Sharif Digital Repository

CdSe nanowires were grown in polycarbonate track etched membrane with pore diameter of 80 nm by an electrochemical deposition technique. The mechanism of the growth was studied during the potentiostatic deposition of nanowires. X-ray photoelectron spectroscopy and energy dispersive spectrometry results showed binding of fragments and fraction of atoms for the CdSe nanowires. Microstructure and morphology of synthesized CdSe nanowires were observed by scanning electron microscopy. Optical spectrophotometry technique was used to determine the energy band gap of CdSe nanowires. It was found that the nanowires were resistive in the dark and exhibited a pronounced visible light photoconductivity.... 

In this study, dynamic adsorption behavior of different gaseous volatile organic compounds (VOCs) on a new modified M-MIL-101(Cr) was investigated with a great emphasis on gasoline adsorption. The M-MIL-101(Cr) was synthesized, along with comprehensive purification procedures, using a new linker to cluster molar ratio (2:1 instead of 1:1) and different modulators (i.e. HF and HNO3). All prepared adsorbents were characterized by XRD, FTIR, FE-SEM and N2 adsorption-desorption at 77 K. The results showed that surface area and pore volume of the M-MIL-101@Free (i.e. modified MIL-101(Cr) with using any modulator) which were 4293 m2/g and 2.43 cm3/g, greatly elevated up to 37.2% and 71.6% against... 

Pure tin oxide nanoparticles ware synthesized via Co-precipitation method. The as-synthesized nanoparticles were characterized by Fourier transform infrared spectroscopy (FTIR), thermo-gravimetric analysis (TGA), X-ray diffraction (XRD) and diffuse reflectance spectroscopy (DRS). X-ray diffraction shows that tetrahedral shaped nanoparticles of crystallite size 47.35nm were prepared successfully. The crystallinity was established due the reduction in distortion ratio and dislocation density. The value of strain showed that the nanoparticles fabricated were of high stability. The direct and indirect optical band gap of as-synthesized SnO2 nanoparticles were determined from the reflectance... 

An enhancement in heat transfer due to nanofluids is essentially required in various thermal systems. Hybrid nanofluids possess high thermal conductivity and, have ability to embellish and enhance the thermal strength of common fluids. Our concern in this paper is to examine the innovative attributes of hybrid nanofluids like Manganese zinc ferrite (MnZnFe2O4) and Nickel zinc ferrite (NiZnFe2O4) in the bio-convective flow of motile gyrotactic microorganisms subject to Darcy Forchheimer medium. The effect of activation energy has also been taken into account. Mathematical treatment is carried out via MATLAB software. The use of MnZnFe2O4 - NiZnFe2O4/H2O exhibits improved thermal... 

Nanofluids have a crucial rule in augmentation of the heat transfer in several energy systems. Also, the whirling constituents of micropolar fluid have many practical employments in modern engineering and technology. The concerned work investigates the novel features of micropolar and nanoparticles’ flow over a stretching cone under the Darcy–Forchheimer and chemical reaction effects. Our analysis covers the features of three types (Cu, Al2O3, and TiO2) on ethylene glycol-based nanofluids. The pertinence and importance of Darcy–Forchheimer flows can be found in large spectrum of engineering mechanisms like solar absorption and filtration, drainage problems, solar cells, ground stream... 

In this paper, we consider a dual-sourcing model with constant demand and stochastic lead times. Two suppliers may be different in terms of purchasing prices and lead-time parameters. The ordering takes place when the inventory level depletes to a reorder level, and the order is split among two suppliers. Unlike previous works in the order splitting literature, the supply lead time between vendor and buyer as well as unit purchasing prices is considered to be order quantity dependent. The proposed model finds out the optimal reorder point, order quantity and splitting proportion, using a solution procedure. Numerical results show that neglecting the relationship between ordering batch size... 

Adsorption of human serum proteins (Albumin and total protein) onto high purity synthesis nano-hydroxyapatite (HA), Ca 10(PO 4) 6(OH) 2, has been studied in a wide temperature range by UV-visible spectrophotometer. Adsorption isotherm is basically important to describe how solutes interact with adsorbent, andiscriticalinoptimizing the use of adsorbent. Inthe present study, the experimental results werefitted tothe Langmuir, Freundlich, Temkin and Dubinin-Radushkevich (DR) models to obtain the characteristic parameters of each model and square of the correlation coefficients (R 2). According to the results, the DR isotherm model had the best agreement with the experimental data. The effect of... 

A 1-D heterogeneous model of sorption-enhanced steam methane reforming (SE-SMR) process in a packed bed reactor consisting of nickel catalyst well mixed with CO2 sorbent particles is investigated for three types of common sorbents. The performance of SE-SMR process is studied under low medium pressure conditions (3 – 11 bar) to find the optimum operating conditions. Optimal CaO sorption corresponding to 82% CH4 conversion and 85% H2 purity is found at 900 K, 3 bar, 3.5 kgm−2s−1 and S/C of 3.0. In contrast, lithium zirconate (LZC) and hydrotalcite (HTC) sorbents exhibited best sorptions under the operating conditions of 773 K, 5 bar and S/C of 3 with CH4 conversion of 91.3% and 55.2%, and H2...