Sharif Digital Repository

Veronica genus (Plantaginaceae) is broadly distributed in different habitats. In this study, the inhibitory activity of free soluble and conjugated phenolic extracts of Veronica persica on key enzymes associated to type 2 diabetes (α-glucosidase and α-amylase) and hypertension (angiotensin I converting enzyme, ACE) was assessed, as well as their antioxidant power. Our results showed that both the extracts inhibited α-amylase, α-glucosidase and ACE in a dose-dependent manner. In particular, free phenolic extract significantly (P < 0.05) inhibited α-glucosidase (IC50 532.97 μg/mL), whereas conjugated phenolic extract significantly (P < 0.05) inhibited a-amylase (IC50 489.73 μg/mL) and ACE... 

Lithium ion batteries as one of the most important energy storage equipments, have several challenges including capacity drop as number of cycles increases. Cathode particle coating is an effective approach in improvement of electrochemical performance of the batteries. In this study, TiO2-Ag coating was used to improve NCM cathode performance. The microstructure and crystal structure properties of coated NCMs were evaluated by the FE-SEM and XRD. Electrochemical behavior of the batteries was investigated by cycling performance analysis and EIS. TiO2 coating was deposited as a uniform layer and Ag coating was precipitated as dispersed nanoparticles. The results shows that using of TiO2-Ag... 

Anti-reflection and self-cleaning coatings on the glass substrate are used to improve the performance of solar systems. TiO2 are one of the most used semiconductors for this application. In this research meso-porous TiO2 coatings (that synthesized by the sol-gel process) with the various extent of porosity (using different concentrations of Pluronic F127, as pore-forming agent) have been investigated. The coating's thickness and porosity and anti-reflective properties were studied by FE-SEM and UV/VIS spectrometer (transmission spectra test), respectively. It was found that the use of F127 leads to the formation of pores smaller than 30 nm and increases the surface roughness from 1.5 (for... 

An efficient algorithm for the design optimization of the compressible fluid flow problem through a flexible structure is presented. The methodology has three essential parts: first the behavior of compressible flow in a supersonic diffuser was studied numerically in quasi-one-dimensional form using a flux splitting method. Second, a fully coupled sequential iterative procedure was used to solve the steady state aeroelastic problem of a flexible wall diffuser. Finally, a robust Genetic Algorithm was implemented and used to calculate the optimum shape of the flexible wall diffuser for a prescribed pressure distribution. © 2006 Elsevier Ltd. All rights reserved  

Needle insertion simulation and planning systems (SPSs) will play an important role in diminishing inappropriate insertions into soft tissues and resultant complications. Difficulties in SPS development are due in large part to the computational requirements of the extensive calculations in finite element (FE) models of tissue. For clinical feasibility, the computational speed of SPSs must be improved. At the same time, a realistic model of tissue properties that reflects large and velocity-dependent deformations must be employed. The purpose of this study is to address the aforementioned difficulties by presenting a cost-effective SPS platform for needle insertions into the liver. The study... 

In this paper, we study a variation of the equations of a chemotaxis kinetic model and investigate it in one dimension. In fact, we use fractional diffusion for the chemoattractant in the Othmar-Dunbar-Alt system (Othmer in J Math Biol 26(3):263-298, 1988). This version was exhibited in Calvez in Amer Math Soc, pp 45-62, 2007 for the macroscopic well-known Keller-Segel model in all space dimensions. These two macroscopic and kinetic models are related as mentioned in Bournaveas, Ann Inst H Poincaré Anal Non Linéaire, 26(5):1871-1895, 2009, Chalub, Math Models Methods Appl Sci, 16(7 suppl):1173-1197, 2006, Chalub, Monatsh Math, 142(1-2):123-141, 2004, Chalub, Port Math (NS), 63(2):227-250,... 

In this study, the corrosion behaviour of Ni-Co alloys with low Co content, electroplated on steel substrate in sulphate bath, was investigated. The morphology of coatings was studied by optical and SEM microscopy. The corrosion products were analyzed using EDX. The results showed that Ni-1%Co coatings had a better corrosion resistance 0.30, 0.92 and 3.75 mpy for atmospheric, salt spray and polarization tests, respectively. These are 0.41, 1.20 and 5.40 mpy for pure nickel coatings that indicate the least corrosion resistance. Surface analysis revealed the presence of oxides, sulphides and chlorides in corrosion products  

The flight of unmanned aerial vehicles is often associated with model uncertainties, measurement noises, and environmental disturbances such as wind gust. To mitigate these challenges, the accurate estimation of states is vital. Moreover, the wind model and its parameters should also be estimated and compensated during the flight. In this paper, a multiple model filter is implemented for this purpose. To investigate the performance of the multiple model filter, three different models including constant wind, '1-cosine' model and wind shear model are considered. The multiple model filter utilizes three extended Kalman filter to simultaneously estimate the model of wind, the parameters of the... 

Nowadays, the number of digital images has increased so that the management of this volume of data needs an efficient system for browsing, categorising and searching. Automatic image annotation is designed for assigning tags to images for more accurate retrieval. Non-negative matrix factorisation (NMF) is a traditional machine learning technique for decomposing a matrix into a set of basis and coefficients under the non-negative constraints. In this study, the authors propose a two-step algorithm for designing an automatic image annotation system that employs the NMF framework for its first step and a variant of K-nearest neighbourhood as its second step. In the first step, a new multimodal... 

In this paper, a new nonlinear robust adaptive impedance controller is addressed for Unmanned Aerial Vehicles (UAVs) equipped with a robot manipulator that physically interacts with environment. A UAV equipped with a robot manipulator is a novel system that can perform different tasks instead of human being in dangerous and/or inaccessible environments. The objective of the proposed robust adaptive controller is control of the UAV and its robotic manipulators end-effector impedance in Cartesian space in order to have a stable physical interaction with environment. The proposed controller is robust against parametric uncertainties in the nonlinear dynamics model of the UAV and the robot... 

Gas detectors play an important role in safety of process plants. In-time detection of flammable gas releases may prevent major fire and explosion as well as property loss in process plants. One of the challenges of the gas detection system design is determining the best layout for detectors in order to reduce the risk of gas releases as much as possible. However, current methods do not address the risk concept in placement of detectors quantitatively. A risk-based methodology is proposed for optimal placement of point type flammable gas detectors in which first the risk (defined as a combination of scenario frequency, delayed ignition probability and damage) is estimated for any release... 

A new method for fabrication of silver nano-islands on glass fibers using a top-down process is introduced. A thin layer of silver chemically coated on the surface of the glass fibers evolves into silver islands by heat treatment. The effect of the concentration of the initial solution and the temperature were investigated. Segregation was more clearly observed for lower solution concentrations and higher temperatures. The temperature of 500 °C was found optimum where separated islands form. At higher temperatures, the coagulation and burial of silver islands occur. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and diffused reflectance spectroscopy (DRS) were... 

In automatic image annotation (AIA) different features describe images from different aspects or views. Part of information embedded in some views is common for all views, while other parts are individual and specific. In this paper, we present the Mvg-NMF approach, a multi-view-group non-negative matrix factorization (NMF) method for an AIA system which considers both common and individual factors. The NMF framework discovers a latent space by decomposing data into a set of non-negative basis vectors and coefficients. The views divided into homogeneous groups and latent spaces are extracted for each group. After mapping the test images into these spaces, a unified distance matrix is...