Sharif Digital Repository

Many Investigations have been carried out on high work hardening, strengthening and secondary hardening of MP35N superalloy. In this study, behavior of MP35N under uniaxial hot compression at 600 °C with true strain of 0.05, 0.10, 0.16 and 0.22 was investigated. After calculating on stress- true strain curve, work hardening rate versus strain come out. Serrated flow has been seen in all mentioned strains. In TEM investigation on these samples, dislocations array with extended faults and micro twinning have been seen. According to Suzuki mechanism with solute partitioning and diffusion of solute, stacking fault extended. Uninterrupted separations and combinations of partial dislocations lead... 

In recent years, because of power system restructuring and load growth, much of transmission lines are reaching to their maximum capacity. Therefore, it is so essential to upgrade existing transmission system. However, constructing new lines is a very expensive and time consuming method. Dynamic thermal rating of overhead line is an alternative solution for upgrading transmission system capacity. In this method, allowable current capability of line in the next duration is calculated according to the environmental conditions. A method should be developed to perfectly model these environmental changes. Fuzzy method is a powerful tool that models uncertainties and measurement errors in a simple... 

The present paper proposes a micromechanical damage model for two and three dimensional Representative Volume Element (RVE) with randomly distributed cohesive rough slit-like and penny-shaped micro cracks (Barenblatt-Dugdale type). First, the influence of crack roughness on the crack opening under macro hydrostatic stress state is studied and then the energy release contribution to material damage process is estimated. Considering the fractality of the crack trajectories yields to lower values of the volume crack opening. This will result in lower energy release rate in RVE and higher levels of material resistance. Based on the energy release rate of RVE, the effective material properties... 

Since expansion of communication technology, telecommuting has gained attention from transportation planners as an approach in field of demand management. In this research, joint effects of feasibility of telecommuting for the employees of each organization and the relevant frequency of employees have been evaluated by using the copula model as the most recent conventional way of developing a joint model since the last few years. The result of telecommuting acceptance is that after presenting the project to each organization, the head employer measures the appropriateness of the project for employees and if he reaches a consensus on the success of the project, the employees get involved and... 

The sustainable development in societies and the global energy challenge requires usage of clean energy systems that have attracted the attention of many researchers in recent decades. One of the major challenges in generating renewable resources is the problem of energy storage and imbalance between supply and demand cycles. Hydrogen as one of the clean energy carriers and due to having the highest energy density in terms of weight, is one of the important research topics. From this point of view, the preparation of electrocatalysts for hydrogen production, based on available materials, via simple and environmentally friendly production methods, was considered in this research.... 

Few years ago, when people were talking about image sensors, the minds were automatically focusing on the pictures and photos that were/are taken for recording the memories. Nowadays, however, image sensors have prominent and unbelievable role in different aspects of our life, which "image" is only representing part of this role. A wide variety of applications image sensors can be enumerated such as, Scientific, security, medical, machine vision, ITs, biometrics, automotive, etc. To evaluate the quality of an image sensor, there are different parameters, from the dynamic range, high resolution and suitable speed to low noise, low power consumption and other parameters. The art of companies... 

Long Term Evolution (LTE) aims the peak data rates in excess of 300 Mb/s, which may appear to be challenging to achieve due to the existence of some blocks such as the turbo decoder. One efficient approach to achieve this throughput is by parallelizing the Log Maximum a Posteriori (MAP) algorithm in the turbo decoder. In fact, the interleaver is known to be a major challenging part of the turbo decoder due to its need to the parallel interleaved memory access. LTE uses Quadratic Permutation Polynomial (QPP) interleaver, which makes it suitable for the parallel decoding. In this thesis, first, we propose an efficient architecture for the QPP interleaver, called the Add-Compare-Select (ACS)... 

Nowadays, the inside needle capillary adsorption trap (INCAT) technique as a solventless sample preparation approach and alternative extraction method derived from SPME is gaining rising attentions. The INCAT and needle-trap devices are inexpensive, robust, reusable, and are applicable for sampling and analyzing suitable organic compounds from many different sample matrices. Compared to the fragile silica-based SPME fiber, the needle device is nearly impossible to break mechanically. In addition, the extraction medium possesses quite a large extraction phase volume and a powerful preconcentration capability. Similar to SPME, needle-like devices are particularly convenient for automation and...