Sharif Digital Repository

In this paper, we propose an analytical approach to compute the probability of connectivity for one-dimensional ad hoc networks. The proposed analysis gives the exact probability of connectivity for an arbitrary distribution of nodes, provided that nodes are independently and identically distributed. We conduct separate analyses for two cases; in the first case, the number of nodes varies by time under a stationary distribution and in the second case, there is a fixed (known) number of nodes in the network. Using the approaches presented in this work, we are able to derive closed-form formulas for the probability of connectivity for some spatial distributions, while for more complicated... 

Nanodiamond-graphite (NDG) decorated with Ag nanoparticles (AgNPs-NDG) was prepared and used to construct a novel sensitive sensor for the voltammetric determination of thioridazine (TR). The results indicate a remarkable increase in the oxidation peak currents together with a negative shift in the oxidation peak potentials, in comparison to the bare pyrolytic graphite electrode. Remarkable enhancement in microscopic area of the electrode along with strong adsorption of TR on the surface of the modified electrode resulted in a considerable increase in the peak current of TR. The surface morphology and the nature of the composite film deposited on PGE were characterized by scanning electron... 

A glassy carbon electrode (GCE) is modified with platinum nanoparticle (PtNPs) decorated multiwalled carbon nanotube (MWCNT). The modified electrode is applied for the determination of ceftriaxone (CFX) in the presence of lidocaine. Different methods were used to characterize the surface morphology of the modified electrode. The electrochemical behavior of CFX was investigated at GCE, MWCNT/GCE and PtNPs/MWCNT/GCE. A factorial-based response-surface methodology was used to find out the optimum conditions with minimum number of experiments. Under the optimized conditions, oxidation peak currents increased linearly with CFX concentration in the range of 0.01-10.00 μM with a detection limit of... 

A novel ultrasensitive modified electrode was fabricated with a graphene nanosheets and carbon nanospheres (GNS-CNS)-based nanocomposite film as a powerful platform. Pt nanoparticles (PtNPs) were simply electrodeposited onto the GNS-CNS-coated glassy carbon electrode creating a PtNPs/GNS-CNS hybrid nanocomposite modified electrode. Scanning electron microscopy, energy dispersive X-ray spectroscopy and linear sweep voltammetry (LSV) techniques were used for the characterization of the prepared modified electrode. The results of investigation of electrochemical response characteristics of cefepime (CP) revealed a considerable improvement in the oxidation peak current of CP on PtNPs/GNS-CNS/GCE... 

The catalytic wet peroxide oxidation (CWPO) of phenol with activated carbon (AC) as the catalyst has been successfully tested in a novel type of two-impinging-jets reactor (TIJR). The TIJR is characterized by a high-intensity reaction chamber, which is separated by a perforated plate from other parts of the reactor. The perforated plate was used as a filter to keep the catalyst particles within the reaction chamber. The influences of various operating and design parameters such as jet Reynolds number, feed flow rate, internozzle distance, and the jet diameter on the performance capability of the TIJR were investigated. As a result of the impinging process, turbulence, complex trajectory of... 

The wake and internal waves of a moving three dimensional (3D) airfoil body in a stratified fluid has been investigated in a large stratified tank with a finite depth using movies of shadowgraphs of the flow fields. Typical Reynolds and Froude numbers of the flow varied between 103 and 104, and 0.3 and 2 respectively. The flows are generated often by towing the body in a uniformly stratified flow, while limited cases are carried out with body stationary and the channel was in recirculating mode. For some experiments the density profile had a stepped like shape. The wake flow is often consisted of internal waves including random and coherent ones. Distortion of density fields was also... 

In this present study, Tungsten Inert Gas (TIG) welding and powder filled cored wires with nitrogen shielding gas were utilized to produce TiC and TiN surface composite coatings on the titanium (Ti) sheet substrate. The TIG procedure was done at same welding parameters for all of prepared samples. Phase analysis and microstructures were done by X-ray Diffraction (XRD), Energy-Dispersive X-ray Spectroscopy (EDS), Optical Microscopy (OM) and Scanning Electron Microscopy (SEM). The obtained results from XRD and EDS demonstrated that the presence of crystalline phases of TiC, TiN and Ti. SEM and OM exhibited formation of the spherical and dendritic TiC particles in a martensitic matrix and also,... 

Using CNG as an additive for gasoline is a proper choice due to higher octane number of CNG enriched gasoline with respect to that of gasoline. As a result, it is possible to use gasoline with lower octane number in the engine. This would also mean the increase of compression ratio in SI engines resulting in higher performance and lower gasoline consumption. Over the years, the use of simulation codes to model the thermodynamic cycle of an internal combustion engine have developed tools for more efficient engine designs and fuel combustion. In this study, a thermodynamic cycle simulation of a conventional four-stroke spark-ignition engine has been developed. The model is used to study the... 

With the declining energy resources and increase of pollutant emissions, a great deal of efforts has been focused on the development of alternatives for fossil fuels. One of the promising alternative fuels to gasoline in the internal combustion engine is natural gas [1-5]. The application of natural gas in current internal combustion engines is realistic due to its many benefits. The higher thermal efficiency due to the higher octane value and lower exhaust emissions including CO2 as a result of the lower carbon to hydrogen ratio of the fuel are the two important feature of using CNG as an alternative fuel. It is well known that computer simulation codes are valuable economically as a cost... 

Gaining insight into possible vibratory responses of dynamical systems around their stable equilibria is an essential step, which must be taken before their design and application. The results of such a study can significantly help prevent instability in closed-loop stabilized systems by avoiding the excitation of the system in the neighborhood of its resonance. This paper investigates nonlinear oscillations of a rotary inverted pendulum (RIP) with a full-state feedback controller. Lagrange’s equations are employed to derive an accurate 2-DoF mathematical model, whose parameter values are extracted by both the measurement and 3D modeling of the real system components. Although the governing... 

Surface integrity is one of the important parameters affecting the quality and functionality of mechanical components. This paper presents an investigation on effect of drilling parameter on the surface integrity of Inconel 718 through a combination of experimental and simulation works. The machining responses that are determined through the experimental work include microhardness, microstructure changes, and surface roughness. The average grain size of the microstructure of the workpiece is estimated by using a simulation model. The experimental and simulation results show that higher spindle speed facilitates the formation of white layer near the machined surface and decreases the average... 

Project scheduling to maximize the net present value of the cash flows has been a topic of recent research. These researches assume that the duration of activities is known either with certitude or at least with some probability. However, in many applications the structure of the duration of activities is imprecise. In this paper, the project scheduling problem with discounted cash flows under fuzzy environment is considered. The duration of activities are assumed triangular fuzzy numbers. The derived mathematical model is a multi-objective non-linear programming model and for solving it the Taylor expansion is used to transform the objective function to a linear form. To interpret the fuzzy... 

As the infrastructure-centric model of peer-to-peer streaming, recent overlay construction schemes compose a hierarchical topology of peers by grouping them into clusters. There is a server in each cluster that receives data from the source and relays it to its cluster members. In this paper, we propose an alternative infrastructure-centric peer-to-peer framework called BAHMO that constructs a hierarchical multicast tree. BAHMO does not utilize server bandwidth and rely only on peer bandwidth for data transfers. It achieves both the stability of the infrastructure-centric model and the bandwidth efficiency of the fully-distributed model. Bandwidth assignment for inter-cluster data transfers... 

In this paper a wave approach has been introduced to study the performance of a distributed amplifier. The time domain response of a FET is obtained by means of the fully distributed model. By applying the procedure to a pi-gate GaAs MESFET, the S matrix is computed from time domain results over a frequency range of 2-20 GHz. Scattering parameters of gate and drain lines are extracted from three-dimensional FDTD simulation. The result obtained by this wave approach is compared with device lumped model and Quasi static approach of transmission line. © 2007 IEEE  

PbCO 3·PbO and PbCO 3·2PbO compounds were prepared by thermal methods. The structure of each compound was determined by using XRD technique, and their purity was confirmed by analytical methods (98%). Also the thermal characteristics of each compound were investigated by thermogravimetry. At 600°C both compounds decompose completely and produce lead(II) oxide. © 2006 Nauka/Interperiodica  

A suction-controlled ring device has been developed to continuously measure the coefficient of lateral soil pressure in deformable unsaturated soil samples from the at-rest to the active condition under application of increasing vertical pressure and controlled matric suction. The device incorporates a thin aluminum specimen ring equipped with horizontal strain gages for recording the lateral soil strains. In addition, a sensor recording water volume changes is utilized to continuously monitor the degree of saturation of the soil sample during tests. The matric suction within the soil texture is controlled using the axis translation technique. In order to verify the performance of the ring... 

We introduce a new smooth, non-toxic, biocompatible method for cross-linking of gum tragacanth (GT), a polysaccharide of natural origin, in order to serve as a new supporting matrix for immobilization systems. The modified gum is used as a matrix for the catalysis of the conversion of benzyl penicillin to 6-aminopenicillanic acid (6-APA) by means of Escherichia coli ATCC11105 with penicillin G acylase (PGA) activity. The results show that GT beads can not only serve as a proper matrix for immobilization, but show enhanced hydrolysis rate and stability compared to other immobilization systems used for this reaction. This signifies the potential of GT as a biocompatible matrix for... 

The Class-E power amplifier has been widely studied and formulated in the literature. Although the majority of reported inductive coupling wireless power transfer (WPT) systems use a class-E power amplifier for driving the primary coil, still there is a lack of a comprehensive study on class-E circuit dedicated to WPT, providing a set of closed form design equations for proper class-E operation. This paper presents the required design equations needed to design a 'true' class-E circuit for WPT applications. Equations for the series-tuned secondary coil WPT system are presented, as well as two different design procedures for the parallel-tuned secondary coil. The derived equations have been... 

A novel intelligent semi-active control system for an eleven degrees of freedom passenger car's suspension system using magnetorheological (MR) damper with neuro-fuzzy (NF) control strategy to enhance desired suspension performance is proposed. In comparison with earlier studies, an improvement in problem modeling is made. The proposed method consists of two parts: a fuzzy control strategy to establish an efficient controller to improve ride comfort and road handling (RCH) and an inverse mapping model to estimate the force needed for a semi-active damper. The fuzzy logic rules are extracted based on Sugeno inference engine. The inverse mapping model is based on an artificial neural network...