the present article, a new model for inverse Hall-Petch relation in nanocrystalline materials has been proposed. It is assumed that lattice distortion along grain boundaries can cause internal stresses and high internal stresses along grain boundaries can promote the grain boundary yielding. The designed model was then verified using the nanocrystalline-copper data. The minimum grain size for inverse Hall-Petch relation is determined to be about 11 nm for Cu. © 2008 ASM International