Sharif Digital Repository

Microalgae as a candidate for production of biodiesel, possesses a hard cell wall that prevents intracellular lipids leaving out from the cells. Direct or in situ supercritical transesterification has the potential for destruction of microalgae hard cell wall and conversion of extracted lipids to biodiesel that consequently reduces the total energy consumption. Response surface methodology combined with central composite design was applied to investigate process parameters including: Temperature, Time, Methanol-to-dry algae, Hexane-to-dry algae, and Moisture content. Thirty-two experiments were designed and performed in a batch reactor, and biodiesel efficiency between 0.44% and 99.32% was... 

We introduce a method by which stochastic processes are mapped onto complex networks. As examples, we construct the networks for such time series as those for free-jet and low-temperature helium turbulence, the German stock market index (the DAX), and white noise. The networks are further studied by contrasting their geometrical properties, such as the mean length, diameter, clustering, and average number of connections per node. By comparing the network properties of the original time series investigated with those for the shuffled and surrogate series, we are able to quantify the effect of the long-range correlations and the fatness of the probability distribution functions of the series... 

Let G be a graph of order n and rank(G) denotes the rank of its adjacency matrix. Clearly, n ≤ rank (G) + rank (over(G, -)) ≤ 2 n. In this paper we characterize all graphs G such that rank (G) + rank (over(G, -)) = n, n + 1 or n + 2. Also for every integer n ≥ 5 and any k, 0 ≤ k ≤ n, we construct a graph G of order n, such that rank (G) + rank (over(G, -)) = n + k. © 2006 Elsevier Inc. All rights reserved  

This paper addresses a model-based audio content analysis for classification of speech-music mixed audio signals into speech and music. A set of new features is presented and evaluated based on sinusoidal modeling of audio signals. The new feature set, including variance of the birth frequencies and duration of the longest frequency track in sinusoidal model, as a measure of the harmony and signal continuity, is introduced and discussed in detail. These features are used and compared to typical features as inputs to an audio classifier. Performance of these sinusoidal model features is evaluated through classification of audio into speech and music using both the GMM (Gaussian Mixture Model)... 

In this paper, a new feature set is presented and evaluated based on sinusoidal modeling of audio signals. Duration of the longest sinusoidal model frequency track, as a measure of the harmony, is used and compared to typical features as input into an audio classifier. The performance of this sinusoidal model feature is evaluated through classification of audio to speech and music using both the GMM and the SVM classifiers. Classification results show the proposed feature, which could be used for the first time in such an audio classification, is quite successful in speech/music classification. Experimental comparisons with popular features for audio classification, such as HZCRR and LSTER,... 

We investigated the effect of loading rate on tensile properties of sheep bone-anulus-bone specimens in axial direction. Disc anulus Samples with adjacent bone attachments were prepared from lateral, posterior and anterior regions of sheep lumbar spinal segments. The specimens were then tested at different strain rates under non-destructive cyclic tensile loading followed by destructive tensile loading. Each specimen was prepared by embedding the bony parts in the polymethylmetacrylate (PMMA) exposing the anulus portion to support tension. The results of non-destructive cyclic tests indicated a decrease in the hysteresis energy loss as strain rate increased. In the destructive tests, no... 

Background: It is important to improve verbal Working Memory (WM) in reading disability, as it is a key factor in learning. There are commercial verbal WM training programs, which have some short-term effects only on the verbal WM capacity, not reading. However, because of some weaknesses in current verbal WM training programs, researchers suggested designing and developing newly structured programs that particularly target educational functions such as reading skills. In the current double-blind randomized clinical trial study, we designed a new Verbal Working Memory-Balance (VWM-B) program which was carried out using a portable robotic device. The short-term effects of the VWM-B program,... 

As a means to relieve traffic congestion, toll pricing has recently received significant attention by transportation planners. Inappropriate use of transportation networks is one of the major causes of network congestion. Toll pricing is a method of traffic management in which traffic flow is guided to proper time and path in order to reduce the total delay in the network. This article investigates a method for solving the minimum toll revenue problem in real and large-scale transportation networks. The objective of this problem is to find link tolls that simultaneously cause users to efficiently use the transportation network and to minimize the total toll revenues to be collected. Although... 

In this paper, a set of features is presented and evaluated based on sinusoidal modeling of audio signals. Amplitude, frequency, and phase parameters of the sinusoidal model are used and compared as input features into an audio classifier system. The performance of sinusoidal model features is evaluated for classification of audio into speech and music classes using both the Gaussian and the GMM (Gaussian Mixture Model) classifiers. Experimental results show superiority of the amplitude parameters of the sinusoidal model, which could be used for the first time for such an audio classification, as compared to the popular cepstral features. By using a set of 40 sinusoidal features, we achieved... 

This paper presents an FPGA-based fault injection tool, called FITO that supports several synthesizable fault models for dependability analysis of digital systems modeled by Verilog HDL. Using the FITO, experiments can be performed in real-time with good controllability and observability. As a case study, an OpenRISC 1200 microprocessor was evaluated using an FPGA circuit. About 4000 permanent, transient, and SEU faults were injected into this microprocessor. The results show that the FITO tool is more than 79 times faster than a pure simulation-based fault injection with only 2.5% FPGA area overhead. © 2008 IEEE  

We describe an intelligent co-simulator for real time production control of a complex flexible manufacturing system (CFMS) having machine and tool flexibility. The manufacturing processes associated with the CFMS are complicated with each operation being possibly done by several machining centers. The co-simulator design approach is built upon the theory of dynamic meta-model based supervisory control with the cooperation of its own embedded intelligent blocks. The system is implemented by coupling of the centralized simulation controller (CSC) and real-time simulator for enforcing dynamic strategies of shop floor control. The posteriori adaptive co-simulator is equipped with a concurrent... 

Due to the complexity of the human spinal motion segments, the intervertebral joints are often simulated in the musculoskeletal trunk models as pivots thus allowing no translational degrees of freedom (DOFs). This work aims to investigate, for the first time, the effect of such widely used assumption on trunk muscle forces, spinal loads, kinematics, and stability during a number of static activities. To address this, the shear deformable beam elements used in our nonlinear finite element (OFE) musculoskeletal model of the trunk were either substantially stiffened in translational directions (SFE model) or replaced by hinge joints interconnected through rotational springs (HFE model). Results... 

Epidemiological studies are divided over the causative role of body weight (BW) in low back pain. Biomechanical modeling is a valuable approach to examine the effect of changes in BW on spinal loads and risk of back pain. Changes in BW have not been properly simulated by previous models as associated alterations in model inputs on the musculature and moment arm of gravity loads have been neglected. A detailed, multi-joint, scalable model of the thoracolumbar spine is used to study the effect of BW (varying at five levels, i.e., 51, 68, 85, 102, and 119kg) on the L5-S1 spinal loads during various static symmetric activities while scaling moment arms and physiological cross-sectional areas of... 

Various hybrid EMG-assisted optimization (EMGAO) approaches are commonly used to estimate muscle forces and joint loads of human musculoskeletal systems. Use of EMG data and optimization enables the EMGAO models to account for inter- and intra-individual variations in muscle recruitments while satisfying equilibrium requirements. Due to implications in ergonomics/prevention and rehabilitation/treatment managements of low-back disorders, there is a need to evaluate existing approaches. The present study aimed to compare predictions of three different EMGAO and one stability-based optimization (OPT) approaches for trunk muscle forces, spinal loads, and stability. Identical measured... 

Congestion toll pricing is an inexpensive management way to mitigate the traffic congestion and reduce the delay in the network. One of the models that were proposed for toll pricing is the minimum toll revenue (MinRev) problem. The objective of this model is to find link-tolls that simultaneously cause users to efficiently use the network and to minimize the total toll revenues to be collected. Although it can be written as a linear model, when applied to road networks in practice, this model is difficult to be solved optimally in a reasonable time, due to its large size. This paper proposes a method to approximately estimate the minimal revenue tolls in large-scale roadway networks. The...