Sharif Digital Repository

A novel recognition method for selective determination of the hyoscine N-Butyl bromide (HBB), an antispasmodic agent for smooth muscles, was devised using extended gate field-effect transistor (EG-FET) as transducing unit. For this purpose a PVC membrane, containing hyoscine n-butyl-tetraphenyl borate ion-pair as recognition component, was coated on Ag/AgCl wire, which was connected to the extended metal gate. In optimal conditions, the linear range for HBB was 10-8-10-5 molL−1 with limit of detection 1.7×10-9 molL-1. The proposed sensor was applied in real sample, it showed fast response with high accuracy, and therefore it could be used as HPLC detector in the pharmaceutical samples in... 

This study aimed to preconcentration of sulfamethoxazole (SMX) in water and biological samples. Ultrasound-assisted dispersive liquid-liquid microextraction (UA-DLLME) and ultrasound-assisted dispersive solid-phase microextraction (UA-DSPME) methods paired with spectrophotometry were applied to extraction and preconcentration of SMX. ZnFe2O4 nanoparticles were prepared as adsorbent in UA-DSPME method by hydrothermal method. The scanning electron microscopy (SEM) technique showed that the adsorbent had symmetrical, bullet-shaped particles with uniform size. The results of the X-ray diffraction (XRD) showed the successful synthesis of the ZnFe2O4 nanoparticles. Effective parameters in... 

This study was designed to compare one-step, two-step and spent medium bioleaching of spent catalyst by adapted Aspergillus niger in batch cultures. Aspergillus niger, which was adapted to heavy metal ions, Ni, Mo, Fe, and W, was grown in medium containing up to 5% (w/v) of spent catalyst. The main lixiviant in bioleaching was gluconic acid, which was produced at all pulp densities in the one-step bioleaching process. Gluconic acid was also produced in the two-step bioleaching process when the spent catalyst was present at pulp densities greater than 1% (w/v). In the spent medium leaching, however, the primary agent was citric acid. The pulp density of the spent catalyst was varied, and this... 

Lake Urmia, which was once the second-largest saline lake in the world, has been shrinking dramatically. Moreover, Lake Urmia has become supersaturated with total salinity averaging more than 350 g/l. Salt precipitation and dissolved materials brought by inflowing rivers have formed a layer of sediment with low hydraulic conductivity on the lakebed. Considering the flat bathymetry of Lake Urmia, we conducted a series of numerical simulation scenarios to study the groundwater flow pattern in the vicinity of the hypersaline Lake Urmia using COMSOL Multiphysics®. In the first step, we performed the simulations in steady-state conditions. Secondly, we simulated the lake level fall in 10 years at... 

Purpose: Drowsy driving accounts for many accidents and has attracted substantial research attention in recent years. Electroencephalography (EEG) signals are shown to be a reliable measure for the early detection of drowsiness. Unfortunately, there is no comprehensive study showing the applicability of drowsiness detection systems with EEG signals. In this research, we targeted the studies under the category of drowsiness detection, which adopted an EEG-based approach, to inspect the applicability of these systems from different aspects. Materials and Methods: We included documented studies that utilized clinical devices and consumer-grade EEG headsets for detection of drowsiness and... 

Investigating the dynamic evolution of storage volume and salinity of Lake Urmia (LU), which is crucial to present more reliable estimations of water balance components, needs to be furthur studied. We aimed to fill this gap by developing a coupled lumped mathematical model that considered the two-way effect of salt and water balance components on each other. Through the coupled water and salt balance model, salt precipitation and dissolution components were incorporated, and vaporation was calculated dynamically based on the lake's salinity. The final model was then used as a tool to estimate the groundwater flux. Results indicated that during the lake shrinkage period (2009–2015),... 

In this study, nanostructured biodegradable pure Zn, Zn-4 wt. % Mn and Zn-24 wt % Mn alloys were produced by 20 h mechanical alloying and consequent cold pressing and sintering. Structural evolutions were investigated using the X-ray diffraction technique. Also, the microstructure was characterized by scanning electron microscopy. The effects of alloy composition on density, mechanical properties, corrosion behavior in Hank's solution, cell viability and cell attachment were investigated. Crystallite size of the synthesized alloys after 20 h of milling reached to less than 40 nm and remained less than 80 nm after consolidation and sintering for 1 h. Alloys contain MnZn13 as second phase... 

N-annulated perylene based materials show outstanding and tunable optical and physical properties, making them suitable to be charge transport materials for optoelectronic applications. However, this type of materials has so far not been well studied in solar cells. Here, we develop a new hole transport material (HTM), namely S5, based on perylene building block terms, for organic-inorganic hybrid perovskite solar cells (PSCs). We have systematically studied the influences of the film thickness of S5 on their photovoltaic performance, and a low concentration of S5 with a thinner HTM film is favorable for obtaining higher solar cell efficiency. S5 shows excellent energy alignment with...