Loading...
Search for: sheikholeslam-noori--m
0.197 seconds

    Phenomenological investigation of drop manipulation using surface acoustic waves

    , Article Microgravity Science and Technology ; Volume 32, Issue 6 , 2020 , Pages 1147-1158 Sheikholeslam Noori, M ; Shams Taleghani, A ; Taeibi Rahni, M ; Sharif University of Technology
    Springer Science and Business Media B.V  2020
    Abstract
    This paper aims at the investigation of acoustic streaming produced by surface acoustic waves (SAWs) in a drop. Computational simulation of acoustofluidic phenomenon, using lattice Boltzmann method (LBM), presenting acoustic applications in flow control, and a relatively complete parametric study are the motivations of this work. For this purpose, a computational fluid dynamics modeling based on multi-relaxation time multi-component multiphase color gradient lattice Boltzmann method was used. The simulations were carried out at wave frequencies ranging from 20 MHz to 271 MHz and wave amplitudes ranging from 0.5 nm to about 350 nm. First, the non-dimensional form of Navier-Stokes equations... 

    Effects of contact angle hysteresis on drop manipulation using surface acoustic waves

    , Article Theoretical and Computational Fluid Dynamics ; Volume 34, Issue 1-2 , 2020 , Pages 145-162 Sheikholeslam Noori, M ; Taeibi Rahni, M ; Shams Taleghani, A ; Sharif University of Technology
    Springer  2020
    Abstract
    Surface acoustic waves have gained much attention in flow control given the effects arising from acoustic streaming. In this study, the hydrodynamic interference of a drop under surface acoustic waves is comprehensively investigated and the contact angle hysteresis effects are considered, too. This paper reveals the effects of some control parameters such as wave amplitude and wave frequency on the dynamical behaviors of drop. For these purposes, a multiple-relaxation-time color-gradient model lattice Boltzmann method is developed. In these case studies, wave frequency and amplitude were in the ranges of 20–60 MHz and 0.5–2 nm, respectively. In addition, the density ratio of 1000, the... 

    Multiple-relaxation time color-gradient lattice Boltzmann model for simulating contact angle in two-phase flows with high density ratio

    , Article European Physical Journal Plus ; Volume 134, Issue 8 , 2019 ; 21905444 (ISSN) Sheikholeslam Noori, S. M ; Taeibi Rahni, M ; Shams Taleghani, S. A ; Sharif University of Technology
    Springer Verlag  2019
    Abstract
    The contact line dynamics is an important phenomenon in natural and industrial processes and is still a challenging problem. The complexity of this problem in computational simulations is much more than theoretical and experimental works. In this paper, a color-gradient (CG) lattice Boltzmann method (LBM) for simulating wetting phenomena and the dynamics of contact line in two-phase flows with very high density-ratio (∼ 1000 was used. This method applies a multi-relaxation time (MRT) collision operator to enhance the stability of numerical scheme. Both static and dynamic contact angles were enforced at the wall through geometrical wetting boundary condition. Note, the main nobility of this... 

    Numerical analysis of droplet motion over a flat plate due to surface acoustic waves

    , Article Microgravity Science and Technology ; Volume 32, Issue 4 , 2020 , Pages 647-660 Sheikholeslam Noori, S. M ; Taeibi Rahni, M ; Shams Taleghani, S. A ; Sharif University of Technology
    Springer  2020
    Abstract
    Micro-scale systems have gained considerable attention in recent years and a large amount of researches have been done in this field. In this study, the hydrodynamic interference of a droplet is comprehensively investigated under surface acoustic waves. This paper reveals the effects of some control parameters such as wave amplitude and wave frequency on the dynamical behavior of droplet. For these purposes, a two-dimensional multiple-relaxation-time color-gradient model lattice Boltzmann method is developed. This model is first validated by dynamical behaviors of a droplet subjected to shear flow. Moreover, displacement of a droplet affected by surface acoustic waves is comprehensively... 

    Computational Simulation of Turbulent Film Cooling, Using RANS/LES Hybrid Approach and Digital Filter Based Interface Boundary Conditions

    , M.Sc. Thesis Sharif University of Technology Sheikholeslam Noori, Mahdi (Author) ; Taeibi-Rahni, Mohammad (Supervisor)
    Abstract
    Nowadays, hybrid LES/RANS approach is being widely used by many researchers. This approach uses the advantages of both LES and RANS approaches simultaneously. Hybrid approach is as accurate as LES, but its cost is much lower. The biggest problem of hybrid approach is transformation of data between RANS and LES regions. Before, precursor simulation and synthetic methods, such as Fourier series and synthetic eddy methods (SEM) have been used extensively to solve such problems. Precursor simulation is expensive, because of high cost of generation of data. On the other hand, Fourier series method is confined to simple geometries, while SEM has problem of programming. Interface condition in this... 

    Numerical Analysis of Drop Motion over a Flat Solid Surface Due to Surface Acoustic Waves, Using Lattice Boltzmann Method

    , M.Sc. Thesis Sharif University of Technology Sheikholeslam Noori, Mahdi (Author) ; Mohammad Taiebi Rahni (Supervisor) ; Shams Taleghani, Arash (Co-Supervisor)
    Abstract
    In recent years, there have been a tremendous research performed in the field of sestems containing small scales. However, besides all advantages of such systems, microfluidic systems have extraordinary difficulties and pumping liquid drops as part of some of these systems has been very important issue. An approach related to flow control is use of surface acoustic waves (SAW), which is known as acoustofluidic device. So far, most researches have only qualitatively investigated acoustic flux phenomenon. On the other hand, computational research is ongoing more emphasizing on accuracy, optimization, and obtaining more detailed physical understanding of SAW applications. Investigation of the... 

    Computational simulation of water removal from a flat plate, using surface acoustic waves

    , Article Wave Motion ; Volume 111 , 2022 ; 01652125 (ISSN) Taeibi Rahni, M ; Shams Taleghani, A ; Sheikholeslam, M ; Ahmadi, G ; Sharif University of Technology
    Elsevier B.V  2022
    Abstract
    Minimization of drop contact time is so important and critical for applications such as self-cleaning and anti-corrosion. In recent years, surface acoustic waves are presented as a powerful method for the manipulation of the drops. In this manuscript, a numerical study of drop shedding under the effect of acoustic waves is presented, which may have potential use in the anti-icing systems. Therefore, the effects of different parameters, such as acoustic wave frequency, amplitude, and direction of the wave on the water removal, are investigated. For this purpose, a color gradient lattice Boltzmann method (LBM) is developed and used in these simulations. The acoustic actuator effect is added as... 

    The linkage of technology strategy and overall strategy of multi business diversified groups: Literature review and theoritical framework

    , Article PICMET '10 - Portland International Center for Management of Engineering and Technology, Proceedings - Technology Management for Global Economic Growth, 18 July 2010 through 22 July 2010, Phuket ; July , 2010 , Pages 22-33 ; 9781890843229 (ISBN) Arasti, M. R ; Khaleghi, M ; Noori, J ; Sharif University of Technology
    2010
    Abstract
    This article deals with technology strategy and its linkage with overall strategy at multi-business, diversified groups. In the last two decades, the alignment of technology and business strategy has been one of the important research fields in strategy and technology management scopes. These researchs has been concentrated on single companies through which different frameworks, models & decision support tools have been developed and widely utilized by industries. Although multi-business and diversified groups play an important role in global and national economics and need a comprehensive and overall plan for the management of their diversified technological assets, there are few researchs... 

    Corporate-level technology strategy and its linkage with corporate strategy in multi-business companies: IKCO case study

    , Article Technological Forecasting and Social Change ; Volume 122 , 2017 , Pages 243-252 ; 00401625 (ISSN) Arasti, M ; Khaleghi, M ; Noori, J ; Sharif University of Technology
    2017
    Abstract
    This article deals with technology strategy and its linkage with overall strategy at multi-business, diversified groups. In the last two decades, the alignment of technology and business strategy has been one of the important research fields in strategy and technology management literature. These researches has been concentrated on single companies through which different frameworks, models, and decision support tools have been developed and widely utilized by industries. Although multi-business and diversified groups play an important role in national economy of developing countries and need a comprehensive and overall plan for the management of their diversified technological capabilities,... 

    Surface acoustic waves as control actuator for drop removal from solid surface

    , Article Fluid Dynamics Research ; Volume 53, Issue 4 , 2021 ; 01695983 (ISSN) Noori, M. S ; Taleghani, A. S ; Rahni, M. T ; Sharif University of Technology
    IOP Publishing Ltd  2021
    Abstract
    Several types of research are performed on flow control and this fact highlights the importance of this topic. Over the last two decades, actuators based on acoustic waves have attracted much attention and have been used in widespread applications from mixing to pumping. This paper reveals the effects of some control parameters such as wave amplitude and wave frequency on the dynamical behavior of a sessile drop in order to change the flow characteristics. For this purpose, the removal of water from surfaces and drop movement against gravity are considered. Flow dynamics is simulated using lattice Boltzmann method. The results show that the drop can be removed from the surface in a short... 

    Zygomatic bone registration based on a modified student's mixture model method

    , Article 26th National and 4th International Iranian Conference on Biomedical Engineering, ICBME 2019, 27 November 2019 through 28 November 2019 ; 2019 , Pages 88-92 ; 9781728156637 (ISBN) Noori, S. M. R ; Mobaraki, M ; Ahmadian, A ; Bayat, M ; Bahrami, N ; Sharif University of Technology
    Institute of Electrical and Electronics Engineers Inc  2019
    Abstract
    Point Set Registration (PSR) of anatomic parts is used in different fields such as Patient Specific Implant (PSI) design in Computer Assisted Surgery (CAS) procedure. We designed a modified rigid PSR method based on student's-t mixture model. The proposed method is compared with Coherent Point Drift (CPD) registration method. Higher convergence speed and the lower error value are the advantages of the suggested algorithm in compare with CPD. In our method, the number of iterations decreases by about 69%, and the final error improvement was about 7% in comparison with CPD. The robustness of the proposed algorithm makes it beneficial to be used in the procedure of designing PSI in both... 

    F.C.A: designing a fuzzy clustering algorithm for haplotype assembly

    , Article IEEE International Conference on Fuzzy Systems, 20 August 2009 through 24 August 2009 ; 2009 , Pages 1741-1744 ; 10987584 (ISSN) ; 9781424435975 (ISBN) Moeinzadeh, M. H ; Asgarian, E ; Noori, M. M ; Sadeghi, M ; Sharifian R., S ; Sharif University of Technology
    2009
    Abstract
    Reconstructing haplotype in MEC (Minimum Error Correction) model is an important clustering problem which focuses on inferring two haplotypes from SNP fragments (Single Nucleotide Polymorphism) containing gaps and errors. Mutated form of human genome is responsible for genetic diseases which mostly occur in SNP sites. In this paper, a fuzzy clustering approach is performed for haplotype reconstruction or haplotype assembly from a given sample Single Nucleotide Polymorphism (SNP). In the best previous approach based on reconstruction rate (Wang 2007[2]), all SNP-fragments are considered with equal values. In our proposed method the value of the fragments are based on the degree of membership... 

    The role of the gut microbiota and nutrition on spatial learning and spatial memory: a mini review based on animal studies

    , Article Molecular Biology Reports ; Volume 49, Issue 2 , 2022 , Pages 1551-1563 ; 03014851 (ISSN) Alemohammad, S.M.A ; Noori, S. M. R ; Samarbafzadeh, E ; Noori, S. M. A ; Sharif University of Technology
    Springer Science and Business Media B.V  2022
    Abstract
    The gut-brain axis is believed to constitute a bidirectional communication mechanism that affects both mental and digestive processes. Recently, the role of the gut microbiota in cognitive performance has been the focus of much research. In this paper, we discuss the effects of gut microbiota and nutrition on spatial memory and learning. Studies have shown the influence of diet on cognitive capabilities such as spatial learning and memory. It has been reported that a high-fat diet can alter gut microbiota which subsequently leads to changes in spatial learning and memory. Some microorganisms in the gut that can significantly affect spatial learning and memory are Akkermansia muciniphila,... 

    Simulatin of Reinforcement Corrosion in Pozzolanic Concrete by Neural Network

    , M.Sc. Thesis Sharif University of Technology Noori, Hassan (Author) ; Afshar, Abdollah (Supervisor)
    Abstract
    One of the most important factors of reducing durability of concrete structures is corrosion of steel reinforcement in concrete. In this paper, corrosion behavior of reinforcing steel in concrete is investigated in two different methods of protection based on neural network. As regard the first method, pozzolanic additives with optimized percentage were added to Concrete mix design (the percentage of these additives are 25% Weight of cement of fly ash, Micro silica with 10 percent of weight of cement and 25% of Blast Furnace slag weight of cement). In the second approach of protection, 0/5 percent weight of cement of ferrogard 901 inhibitor is added to basic mix concrete design and the... 

    Design of an Optimal Site Deployment Procedure in Different Air-Defense Scenarios

    , M.Sc. Thesis Sharif University of Technology Noori, Mohammad (Author) ; Fathi, Mohsen (Supervisor)
    Abstract
    One of the most important issues among defense is the increasing of the defense power using present facilities. Therefore, optimal setting and arrangement of equipment by considering different air-to-earth attack of enemy without knowing of properties and capabilities of available systems may not be possible. So, using defense equipment considering properties of them, and paying attention to existence restrictions and effective elements can have an effective role with the design of suitable algorithm.The main purposes of this thesis are: maximization of the efficiency of a defense system against. aerial invader targets, achieving the best arrangement of defense equipment based on suggested... 

    Innovative performance of Iranian knowledge-based firms: Large firms or SMEs?

    , Article Technological Forecasting and Social Change ; May , 2016 ; 00401625 (ISSN) Noori, J ; Bagheri Nasrabadi, M ; Yazdi, N ; Babakhan, A. R ; Sharif University of Technology
    Elsevier Inc  2016
    Abstract
    The debate over innovativeness of large firms and SMEs, which was bolded by Schumpeter, still continues under mixed empirical evidences. There are several implications for this debate including policy orientation in support of large firms or SMEs. But there is a scarce of studies in developing countries and no such study in Iran yet. The present study has explored the proportionality of increase of innovation activity versus firm size within 522 Iranian knowledge-based firms categorized in 9 industries. Innovation activity was measured by R&D expenditure while firm size stood for number of employees. Using log-log regression in the first phase, it was found that R&D expenditure confirms a... 

    Innovative performance of iranian knowledge-based firms: large firms or SMEs?

    , Article Technological Forecasting and Social Change ; Volume 122 , 2017 , Pages 179-185 ; 00401625 (ISSN) Noori, J ; Bagheri Nasrabadi, M ; Yazdi, N ; Babakhan, A. R ; Sharif University of Technology
    2017
    Abstract
    The debate over innovativeness of large firms and SMEs, which was bolded by Schumpeter, still continues under mixed empirical evidences. There are several implications for this debate including policy orientation in support of large firms or SMEs. But there is a scarce of studies in developing countries and no such study in Iran yet. The present study has explored the proportionality of increase of innovation activity versus firm size within 522 Iranian knowledge-based firms categorized in 9 industries. Innovation activity was measured by R&D expenditure while firm size stood for number of employees. Using log–log regression in the first phase, it was found that R&D expenditure confirms a... 

    Principal component analysis using constructive neural networks

    , Article 2007 International Joint Conference on Neural Networks, IJCNN 2007, Orlando, FL, 12 August 2007 through 17 August 2007 ; 2007 , Pages 558-562 ; 10987576 (ISSN) ; 142441380X (ISBN); 9781424413805 (ISBN) Makki, B ; Seyedsalehi, S. A ; Noori Hosseini, M ; Sadati, N ; Sharif University of Technology
    2007
    Abstract
    In this paper, a new constructive auto-associative neural network performing nonlinear principal component analysis is presented. The developed constructive neural network maps the data nonlinearly into its principal components and preserves the order of principal components at the same time. The weights of the neural network are trained by a combination of Back Propagation (BP) and Genetic Algorithm (GA) which accelerates the training process by preventing local minima. The performance of the proposed method was evaluated by means of two different experiments that illustrated its efficiency. ©2007 IEEE  

    Inclusion matrices and chains

    , Article Journal of Combinatorial Theory. Series A ; Volume 115, Issue 5 , 2008 , Pages 878-887 ; 00973165 (ISSN) Ghorbani, E ; Khosrovshahi, G. B ; Maysoori, Ch ; Mohammad Noori, M ; Sharif University of Technology
    2008
    Abstract
    Given integers t, k, and v such that 0 ≤ t ≤ k ≤ v, let Wt k (v) be the inclusion matrix of t-subsets vs. k-subsets of a v-set. We modify slightly the concept of standard tableau to study the notion of rank of a finite set of positive integers which was introduced by Frankl. Utilizing this, a decomposition of the poset 2[v] into symmetric skipless chains is given. Based on this decomposition, we construct an inclusion matrix, denoted by Wover(t, -) k (v), which is row-equivalent to Wt k (v). Its Smith normal form is determined. As applications, Wilson's diagonal form of Wt k (v) is obtained as well as a new proof of the well-known theorem on the necessary and sufficient conditions for... 

    Bundle pricing and inventory decisions on complementary products

    , Article Operational Research ; 2017 , Pages 1-25 ; 11092858 (ISSN) Taleizadeh, A. A ; Babaei, M. S ; Akhavan Niaki, S. T ; Noori daryan, M ; Sharif University of Technology
    Springer Verlag  2017
    Abstract
    Selling correlated products faces the sellers with the cross-selling, which is a key factor in managing revenue and costs of the sellers. Cross-selling is a phenomenon which happens when the demands of products are correlated so that the demand for one of the correlated products automatically initiates demand of another. In these cases, different selling tactics such as bundling, tying, mixed bundling, etc. are applied to sell the items. In this paper, an integrated pricing-inventory model for two complementary products under three selling strategies is developed. In the first model, it is assumed that the seller sells the products separately while those are packed and sold as bundling in...