Sharif Digital Repository

In this study, the heat transfer and fluid flow characteristics of a three-dimensional microchannel that is partially filled with a layer of porous medium at its bottom solid wall is investigated. The microchannel is consisted of a clear fluid flow region, solid walls and a porous layer that is attached to its solid bottom wall. A constant heat flux is applied to the bottom wall of the microchannel. Darcy-Brinkman-Forchheimer model is used to simulate the fluid flow inside the porous medium. The novelty of this work is to investigate thoroughly and precisely the effect of using of porous layer configuration in MCHSs on hydraulic and thermal performances. The effect of porous layer thickness,... 

In this study, a detailed numerical analysis of the fluid flow and heat transfer of a three-dimensional microchannel is performed to evaluate the effect of using periodic vertical porous and solid ribs with various geometrical shapes, including rectangular, elliptical, isosceles triangular, backward triangular and forward triangular on the walls of this microchannel. Darcy-Brinkman-Forchheimer equations are used to model transport through the porous medium. The results for microchannels with solid ribs and with porous ribs are compared to each other. It is found that at the lowest studied inlet velocity (uin=0.25m/s), for the rib heights of Hr=0.025mm,0.05mmand0.07mm, the average Nusselt... 

In this article, the thermal and hydraulic capacity of a rectangular microchannel heat sink with different trapezoidal porous configuration’s inlet heights (Formula presented.) and outlet heights (Formula presented.) are examined. A three-dimensional model is used for microchannels with miscellaneous trapezoidal porous configuration’s inlet and outlet heights, and the laminar fluid flow and conjugate heat transfer equations are numerically solved. Darcy-Brinkmen-Forchheimer equation is utilized for transport through the porous region. For microchannels with miscellaneous porous distribution’s inlet and outlet heights, the Nusselt number, pressure drop and figure of merit (FOM), a criterion... 

Accurate knowledge of pure hydrocarbon and natural gas viscosity is essential for reliable reservoir characterization and simulation as well as economic design of natural gas processing and transport units. The most trustable sources of pure hydrocarbon and natural gas viscosity values are laboratory experiments. When there is no available experimental data for the required composition, pressure, and temperature conditions, the use of predictive methods becomes important. In this communication, a novel approach was proposed to develop for prediction of viscosity of pure hydrocarbons as well as gas mixtures containing heavy hydrocarbon components and impurities such as carbon dioxide,... 

Vulnerability of power electronic converters in DC microgrids in case of fault occurrence in DC cables necessitates using a fast fault detection and isolation scheme. In this paper, a modified, fast and selective protection scheme has been presented, which provides the required tripping of low voltage DC (LVDC) microgrids. This protection scheme has been developed based on the natural characteristics of the fault current, in which the first and second derivatives of the fault current have been employed to define thresholds for discriminating between faulted and non-faulted situations. To enhance fault detection capability of the protection scheme, definition of thresholds have been improved... 

This is the first research on the frequency analysis of a graphene nanoplatelet composite (GPLRC) microdisk in the framework of a numerical-based generalized differential quadrature method. The stresses and strains are obtained using the higher-order shear deformable theory. Rule of mixture is employed to obtain varying mass density, thermal expansion, and Poisson’s ratio, while module of elasticity is computed by modified Halpin–Tsai model. Governing equations and boundary conditions of the GPLRC microdisk covered with piezoelectric layer are obtained by implementing Hamilton’s principle. Regarding perfect bonding between the piezoelectric layer and core, the compatibility conditions are... 

In this research, electrically characteristics of a graphene nanoplatelet (GPL)-reinforced composite (GPLRC) microdisk are explored using generalized differential quadrature method. Also, the current microstructure is coupled with a piezoelectric actuator (PIAC). The extended form of Halpin–Tsai micromechanics is used to acquire the elasticity of the structure, whereas the variation of thermal expansion, Poisson’s ratio, and density through the thickness direction is determined by the rule of mixtures. Hamilton’s principle is implemented to establish governing equations and associated boundary conditions of the GPLRC microdisk joint with PIAC. The compatibility conditions are satisfied by... 

In this research, electrically characteristics of a graphene nanoplatelet (GPL)-reinforced composite (GPLRC) microdisk are explored using generalized differential quadrature method. Also, the current microstructure is coupled with a piezoelectric actuator (PIAC). The extended form of Halpin–Tsai micromechanics is used to acquire the elasticity of the structure, whereas the variation of thermal expansion, Poisson’s ratio, and density through the thickness direction is determined by the rule of mixtures. Hamilton’s principle is implemented to establish governing equations and associated boundary conditions of the GPLRC microdisk joint with PIAC. The compatibility conditions are satisfied by... 

Permeability as a fundamental reservoir property plays a key role in reserve estimation, numerical reservoir simulation, reservoir engineering calculations, drilling planning, and mapping reservoir quality. In heterogeneous reservoir, due to complexity, natural heterogeneity, non-uniformity, and non-linearity in parameters, prediction of permeability is not straightforward. To ease this problem, a novel mathematical robust model has been proposed to predict the permeability in heterogeneous carbonate reservoirs. To this end, a fairly new soft computing method, namely least square support vector machine (LSSVM) modeling optimized with coupled simulated annealing (CSA) optimization technique... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite...