Sharif Digital Repository

We introduce a method by which stochastic processes are mapped onto complex networks. As examples, we construct the networks for such time series as those for free-jet and low-temperature helium turbulence, the German stock market index (the DAX), and white noise. The networks are further studied by contrasting their geometrical properties, such as the mean length, diameter, clustering, and average number of connections per node. By comparing the network properties of the original time series investigated with those for the shuffled and surrogate series, we are able to quantify the effect of the long-range correlations and the fatness of the probability distribution functions of the series... 

We investigated the effect of loading rate on tensile properties of sheep bone-anulus-bone specimens in axial direction. Disc anulus Samples with adjacent bone attachments were prepared from lateral, posterior and anterior regions of sheep lumbar spinal segments. The specimens were then tested at different strain rates under non-destructive cyclic tensile loading followed by destructive tensile loading. Each specimen was prepared by embedding the bony parts in the polymethylmetacrylate (PMMA) exposing the anulus portion to support tension. The results of non-destructive cyclic tests indicated a decrease in the hysteresis energy loss as strain rate increased. In the destructive tests, no... 

Let G be a graph of order n and rank(G) denotes the rank of its adjacency matrix. Clearly, n ≤ rank (G) + rank (over(G, -)) ≤ 2 n. In this paper we characterize all graphs G such that rank (G) + rank (over(G, -)) = n, n + 1 or n + 2. Also for every integer n ≥ 5 and any k, 0 ≤ k ≤ n, we construct a graph G of order n, such that rank (G) + rank (over(G, -)) = n + k. © 2006 Elsevier Inc. All rights reserved  

Microalgae as a candidate for production of biodiesel, possesses a hard cell wall that prevents intracellular lipids leaving out from the cells. Direct or in situ supercritical transesterification has the potential for destruction of microalgae hard cell wall and conversion of extracted lipids to biodiesel that consequently reduces the total energy consumption. Response surface methodology combined with central composite design was applied to investigate process parameters including: Temperature, Time, Methanol-to-dry algae, Hexane-to-dry algae, and Moisture content. Thirty-two experiments were designed and performed in a batch reactor, and biodiesel efficiency between 0.44% and 99.32% was... 

Trunk muscle forces and internal loads are computed under simulated standing postures while carrying a load using a nonlinear finite element model of the T1-S1 spine with realistic nonlinear load-displacement properties. A novel kinematics-based algorithm is applied that exploits a set of a priori known spinal sagittal rotations to solve the redundant active-passive system. The loads consist of upper body gravity distributed along the spine plus 200 N held in hands either in front or on sides. Predictions are in good agreement with reported measurements of posture, muscle EMG and intradiscal pressure. Minimal changes in posture (posterior pelvic tilt and lumbar flattening) substantially... 

Using the cross-correlation of the wavelet transformation, we propose a general method of studying the scale dependence of the direction of coupling for coupled time series. The method is first demonstrated by applying it to coupled van der Pol forced oscillators and coupled nonlinear stochastic equations. We then apply the method to the analysis of the log-return time series of the stock values of the IBM and General Electric (GE) companies. Our analysis indicates that, on average, IBM stocks react earlier to possible common sector price movements than those of GE  

Background: It is important to improve verbal Working Memory (WM) in reading disability, as it is a key factor in learning. There are commercial verbal WM training programs, which have some short-term effects only on the verbal WM capacity, not reading. However, because of some weaknesses in current verbal WM training programs, researchers suggested designing and developing newly structured programs that particularly target educational functions such as reading skills. In the current double-blind randomized clinical trial study, we designed a new Verbal Working Memory-Balance (VWM-B) program which was carried out using a portable robotic device. The short-term effects of the VWM-B program,... 

As membrane distillation (MD) is an under-developed separation process, specific membranes for MD applications are not yet commercially available. Therefore, microporous polymeric membranes made of hydrophobic materials fabricated for microfiltration purposes are usually used for MD applications. Characterization of such kind of membranes is important in order to achieve a better in-depth understanding of their performance and to fabricate specific membranes for MD process. One of the emerging characterization methods is atomic force microscopy (AFM) analysis. AFM is a newly developed high-resolution method that is useful for studying the surface topography of various types of membranes, and... 

In this study the effects of using different musculoskeletal models on load-displacement behavior of FE models of the human lumbar spine under external loads and moments have been analyzed in terms of equilibrium and clinical stability. A simplified and a complex architecture of muscles have been integrated to FE based models of lumbar spine and were loaded to simulate the load carrying behavior of human lumbar spine in flexion, extension and lateral bending. The displacement values as well as muscle forces have been computed and compared in both cases using optimization methods with different cost functions. The models showed similar kinematics in pure flexion but the simplified model... 

The aim of the present study was to evaluate the photocatalytic degradation of anthracene using Fe-doped TiO2 nanoparticles in the presence of UV. The structure and morphology of Fe-doped TiO2 nanoparticles were studied by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The applied nanoparticles were synthesized by the sol–gel method. The effect of influential parameters on the degradation of anthracene, including pH, time, nanopar-ticles dosage, and the concentration of anthracene was studied. Using the UV/Fe-doped TiO2 system, the optimum experimental values were obtained to be as follows: pH = 7, contact time = 60 min, anthracene concentration =... 

In this work, two-membrane distillation (MD) modes, direct contact MD, and sweeping gas MD were investigated for synthesized and real (Persian Gulf) seawater desalination. A commercial PTFE membrane with 0.22 μm pore size was characterized (using atomic force microscopy and scanning electron microscopy) and was used for experiments. A multipurpose plate and frame MD module was used for desalination experiments. The effects of various operating conditions and MD module design, as well as feed type on the permeation flux have been studied. The feed temperature was found to be the most effective operating parameter. The flow rate in both sides of the MD module was found to be effective;... 

This paper presents an analysis of the effects and propagation of faults in the open-core 32-bit OpenRISC 1200 microprocessor. The analysis is based on a total of 13,000 transient faults injected into 65 parts of the CPU module in the OpenRISC 1200 core described at the RTL model. A comparison of the effects of faults on the various parts of the CPU including the pipeline's registers, the CPU component such as the register file, the control unit, and the ALU, and the data and address buses is done. It is shown that about 30%, 40% and 27% of injected faults terminated in address, data, and control errors respectively. About 28% of all injected faults resulted in failures. © 2008 IEEE  

Fluid flow in porous media is affected by surface characteristics such as roughness and topography. In this work, to simulate the surface of natural porous structures in transparent interconnected media like micromodels, various degrees of roughness have been artificially created on flat glass substrates via different methods of laser ablation, cream etching, combination of laser ablation and cream etching, and hydrofluoric acid (HF) etching. The obtained surfaces by each method were characterized in detail via field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), energy-dispersive X-ray spectroscopy (EDX/EDS), and surface profilometry. The impact of high... 

Spine musculoskeletal (MS) models make simplifying assumptions on the intervertebral joint degrees-of-freedom (rotational and/or translational), representation (spherical or beam-like joints), and properties (linear or nonlinear). They also generally neglect the realistic structure of the joints with disc nuclei/annuli, facets, and ligaments. We aim to develop a novel MS model where trunk muscles are incorporated into a detailed finite element (FE) model of the ligamentous T12-S1 spine thus constructing a gold standard coupled MS-FE model. Model predictions are compared under some tasks with those of our earlier spherical joints, beam joints, and hybrid (uncoupled) MS-FE models. The coupled... 

Sweeping gas membrane distillation process was studied using flat sheet hydrophobic PTFE membrane. The effects of operating parameters, including feed temperature, feed flow rate, sweeping gas flow rate, and feed concentration on the permeate flux, were determined. The feed temperature significantly influenced the permeate flux. Increasing the feed temperature increased the permeate flux. The increase of feed concentration caused to reduce the permeate flux due to the increase of concentration polarization effect and reduction of vapor pressure difference. Sweeping gas flow rate led to increase the permeate flux due to reduction of vapor pressure in the permeate side. Higher air flow rate... 

In this work, desalination of saline brines using the sweeping gas membrane distillation (SGMD) process is investigated. The Taguchi method was applied for optimization of the operating parameters. An L9 orthogonal array was used to investigate the influence of pertinent variables, including feed temperature (Tf: 45°C, 55°C and 65°C), feed flow rate (Qf: 200, 400 and 600 mL/min), feed concentration (Cf: 10, 25 and 50 g/L) and sweeping gas flow rate (Qc: 4, 10, and 16 SCFH) on the distillate flux. Results of the experiments showed that maximum distillate flux, which was about 10 L/m2 h, obtained at 65°C feed temperature, 16 SCFH sweeping gas flow rate and brackish water with 10 g/L salt... 

In this work, sweeping gas membrane distillation (SGMD) process was used for concentrating of glucose syrup. The main questions in this work include: is SGMD process practical for concentrating of glucose solution prior the fermentation step in bioethanol process?. and are the commercially available hydrophobic membranes sufficient enough to develop the SGMD process in pilot scale for this issue?. To answer these questions, SGMD process was performed using three commercial membranes made of PP, PVDF and PTFE. All membranes characterized using scanning electron and atomic force microscopes for their morphological and topographical features. Important operating parameters including feed... 

In this paper, particle swarm optimization (PSO) is applied to synchronize chaotic systems in presence of parameter uncertainties and measurement noise. Particle swarm optimization is an evolutionary algorithm which is introduced by Kennedy and Eberhart. This algorithm is inspired by birds flocking. Optimization algorithms can be applied to control by defining an appropriate cost function that guarantees stability of system. In presence of environment noise and parameter uncertainty, robustness plays a crucial role in succeed of controller. Since PSO needs only rudimentary information about the system, it can be a suitable algorithm for this case. Simulation results confirm that the proposed...