Sharif Digital Repository

In this paper, we propose an analytical approach to compute the probability of connectivity for one-dimensional ad hoc networks. The proposed analysis gives the exact probability of connectivity for an arbitrary distribution of nodes, provided that nodes are independently and identically distributed. We conduct separate analyses for two cases; in the first case, the number of nodes varies by time under a stationary distribution and in the second case, there is a fixed (known) number of nodes in the network. Using the approaches presented in this work, we are able to derive closed-form formulas for the probability of connectivity for some spatial distributions, while for more complicated... 

Nanodiamond-graphite (NDG) decorated with Ag nanoparticles (AgNPs-NDG) was prepared and used to construct a novel sensitive sensor for the voltammetric determination of thioridazine (TR). The results indicate a remarkable increase in the oxidation peak currents together with a negative shift in the oxidation peak potentials, in comparison to the bare pyrolytic graphite electrode. Remarkable enhancement in microscopic area of the electrode along with strong adsorption of TR on the surface of the modified electrode resulted in a considerable increase in the peak current of TR. The surface morphology and the nature of the composite film deposited on PGE were characterized by scanning electron... 

A glassy carbon electrode (GCE) is modified with platinum nanoparticle (PtNPs) decorated multiwalled carbon nanotube (MWCNT). The modified electrode is applied for the determination of ceftriaxone (CFX) in the presence of lidocaine. Different methods were used to characterize the surface morphology of the modified electrode. The electrochemical behavior of CFX was investigated at GCE, MWCNT/GCE and PtNPs/MWCNT/GCE. A factorial-based response-surface methodology was used to find out the optimum conditions with minimum number of experiments. Under the optimized conditions, oxidation peak currents increased linearly with CFX concentration in the range of 0.01-10.00 μM with a detection limit of... 

A novel ultrasensitive modified electrode was fabricated with a graphene nanosheets and carbon nanospheres (GNS-CNS)-based nanocomposite film as a powerful platform. Pt nanoparticles (PtNPs) were simply electrodeposited onto the GNS-CNS-coated glassy carbon electrode creating a PtNPs/GNS-CNS hybrid nanocomposite modified electrode. Scanning electron microscopy, energy dispersive X-ray spectroscopy and linear sweep voltammetry (LSV) techniques were used for the characterization of the prepared modified electrode. The results of investigation of electrochemical response characteristics of cefepime (CP) revealed a considerable improvement in the oxidation peak current of CP on PtNPs/GNS-CNS/GCE... 

Wall walking robots are designed for different purposes, rescue operations, wall inspections and jobs such as painting and cleaning and fire fighting for tall buildings. These are some cases that these types of robots are extensively used. This paper describes a design of a new serial mechanism for wall climbing job. In deed we are seeking to define a minimum degree of freedom mechanism to be applied in a robot moving vertically on a surface. This mechanism has 5 links, but at any point it works with its 4 links, actually in each cycle of motion the linkage will be interchanged. Copyright © 2006 by ASME  

Orthogonal frequency division multiplexing (OFDM) has a large peak to mean envelope power ratio (PMEPR), which can result in significant signal distortion in presence of nonlinear amplifiers. In this paper, we will show that peak of the continuous envelope of OFDM signal can be bounded by maximum of corresponding oversampled sequence. This fact is then used as the corner stone of our study in two parts. In the first part, statistical analysis is used to find probability upper bound for complementary cumulative distribution function of PMEPR. It is also proven that for large number of subcarriers, only one redundant bit is necessary to limit PMEPR within %10 of its maximum value. In the... 

Recently, the tradeoff between low energy consumption and high fault-tolerance has attracted a lot of attention as a key issue in the design of real-time embedded systems. Dynamic Voltage Scaling (DVS) is known as one of the most effective low energy techniques for real-time systems. It has been observed that the use of control-theoretic methods can improve the effectiveness of DVS-enabled systems. In this paper, we have investigated reducing the energy consumption of fault-tolerant hard real-time systems using feedback control theory. Our proposed feedback-based DVS method makes the system capable of selecting the proper frequency and voltage settings in order to reduce the energy... 

It is widely accepted that the presence of a lossy network, such as a SAW filter or balun, at the input of LNA increases NF of the overall circuit by an amount equal to the insertion loss of the lossy network. In this work it is shown that this idea is not exactly true and it considerably underestimates the overall NF. To verify this claim, Z-model of the lossy network is added before the LNA and the overall noise figure is recalculated for some commonly used LNA topologies. It is shown that in common gate LNA and common source LNA with resistive feedback the accepted equation underestimates the overall NF by 1.3 dB for an insertion loss of 2 dB. In common source with resistive matching and... 

This paper investigates the performance of a MOS track-and-hold circuit as the front end of a wide input range and high-speed single-sided ADC. In order to reduce charge injection and clock feedthrough errors, a new technique for employing a dummy transistor in the bootstrapped switch of the track and hold circuit is introduced. Performance of the proposed circuit for the two cases of constant and non-linear hold capacitor is studied. It is also shown that how and when dummy switch and bulk switching method can improve the accuracy of theT/H. © IEICE 2007  

A divide-by-3 frequency divider for Inphase and Quadrature (I/Q) LO signal generation in a multi-band frequency synthesizer is presented. Using divisor numbers other than powers of 2 (2n) for quadrature signal generation, reduces the required frequency range of the VCO in multi-band frequency synthesizers. The divide-by-3 circuit is designed in a 0.18um CMOS technology. © 2008 IEEE  

In this paper a theoretical comparison between the performance of switched-capacitor (SC) and switched-current (SI) pipeline analog-to-digital converters (ADCs) is presented. Power dissipation and die area of SC and SI implementations are compared based on linearity and noise constraints. It is shown that if nonlinearity errors of the class AB SI ADCs are removed by calibration, their performance prevails that of the SC ADCs. Also it is shown that class AB SI ADCs occupy less die area than SC ADCs for a given resolution. © 2007 IEEE  

A high speed, high resolution switched-current sample and hold (SI S/H) based on a new class AB transconductance stage is presented. Simulations performed on the SI S/H in standard 0.18um CMOS technology with 1.5v supply voltage indicate low power dissipation, high sampling speed and high SNR. © 2006 IEEE  

A new architecture for analog sampled-data filters is presented. This architecture is based on implementing the difference equation of the filter using a neural network. It results in lower sensitivity of filter coefficients to hardware nonidealities. Different tradeoffs in the hardware implementation of the filter are discussed. A design example is also presented. © 2005 IEEE  

This study provides a stochastic dynamic programming model with a Markov chain that explicitly focuses on the customer as well as a new model for valuing the customers in the banking industry. The proposed framework calculates individual customer’s lifetime value dynamically. The study follows a stochastic dynamic programming model that is based on the Markov chain. The deduced findings are illustrated with supplementary context from an outstanding case study. The findings underline the importance of the stochastic model for calculating customer lifetime value based on customer behavior. The presented framework provides a beneficial way for future research and valuable insight for allocating... 

In this paper, we introduce a new bound for the peak of the continuous envelope of an OFDM signal based on the maximum of its corresponding oversampled sequence, that is considerably tighter than the recent results presented in [4]. The proposed bound is then used as the basis of our study in two parts. In the first part, we find an upper bound for the regrowth of the peak of the digitally clipped oversampled sequence after discrete to continuous conversion. We also show that for oversampling rates greater than π/√2, the peak regrowth percentage depends only on oversampling rate, regardless of the number of subcarriers. In the second part, we propose new and tight relative error bounds for... 

Orthogonal frequency-division multiplexing (OFDM) introduces large amplitude variations in time, which can result in significant signal distortion in the presence of nonlinear amplifiers. In this paper, we introduce a new bound for the peak of the continuous envelope of an OFDM signal, based on the maximum of its corresponding oversampled sequence, that is shown to be very tight as the oversampling rate increases. The bound is then used to derive a closed-form probability upper bound for complementary cumulative distribution function of the peak-to-mean envelope power ratio of uncoded OFDM signals for sufficiently large numbers of subcarriers. As another application of the bound for... 

A new architecture for constant-gm rail-to-rail(R-R) input stages is presented that has less than 5% deviation in gm over the entire range of the input common-mode voltage. Furthermore, a new structure for folded cascode amplifier based on the use of a floating current source is presented. Employing these techniques a low-power operational transconductance amplifier(OTA) with 100MHz unity-gain bandwidth, 106dB gain, 60° phase margin, 2.65V swing, and 6.4nVA/√Hz input-referred noise with R-R input common-mode range is realized in a 0.8μm CMOS technology. This amplifier dissipates 10mW from a 3V power supply  

A disaster's response and recovery phases can be characterized by the breadth of activities, complex interrelationships of multiple involved agencies, and uncertain outcomes. Proper performance and collaboration of responsible agencies can mitigate disaster-induced losses. Past studies have not holistically investigated the role of responsible agencies’ operation and cooperation in post-disaster community recovery. This study proposes a hybrid framework that facilitates the probabilistic modeling of responsible agencies' post-disaster performance and coordination. An Agent-based Modeling (ABM) sub-model simulates the operations and interactions of responsible agencies. A System Dynamics (SD)...