Sharif Digital Repository

Supercritical airfoils have been designed for transonic flow, however due to different flight conditions, the airfoil behavior during take-off and landing of the aircraft in subsonic flow regime must be known. Experimental and numerical information derived from supercritical airfoils are less than those of conventional airfoils. Because of the special geometry of supercritical airfoils and different phenomena that occurs through flow, using such airfoils even in steady states requires precise study/analysis of the flow. Therefore, one could benefit from experimental tests to better understand flow phenomena. The objective of the present research is the study effect of mean angle of attack... 

In this study, using the B3LYP/6-3111++g(d,p) computational level, we have explored the possibility of formation of some organic and bioorganic cation-cation clusters (CCC) in the absence of any anionic stabilizing species. Furthermore, we have shown the existence of a barrier energy for exothermic dissociation of these clusters. Herein, we have selected some biomolecules such as the chloroquine (CQ) antimalarial drug . The selected molecules possess the basic sites and can function as both hydrogen bond donors and acceptors. Also, a facile and direct synthetic route toward the rhodanine derivatives and thiazolidine-2,4-diones via a three-component coupling of carbon disulfide, primary... 

This study presents the experimental investigation, the effect of cement based chemical materials (Portland cement as a repair material No1. and 2 other cement base chemical materials) to upgrade the structural behavior of reinforced concrete slabs built with low quality (porous) concrete. Because materials used in this study are cement base it is expectable to behavior same as base concrete that its result is better compatibility with base structure against external factors. Other advantages of the use of these materials are consideration of economical and construction aspects. A total of four reinforced concrete column (200x200x800 mm) with low quality (porous) concrete have been built,... 

High-quality online services demand reliable and fast packet delivery at the network layer. However, clear evidence documents the existence of compromised routers in the ISP and enterprise networks, threatening network availability and reliability. A compromised router can stealthily drop, modify, inject, or delay packets in the forwarding path to launch Denial-of-Service, surveillance, man-in-the-middle attacks, etc. So researches tried to create intrusion detection methods to identify adversarial routers and switches. To this end, data-plane fault localization (FL) aims to identify faulty links and is an effective means of achieving high network availability. FL protocols use... 

Confining nematic liquid crystal between two curved boundary conditions while the nematic molecules have a degenerate planar anchoring leads to complex and beautiful textures of molecular disparagement(defect) in the bulk and on the surfaces. Such the liquid crystal shells are made with double-emulsion techniques in microfluidic devices have provided applications for micro-scale colloidal linkers.In this work, we have numerically minimized the elastic energy in one-constant approximation in present of Fournier’s degenerate surface potential with finite element method. The nematic shell is confined between two spherical surfaces that we have studied the final energies and their related... 

A liquid crystal is a state of matter composed of highly anisotropic building blocks. When liquid crystals are exposed to surfaces with given shapes and anchoring conditions, the orientation of their molecules gets spatially disordered and topological defects may form in the system. The interplay between liquid crystals and the geometry and topology of the colloidal particles has motivated extensive recent studies.In this thesis, we present the numerical modeling results for two faceted colloidal particles in a thermotropic nematic liquid crystal. To obtain the equilibrium nematic field with a finiteelement method, we numerically minimize the free energy of the system that based on the... 

Providing high bandwidth network infrastructures for ever increasing need of data transport is of great importance. The underling infrastructure for many communication services such as GSM/3G/4G mobile networks and Internet services is Synchronous Digital Hierarchy (SDH) optical transport systems. SDH are standardized protocols that multiplex multiple lower rate digital bit streams, such as E1 and Ethernet, and transfer them synchronously over optical fiber using lasers or LEDs. In addition to high data transfer rates, flexible network management and protection mechanisms have great importance, hence are part of SDH standards. In order to obtain flexible network architecture and protected... 

Development of Smart Grid and deployment of smart meters in large scale has raised a lot of concerns regarding customers’ privacy. Consequently, several schemes have been proposed to overcome the above mentioned issue. These schemes mainly rely on data aggregation as a method of protecting users’ privacy from the grid operators. However, the main problem with most of these schemes is the fact that they require a large amount of processing power at the meter side. This, together with the fact that smart meters don’t usually have a powerful processor, can cause the unavailability of smart meter data at the required time for operators of the grid, and at the same time disables smart meters from... 

Secure routing is a major key to service maintenance in wireless ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. Wormhole attack is one of the most severe active attacks to mobile ad hoc networks. Noting the resource limitations in such networks, nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a... 

Dynamic spectrum access with the aid of cognitive radio (CR) technology is a viable solution to spectrum scarcity. There are many military and emergency applications that require the use of cognitive radio ad-hoc networks (CRAHNs). In these net- works, nodes must first find each other in a wide spectrum and then exchange their desired data. The process of finding each other in a multichannel environment is a challenging task and is usually known as rendezvous. Since rendezvous is the first step in communication, disrupting will disable the nodes from establishing proper communication sessions. That results in a drastic degrade in the performance of the network. Therefore, it is important to... 

Spray-wall impingement is one of the phenomenon that associated in different subject such as spray cooling, combustion chamber and gas turbine. With the impingement of spray to the wall, liquid film begins to form. Wall film characteristics is still an important subject to study. Due to the various stages of liquid film formation from injection of spray till spray-wall impingement, the investigation of this phenomenon is far more complicated. This paper is meant to provide detailed data on spray-wall impingement and wall film formation physics with the help of computational analysis of OpenFOAM . A Lagrangian-Eulerian method based on discrete phase model (DPM) was employed to model... 

A Latin square of order n, is an n n array filled with n different symbols, each occurring exactly once in each row and exactly once in each column.Two cells of a Latin square are independent when they are not in the same row, or in the same column and they are not the same symbol. If they are not independent, they are called dependent. A k-coloring of a Latin square is assigning k colors to its cells where no two dependent cells have the same color. The smallest k for which we have a k-coloring for a Latin square L with k colors is called chromatic number of L and we denote it by L). If we consider the Cayley table of an arbitrary finite group of order n, then we have a Latin square of... 

In this study, pyrolysis features and corresponding kinetic behavior of non-metallic fractions of the paper-laminated phenol resin printed circuit boards (P-PCB) and fiberglass-reinforced epoxy resin printed circuit boards (E-PCB) were investigated by the use of simultaneous thermogravimetric analysis (TGA/DTG). The kinetic parameters of the P-PCB abs E-PCB during pyrolysis process were estimated from the experimental data by means of three iso-conversional kinetic models, including Friedman, Flynn-Wall-Ozawa (FWO), and Kissinger-Akahira-Sunose (KAS) methods. The activation energy range obtained for P-PCB and E-PCB utilizing the Friedman method was within 117–594.1 and 88.42-295.3 kJ.mol-1,... 

Vertical milling machine is one of the most common machine tools for precision parts production. The static deflection of the machine tool and thus the displacement of the tool, is due to the high machining forces is the most important factor in reducing the dimensional Precision of the work piece. Also, the overlap of the frequency range of operation with the natural frequencies causes an undesirable resonance phenomenon. Reducing the strain energy of the column and thus the reducing the displacement of the tool, and increasing the first natural frequency of the milling machine, given that the frequency range of operating is below the first frequency, is a desirable change that can be...