Sharif Digital Repository

Today, the internal connections of the CPUs with a few billion wired transistors in 14 copper layers on the silicon wafer are possible. Recently, power dissipation has slowed the growth rate of clock growth in CPUs, and nowadays sometimes more than 60% power is lost in connections. In this situation, the increase in efficiency has been achieved in accordance with Moore's law with multi-core chips. This theme has made the connections between the cores much more important than before. Usually the information in the network structure on chip (NOC) is transmitted on these connections. Therefore, all three aspects of delay, power dissipation and bit rate are important for communication channels.... 

In recent years, there has been an increasing interest in posturography methods as an objective quantitative tool for assessing balance and indicating patient with high risk of fall. Although many posturographic studies tried to describe balance deficiencies in PD, little success has been achieved in utilizing static posturography as a tool for discriminating faller and non-faller PD patients. Furthermore, Dynamic posturography studies have delivered valuable insight into the potentiality of these methods for assessing balance, but these devices are very high in price and cumbersome to move that can limit the feasibility of their use in the clinical settings. The aims of this study were: 1)... 

Self-organized critical phenomena are interesting phenomena which are ubiquitous in nature. Examples include mountain ranges , coastlines and also activities in the hu-man's brain. In these processes, without fine-tuning of any external parameter such as the temperature, the system exhibits critical behavior. In other words, the dynamics of the system, drives it towards an state in which long range correlations in space and scaling behaviors can be seen.The first successful model which could characterize such systems was BTW model, introduced by Bak , Tang and Wiesenfeld in 1987. This model, later named Abelian sandpile model, was very simple and because of this simplicity, a large amount of... 

Bonding gravity with Quantum mechanics has always been a challenging issue. So that, accomplishing a theory of quantum gravity is one of the most important research topics in High-Energy Physics.Information paradox in black holes is among such issues which connect quantum mechanics with gravity. Black holes as a natural solution of Einstein equations have a distinction, with other solutions, since there exists an event horizon that imparts space-time into two causally disconnected regions.According to Hawking’s calculations, black holes would evaporate over time by the thermal radiation. This resulting thermal radiation has less information than the initial collapsed matter in a pure state.... 

Aspect-Oriented Programming is a software engineering paradigm that offers new constructs, such as join points, pointcuts, advices and aspects in order to improve separation of crosscutting concerns. The new constructs bring new type of programming faults with respect to crosscutting concerns, such as incorrect pointcuts, advice or aspect precedence. In fact, existing object-oriented testing techniques are not adequate for testing aspect-oriented programs. As a result, new testing techniques must be developed. In this paper, an approach based upon UML sequence diagrams for testing aspect- oriented program is presented. The proposed approach focuses on integration of one or several... 

Using revenue management in any industry can increase the profit. In aviation industries, due to the huge number of requests and travels for each airline, a revenue management system can lead to a good profit for the airlines. The first step in revenue management system is predicting the demand.In this article two models are developed using time series techniques, based on the information taken from one of the Iranian airlines in Tehran-Mashhad fly route.The first model is developed using ARIMA and seasonal-ARIMA models and the second one is based on the demand and price history, price in the day of prediction and the ARIMA model. The second model which is a combination of price, prior price... 

This thesis proposes a dynamic model for studding influences of suspension components behavior on rail vehicle dynamics. As the air springs are very important isolating component in rail vehicles, a new complete nonlinear air spring model, with taking into consideration of thermo–dynamical effects, is developed. The model coefficients are tuned based on the real test data and it can be easily used in dynamic modeling of air springs. The new proposed vehicle model is a complete track–vehicle model with 70 degree of freedoms which is addressed as a modular type. Experimental results from complete rail–vehicle field test, showed remarkable agreement between proposed model and test results.... 

Mobile edge computing (MEC) is a promising technology that aims to resolve cloud computing’s issues by deploying computation resources at the edge of mobile network and in the proximity of users. The advantages of MEC include reduced latency, energy consumption, and load on access and mobile core networks, to name but a few. Despite all the aforementioned advantages, the mobility of mobile network users causes the traditional MEC architecture to suffer from several issues, such as decreased efficiency and frequent service interruption. One of the methods to manage users’ mobility is virtual machine (VM) migration, where the VM containing the user’s task is migrated to somewhere closer to... 

Government intervention in markets may go beyond the market regulation. Interventions may cause some idiosyncratic price distortions. It means the relative prices of factors to become different among firms. Therefore, micro conditions for firms will be changed. These will result in misallocation of factor production between firms and change in manufacturing TFP. According to data from about 14000 medium and small industrial firms in Iran, removing misallocation of production factors (capital and energy) and output idiosyncratic distortions between industrial firms would result in 115 percent increase in manufacturing TFP.

 

The purpose of this research is the extraction of socio-economic factors (separation of household and household members) that affect the use of banking services in urban area of Iran. In this study we used data of the "family access to financial services in urban areas of Iran in 1387" that has been sampled by the department of economic statistics of central bank of Iran. The statistical information of this organization is in form of completed questionnaires and based on household addresses in a city and contains of 6055 urban household's information. In this project 15922 persons have been studied in urban households include the caretaker and the other family members. In addition to... 

Due date assignment for customer orders has been studied in various production environments. In this thesis a production system is considered in which the orders of several customers are produced in a single lot because of the economy of scale. If a lot is completed before receiving customer orders, inventory carrying cost is incurred. On shortages, a due date is quoted to customers and lead time quotation cost is incurred. The due date may not be met because of (lead-time) uncertainty in production system. Hence if the order is delivered after its due date, tardiness cost is charged. The literature reviews show that such a model is not considered by other researchers. Two different problems... 

A hierarchical production system in make-to-order environment is presented in this thesis. This production system is consisted of three different decision making levels. Maximum acceptance for production within customer specified time interval was done in the first stage, which is called order arriving stage, based on different client criteria, type of demanded product, and production system constraints. A new hierarchical decision making structure for accepting or rejecting arriving orders is proposed in this level. The output of this acceptance level is orders having maximum production system defined criteria, and minimum production cost along with order delivery time with minimum delay is... 

The study on the propane dehydrogenation process has been receiving significant attention due to the growing demand for propylene. The aim of this research is to develop an appropriate kinetic mechanism for dehydrogenation of propane over an industrial Pt–Sn/γ-Al2O3 catalyst in the presence of a very small amount of water. The reaction is carried out over the temperature range of 575 – 620 º C at atmospheric pressure. The results showed that a small amount of water and methanol can improve the performance of catalyst and also, increase the selectivity to COx. Addition the 0.5, 0.45, 0.3 water and 0.1, 0.05, 0.02 methanol are the optimum amount of these oxygenated compounds in order at... 

In recent years in assembly line balancing area many researchers have focused on identifying and modeling real world situations in assembly lines in order to obtain more suitable model. As a result many generalized models have been developed in assembly line balancing area. However, designing efficient algorithms to solve these generalized problems has just begun. In this study it is aimed to design efficient algorithms to solve one of these generalized problems. Specificcally two hybrid genetic algorithms (GA) are proposed to solve assembly line balancing problem with sequence dependent setup times. Scheduling of tasks in the stations has been less considered in the literature of assembly...