Sharif Digital Repository

PM10 prediction has attracted special legislative and scientific attention due to its harmful effects on human health. Statistical techniques have the potential for high-accuracy PM10 prediction and accordingly, previous studies on statistical methods for temporal, spatial and spatio-temporal prediction of PM10 are reviewed and discussed in this paper. A review of previous studies demonstrates that Support Vector Machines, Artificial Neural Networks and hybrid techniques show promise for suitable temporal PM10 prediction. A review of the spatial predictions of PM10 shows that the LUR (Land Use Regression) approach has been successfully utilized for spatial prediction of PM10 in urban areas.... 

In this study, the importance of air temperature from different aspects (e. g., human and plant health, ecological and environmental processes, urban planning, and modelling) is presented in detail, and the major factors affecting air temperature in urban areas are introduced. Given the importance of air temperature, and the necessity of developing high-resolution spatio-temporal air-temperature maps, this paper categorizes the existing approaches for air temperature estimation into three categories (interpolation, regression, and simulation approaches) and reviews them. This paper focuses on high-resolution air temperature mapping in urban areas, which is difficult due to strong... 

Flow movement in unsaturated soil can be expressed by a partial differential equation, named Richards equation. The objective of this study is the finding of an appropriate implicit numerical solution for head based Richards equation. Some of the well known finite difference schemes (fully implicit, Crank Nicolson and Runge-Kutta) have been utilized in this study. In addition, the effects of different approximations of moisture capacity function, convergence criteria and time stepping methods were evaluated. Two different infiltration problems were solved to investigate the performance of different schemes. These problems include of vertical water flow in a wet and very dry soils. The... 

In this study, a minimum distance classification and forward feature selection technique are joined to determine the relationship between weather conditions and the increase of the risk of type A acute aortic dissection (AAD) events in Berlin. The results demonstrate that changes in the amount of cloudiness and air temperature are the most representative weather predictors among the studied parameters. A discrimination surface was developed for the prediction of AAD events 6 h ahead, and it is found that, under a specific amount of cloudiness and air temperature, the risk of AAD events in Berlin increases about 20 %. © 2015, ISB  

In this study, a minimum distance classification and forward feature selection technique are joined to determine the relationship between weather conditions and the increase of the risk of type A acute aortic dissection (AAD) events in Berlin. The results demonstrate that changes in the amount of cloudiness and air temperature are the most representative weather predictors among the studied parameters. A discrimination surface was developed for the prediction of AAD events 6 h ahead, and it is found that, under a specific amount of cloudiness and air temperature, the risk of AAD events in Berlin increases about 20 %  

Surface urban heat island (SUHI) is defined as the elevated land surface temperature (LST) in urban area in comparison with non-urban areas, and it can influence the energy consumption, comfort and health of urban residents. In this study, the existence of daytime SUHI, in Cairo and its new towns during the summer, is investigated using three different approaches; (1) utilization of pre-urbanization observations as LST references; (2) utilization of rural observations as LST references (urban-rural difference); and (3) utilization of the SIUHI (Surface Intra Urban Heat Island) approach. A time series of Landsat TM & ETM+ data (46 images) from 1984 to 2015 was employed in this study for... 

A dense monitoring network is vital for the reliable assessment of PM10 in different parts of an urban area. In this study, a new idea is employed for the re-construction of the 20 shut-down PM10 monitoring stations of Berlin. It endeavours to find the non-linear relationship between the hourly PM10 concentration of both the still operating and the shut-down PM10 monitoring stations by using a fuzzy modelling technique, called modified active learning method (MALM). In addition, the simulations were performed by using not only raw PM10 databases but also log-transformed PM10 databases for skewness reduction. According to the results of hourly PM10 simulation (root mean square error about... 

In this study Active Learning Method (ALM) as a novel fuzzy modeling approach is compared with optimized Support Vector Machine (SVM) using simple Genetic Algorithm (GA), as a well known datadriven model for long term simulation of daily streamflow in Karoon River. The daily discharge data from 1991 to 1996 and from 1996 to 1999 were utilized for training and testing of the models, respectively. Values of the Nash-Sutcliffe, Bias, R 2, MPAE and PTVE of ALM model with 16 fuzzy rules were 0.81, 5.5 m 3 s -1, 0.81, 12.9%, and 1.9%, respectively. Following the same order of parameters, these criteria for optimized SVM model were 0.8, -10.7 m 3 s -1, 0.81, 7.3%, and -3.6%, respectively. The... 

Remotely sensed data inherently contain noise. The development of inverse modelling methods with a low sensitivity to noise is in demand for the estimation of geophysical variables from remotely sensed data. The Active Learning Method (ALM) is well known to have a low sensitivity to noise. For the first time, ALM was utilized for the inversion of radiative transfer calculations with the aim of estimating chlorophyll a (Chl a), coloured dissolved organic matter (CDOM), and suspended particulate matter (SPM) in the Caspian Sea using MERIS (MEdium Resolution Imaging Spectrometer) data. ALM training is straightforward and fast. The ALM inversion models revealed the most relevant variables and... 

Due to the noise that is present in remote sensing data, a robust method to retrieve information is needed. In this study, the active learning method (ALM) is applied to spectral remote sensing reflectance data to retrieve in-water pigment. The heart of the ALM is a fuzzy interpolation method that is called the ink drop spread (IDS). Three datasets (SeaBAM, synthetic and NOMAD) are used for the evaluation of the selected ALM approach. Comparison of the ALM with the ocean colour 4 (OC4) algorithm and the artificial neural network (ANN) algorithm demonstrated the robustness of the ALM approach in retrieval of in-water constituents from remote sensing reflectance data. In addition, the ALM... 

All of the man-made objects and anthropogenic activities related to the oil industries in water bodies (e.g. drilling, equipment installation, construction of oil platfonns and especially oil spillages) have enviromnental impacts on water ecosystems. The assessment of oil field operations and oil platfonns impacts on water quality have become a necessity throughout the world. Phytoplanktons have the lowest trophic level in water enviromnent; therefore the life of all of the other marine animals is highly relevant to phytoplanktonic population. Hence it seems necessary to monitor the spatiotemporal effects of different activities and events, related to oil industries on phytoplanktons.... 

Four 5-, 10-, 20- and 30-story moment frames, representing low-, mid-, and two high-rise structures, were subjected to a great number of idealized directivity pulses. The amplitudes and periods of pulses vary from 0.02 g to 1.0 g and 0.5 to 12 sec, respectively. Over 1400 nonlinear dynamic analyses of low- to high-rise moment frames were performed which were feasible through using modified fish-bone model. The distribution of interstory drift along the height was studied and two applied contours were proposed: (i) the maximum interstory drift contour, and (ii) the critical story contour. These contours were demonstrated versus the ratio of natural period of the structure to the pulse period... 

In this article singular points of a parallel manipulator are obtained based on a novel geometrical method. Here we introduce the constrained plain method (CPM) and some of its application in parallel mechanism. Given the definition of constraint plane (CP) and infinite constraint plane (ICP) the dependency conditions of constraints is achieved with the use of a new theorem based on the Ceva geometrical theorem. The direction of angular velocity of a body is achieved by having three ICPs with the use of another theorem. Finally, with the use of the above two novel theorems singularities of the 3UPF_PU mechanism are obtained. It should be emphasized that this method is completely geometrical,... 

An analytical model is proposed to study the effect of particle size on melting enthalpy and entropy of metallic nanoparticles (NPs). The Mott's and Regel's equations for melting entropy in the combination of core average coordination number (CAC) and surface average coordination number (SAC) of freestanding NPs are considered. Clusters of icosahedral (IC), body centered cubic (BCC), and body centered tetragonal (BCT) structure without any vacancies and defects are modeled. Using the variable coordination number made this model to be in good agreement with experimental and molecular dynamic (MD) results of different crystal structures. The model predicts melting entropy and enthalpy of... 

Grinding is widely used for manufacturing of components that require fine surface finish and good dimensional accuracy. In this study a thermo-mechanical finite element analysis is conducted to find out how grinding parameters can affect temperature and residual stress distribution in the workpiece. Results of parametric study presented in this work indicate, by carefully selecting the grinding parameters, minimum thermal and mechanical damage can be achieved. Higher workpiece velocities produce higher surface residual stress. By increasing depths of cut, depth of tensile residual stresses increases. Convection heat coefficient does not have any considerable effect on surface residual stress... 

Adaptive Noise Cancellation (ANC) is a well-known technique for background noise reduction in automobile and vehicular environments. The noise fields in automobile and other vehicle interior obey the diffuse noise field model closely. On the other hand, the ANC does not provide sufficient noise reduction in the diffuse noise fields. In this paper, a new multistage post-filter is designed for ANC as a solution to diffuse noise conditions. The designed post-filter is a single channel Linear Prediction (LP) based speech enhancement system. The LP is performed by an adaptive lattice filter and attempts to extract speech components by using intermediate ANC signals. The post-filter has no... 

Shot peening is widely used to improve the fretting fatigue strength of critical surfaces. Fretting fatigue occurs in contacting parts that are subjected to fluctuating loads and sliding movements at the same time. This paper presents a sequential finite element simulation to investigate the shot peening effects on normal stress, shear stress, bulk stress and slip amplitude, which are considered to be the controlling parameters of fretting damage. The results demonstrated that among the modifications related to shot peening, compressive residual stress has a dominant effect on the fretting parameters  

One-dimensional (1D) MgO structures were successfully synthesized via carbothermic reduction of mechanically activated mixture of MgO and graphite. Mechanical activation of source materials before carbothermic reduction can substantially enhance the formation of MgO products at a temperature (1000 °C) relatively lower than that required in previous approaches (≥1200 °C). However, the morphology of MgO formed is dependent on the degree of mechanical activation and the condition of the subsequent carbothermic reduction. Two distinctive morphologies were found for MgO products synthesized using our method: single crystalline nanorods with rectangular cross-sections whose diameters range from 50... 

Attitude and vibration control of a general form of flexible satellites is addressed in this paper. Partial differential dynamic equations are derived considering new details such as multi sectioned solar panels and elastic connections between main hub and solar panels. Boundary control approach is adopted to eliminate simplification errors of discrete models, using just one actuator in the hub. Asymptotic stability of attitude dynamics is proved for a group of boundary controllers and necessary conditions for asymptotic stability of vibrations are discussed. Being independent of modeling accuracy and using easily measurable feedbacks are among advantages of the proposed class of... 

Characterization and calcination behavior of a low-grade manganese ore, as a part of Mn ferroalloys production, was studied by XRF, ex-situ XRD, in-situ XRD, and SEM-EDS techniques. Calcination experiments were carried out at and up to 900 °C (1173 K) in air and argon atmospheres. The samples were in particles and powder forms. The results indicated that both quartz and calcite phases in the ore exhibit a bimodal spatial distribution; as relatively large regions and finely distributed in the Mn- and Fe-containing phases. By Rietveld analysis of the in-situ XRD data, the reactions occurring upon heating during the calcination process were deduced. Thermal decomposition and reactive diffusion...