Sharif Digital Repository

Today the electric utility industry is being restructured from monopoly and regulated structure to competitive and deregulated structure. Changes in electricity markets, in technology, economics and regulatory structures have created a new interest in small-scale generation and efficiency resources, dispersed throughout the lower voltage networks. Many reasons have been developed and encouraged using DG (Distributed Generation) in different countries such as power system restructuring, DG technologies advances and price increases. The most important problems of many developing countries is the high cost of finance and limited access to financial resources because of the electric industry is... 

Power quality has become an increasing concern to utilities and customers. The increased concern has resulted in measuring power quality variations and characteristic disturbances for different distribution companies. This paper explains the results of power quality indexes for 50 customer loads at two voltage levels 20kV and 400v. The measurement period is 7 days with 10 minutes intervals. Also this survey has been presented according to IEC61000 and Iranian Power Quality Standard (IPQS). IPQS has some differences from IEC61000, EN50160 and IEEE standards in power quality indexes, which are investigated in this paper. At the end of paper, individual and global power indicators for all... 

Wind power is a promising source of electric power generation since it has tremendous environmental and social benefits. The generation scheduling (GS) problem encounters several uncertainties in terms of the system's parameters such as load, reserve and available wind power generation. The modeling of those uncertainties is an important issue in power system scheduling. A fuzzy based modeling approach can be used to develop the generation schedule under an uncertain environment. In this paper, the type-2 fuzzy membership function (MF) is implemented to model the linguistic uncertainty of type-1 MF of available wind power generation which stems from opinions of different experts. The... 

Wind power is a promising alternative in power generation because of its tremendous environmental and social benefits. Generation scheduling (GS) is more important in a power system integrating wind farms. Unlike conventional power generation sources, wind power generators supply intermittent power because of uncertainty in resource. This paper presents a fuzzy approach to the generation scheduling problem of a GenCo considering uncertainties in parameters or constraints such as load, reserve and available wind power generation. The modeling of constraints is an important issue in power system scheduling. A fuzzy optimization approach is an approach that can be used to obtain the generation... 

Integration of wind power generation creates new concerns for operation engineers in a power system. Unlike conventional power generation sources, wind power generators supply intermittent power due to uncertainty in parameters of wind such as its velocity. This paper presents probabilistic model for load and wind power uncertainty which can be used in operation planning (with durations up to one or two years). A stochastic model is proposed to simulate the status of units that are directly affected by the load and wind power generation uncertainties. This paper develops a solution method for generation scheduling of power system, while taking into account the stochastic behavior of the load... 

Wind power introduces a new challenge to system operators. Unlike conventional power generation sources, wind power generators supply intermittent power because of uncertainty in its resource. In a power system involved largescale wind power generation scenario, wind intermittency could oblige the system operator to allocate a greater reserve power, in order to compensate the possible mismatch between predicted and the actual wind power output. This would increase the total operation cost. This paper presents a new approach in fuzzy based generation scheduling (GS) problem using mixed integer nonlinear programming (MINLP). While the reserve requirements, load generation balance and wind... 

Large-scale integration of wind power in the electricity system presents some planning and operational difficulties, which are mainly due to the intermittent and difficult nature of wind prediction process. Therefore it is considered as an unreliable energy source. This paper presents a new approach for solving the generation scheduling (GS) problem. It will consider the reserve requirement, load balance and wind power availability constraints. The particle swarm optimization (PSO) method is suggested to deal with the equality and inequality constraints in the GS problem. The proposed PSO is applied to a 12-unit test system (including 10 conventional thermal generating units and 2 wind... 

This paper presents a new approach for unit commitment (UC); where a large scale wind power exists and the wind speed has a fuzzy characteristic; by using particle swarm optimization method (PSO). In this approach, the system reserve requirements, the requirement of having a load balance, and the wind power availability constraints are realized. A proper modeling of these constraints is an important issue in power system scheduling. Since these constraints are "fuzzy" in nature, any crisp treatment of them in this problem may lead to over conservative solutions. In this paper, a fuzzy optimization-based method is developed to solve power system UC problem with a fuzzy objective function and... 

Four 5-, 10-, 20- and 30-story moment frames, representing low-, mid-, and two high-rise structures, were subjected to a great number of idealized directivity pulses. The amplitudes and periods of pulses vary from 0.02 g to 1.0 g and 0.5 to 12 sec, respectively. Over 1400 nonlinear dynamic analyses of low- to high-rise moment frames were performed which were feasible through using modified fish-bone model. The distribution of interstory drift along the height was studied and two applied contours were proposed: (i) the maximum interstory drift contour, and (ii) the critical story contour. These contours were demonstrated versus the ratio of natural period of the structure to the pulse period... 

In this article singular points of a parallel manipulator are obtained based on a novel geometrical method. Here we introduce the constrained plain method (CPM) and some of its application in parallel mechanism. Given the definition of constraint plane (CP) and infinite constraint plane (ICP) the dependency conditions of constraints is achieved with the use of a new theorem based on the Ceva geometrical theorem. The direction of angular velocity of a body is achieved by having three ICPs with the use of another theorem. Finally, with the use of the above two novel theorems singularities of the 3UPF_PU mechanism are obtained. It should be emphasized that this method is completely geometrical,... 

An analytical model is proposed to study the effect of particle size on melting enthalpy and entropy of metallic nanoparticles (NPs). The Mott's and Regel's equations for melting entropy in the combination of core average coordination number (CAC) and surface average coordination number (SAC) of freestanding NPs are considered. Clusters of icosahedral (IC), body centered cubic (BCC), and body centered tetragonal (BCT) structure without any vacancies and defects are modeled. Using the variable coordination number made this model to be in good agreement with experimental and molecular dynamic (MD) results of different crystal structures. The model predicts melting entropy and enthalpy of... 

Grinding is widely used for manufacturing of components that require fine surface finish and good dimensional accuracy. In this study a thermo-mechanical finite element analysis is conducted to find out how grinding parameters can affect temperature and residual stress distribution in the workpiece. Results of parametric study presented in this work indicate, by carefully selecting the grinding parameters, minimum thermal and mechanical damage can be achieved. Higher workpiece velocities produce higher surface residual stress. By increasing depths of cut, depth of tensile residual stresses increases. Convection heat coefficient does not have any considerable effect on surface residual stress... 

Adaptive Noise Cancellation (ANC) is a well-known technique for background noise reduction in automobile and vehicular environments. The noise fields in automobile and other vehicle interior obey the diffuse noise field model closely. On the other hand, the ANC does not provide sufficient noise reduction in the diffuse noise fields. In this paper, a new multistage post-filter is designed for ANC as a solution to diffuse noise conditions. The designed post-filter is a single channel Linear Prediction (LP) based speech enhancement system. The LP is performed by an adaptive lattice filter and attempts to extract speech components by using intermediate ANC signals. The post-filter has no... 

Shot peening is widely used to improve the fretting fatigue strength of critical surfaces. Fretting fatigue occurs in contacting parts that are subjected to fluctuating loads and sliding movements at the same time. This paper presents a sequential finite element simulation to investigate the shot peening effects on normal stress, shear stress, bulk stress and slip amplitude, which are considered to be the controlling parameters of fretting damage. The results demonstrated that among the modifications related to shot peening, compressive residual stress has a dominant effect on the fretting parameters  

One-dimensional (1D) MgO structures were successfully synthesized via carbothermic reduction of mechanically activated mixture of MgO and graphite. Mechanical activation of source materials before carbothermic reduction can substantially enhance the formation of MgO products at a temperature (1000 °C) relatively lower than that required in previous approaches (≥1200 °C). However, the morphology of MgO formed is dependent on the degree of mechanical activation and the condition of the subsequent carbothermic reduction. Two distinctive morphologies were found for MgO products synthesized using our method: single crystalline nanorods with rectangular cross-sections whose diameters range from 50... 

Attitude and vibration control of a general form of flexible satellites is addressed in this paper. Partial differential dynamic equations are derived considering new details such as multi sectioned solar panels and elastic connections between main hub and solar panels. Boundary control approach is adopted to eliminate simplification errors of discrete models, using just one actuator in the hub. Asymptotic stability of attitude dynamics is proved for a group of boundary controllers and necessary conditions for asymptotic stability of vibrations are discussed. Being independent of modeling accuracy and using easily measurable feedbacks are among advantages of the proposed class of... 

Characterization and calcination behavior of a low-grade manganese ore, as a part of Mn ferroalloys production, was studied by XRF, ex-situ XRD, in-situ XRD, and SEM-EDS techniques. Calcination experiments were carried out at and up to 900 °C (1173 K) in air and argon atmospheres. The samples were in particles and powder forms. The results indicated that both quartz and calcite phases in the ore exhibit a bimodal spatial distribution; as relatively large regions and finely distributed in the Mn- and Fe-containing phases. By Rietveld analysis of the in-situ XRD data, the reactions occurring upon heating during the calcination process were deduced. Thermal decomposition and reactive diffusion... 

Estimating the position of a mobile set is of great importance in new mobile services. However, in most cases, the accuracy should be less than 100 meters. This accuracy is hard to reach especially in urban areas. The main problem is that there are a lot of obstacles like buildings between the BTS and the mobile set. Thus the time measured between BTS and the mobile set is somehow greater than the time it takes the wave to travel directly between two points. This paper introduces an optimized solution for TDOA as one of the most efficient ways for finding the location of a mobile phone. Considering the standards and limitations of both GSM and UMTS, the Authors present a solution for... 

Weighting elements to achieve radiation patterns with desired characteristics is a classical work in phased array antennas. These characteristics can be low sidelobe level, narrow beamwidth, high directivity, pattern nulling in special angle and etc. For each of these characteristics, different methods have been introduced. Most of methods have been presented for uniform arrays, however there are lots of methods to obtain a desired pattern for antennas with non-uniform element distances. The problem with these methods is complexity or not very good results. In this paper, fast and easy methods based on Least Square Error that leads to good results are presented. In addition, weighting of...