Loading...
Search for: soleyman--rouhollah
0.115 seconds

    Synthesis and swelling behavior of a new superabsorbent hydrogel network based on polyacrylamide grafted onto salep [electronic resource]

    , Article Journal of Applied Polymer Science ; Volume 112, Issue 5, pages 2625–2633, 5 June 2009 Pourdjavadi, A. (Ali) ; Rezanejad Barajee, Ghasem ; Soleyman, Rouhollah ; Sharif University of Technology
    Abstract
    Synthesis and swelling behavior of a new superabsorbent hydrogel based on natural salep grafted with polyacrylamide is described. The new superabsorbent hydrogel biopolymer was synthesized via radical crosslinking and graft copolymerization of acrylamide monomer onto salep backbones. Regarding to the water absorption of hydrogel, the best synthesis condition is reported. FTIR spectroscopy and thermogravimetric analysis were used to confirm the structure of the final product and a mechanism for superabsorbent hydrogel formation was also suggested. After preparing the desired hydrogels based on optimum condition, several factors affecting the swelling behavior of hydrogel including pH of... 

    Biopolymers Mediated Green Synthesis of Silver Nanoparticles With Definite Shape and Their Biomedical Activity Investigation

    , M.Sc. Thesis Sharif University of Technology Soleyman, Rouhollah (Author) ; Pourjavadi, Ali (Supervisor)
    Abstract
    Silver nanoparticles (Ag-NPs) are promising agents in bionanotechnology, because of their unique activity against unfavorable processes in bioscience such as undesirable microbial growth, angiogenesis in tumors and etc. Ag-NPs have been widely used in wound dressing; wound healing, water treatment filters, inks, sensors, catalysts, cosmetics, orthopaedics, surgical instruments and vascular prosthesis. Ever-increasing applications of Ag-NPs in biomedical field are due to the anti-bacterial, anti-fungal, anti-viral, anti-platelet, anti-proliferative, anti-inflammatory (apoptosis detection) and anti-angiogenesis properties (cancer therapy). In the current research, we synthesized Ag-NPs in... 

    Numerical Simulation of Residual Stress Formation During Selective Laser Melting Process

    , M.Sc. Thesis Sharif University of Technology Maleki, Pedram (Author) ; Tavakoli, Rouhollah (Supervisor)
    Abstract
    One of the major challenges in Additive Manufacturing is the creation of residual stresses due to the high temperature gradient in the solidification zone. This will cause problems such as cracks in the structure, metallurgical defects as well as deformation and dimensional accuracy reduction in the finished product. The purpose of this study is to perform mathematical modeling and computer simulation of the selective laser melting process (SLM) to predict these stresses as well as identify the effective parameters on this phenomenon. The conditions were adjusted in this model with the actual coefficients of the device. Additionally, the powder used in this project is Ti6Al4V material. By... 

    Automatic Web Services Composition Using HSIP

    , M.Sc. Thesis Sharif University of Technology Aram, Siamak (Author) ; Soleyman Fallah, Mehran (Supervisor)
    Abstract
    We propose Hierarchical Web Services Composer (HWSC) as a technique for fully automatic Web services composition. It takes functional and nonfunctional requirements of a Web service and returns possible compositions that realize those requirements. In doing so, HWSC deploys the Hierarchical Services of Interacting Processes (HSIP), a formalism of concurrent systems, and integrates its capabilities with the existing methods and protocols for service oriented computing. The proposed framework technique is then analyzed and validated through a number of real-life examples  

    Novel carbon-nanotube-based organogels as candidates for oil recovery

    , Article Polymer International ; Volume 62, Issue 2 , JUN , 2013 , Pages 179-183 ; 09598103 (ISSN) Pourjavadi, A ; Doulabi, M ; Soleyman, R ; Sharif University of Technology
    2013
    Abstract
    A simple method for synthesis of novel organogels based on multiwalled carbon nanotubes (MWCNTs) is reported. Three classes of organogels were synthesized by crosslinking polymerization of dodecyl methacrylate with various weight percentages of 1,4-butanediol dimethacrylate, vinyl-group-modified MWCNTs or pristine MWCNTs in the presence of 2,2-azoisobutyronitrile as initiator. In this reaction, the carbon nanotubes (CNTs) served simultaneously as an adsorbent, a comonomer and a crosslinking agent. The oil-absorbent containing CNTs showed much higher swelling capacity in oil and organic solvents compared with that without CNTs. Therefore, CNT-based organogels can be introduced as a promising... 

    Synthesis, characterization, and swelling behavior of alginate-g- poly(sodium acrylate)/kaolin superabsorbent hydrogel composites

    , Article Journal of Applied Polymer Science ; Volume 105, Issue 5 , 2007 , Pages 2631-2639 ; 00218995 (ISSN) Pourjavadi, A ; Ghasemzadeh, H ; Soleyman, R ; Sharif University of Technology
    2007
    Abstract
    A novel superabsorbent composite based on sodium alginate and the inorganic clay kaolin was synthesized via the graft copolymerization of acrylic acid (AA) in an aqueous medium with methylene bisacrylamide (MBA) as a crosslinking agent and ammonium persulfate (APS) as an initiator. The effects of reaction variables, such as the MBA, AA, and APS concentrations and the alginate/kaolin weight ratio, on the water absorbency of the composite were systematically optimized. Evidence of grafting and kaolin interactions was obtained by a comparison of the Fourier transform infrared spectra of the initial substrates with that of the superabsorbent composite, and the hydrogel structure was confirmed... 

    Phase Field Simulation of Microstructure Ternary Eutectic Solidification

    , M.Sc. Thesis Sharif University of Technology Dalvand, Mehdi (Author) ; Tavakoli, Rouhollah (Supervisor)
    Abstract
    Physical and mechanical properties of cast alloys is partly a function of the morphology and volume fraction of phases from freezing. The microstructure of the eutectic solidification is function of physical properties (especially mobility and surface tension) and the volume fraction of phases involved in the evolution. The prediction of solidification microstructures will be very helpful for improving the mechanical properties of casting alloys and designing of new families of alloys. The theoretical study of the formation of eutectic microstructures is very difficult and almost impossible in general cases and empirical studies are expensive. The purpose of this study is to predict the... 

    Optimal Design of Parting Line in the Shape Casting Processes

    , M.Sc. Thesis Sharif University of Technology Pourfathi, Ali (Author) ; Tavakkoli, Rouhollah (Supervisor)
    Abstract
    More than 70 weight percentage of using parts in diverse industries (such as military, civil, automobile productions and etc.) are produceed by the casting processes. For each one of the casting procceses, mold cavity is requisite for arrived molten metal in the mold cavity to get eventuated as a solidified part. Based on mold ilk, if the mold is permanent, the cast part must be capable to be remoeved from the the mold inside. For the non-permanent mold (asssuming multi-piece and non-monolithic), if the model requires to be removed from the mold inside after molding and before casting, only model (no cast part) has to be moldable (why for removing the solidified cast part from the... 

    Production of Sn Base Composite Solder Reinforced by Nanoparticles Via Melt-spinning Technique

    , M.Sc. Thesis Sharif University of Technology Mohammadyari, Saeid (Author) ; Tavakkoli, Rouhollah (Supervisor)
    Abstract
    Lead-containing solder alloys in particular Sn-37Pb is the most common alloy used in electronics industry, this alloy has the good mechanical properties and excellent wetting properties and low prices. Recently, increasing environmental and health concerns over the toxicity of lead combined with strict legislation to ban the use of lead-based solders have provided an inevitable driving force for the development of lead-free solder alloys. A group of these lead-free solders are nanocomposite solders that because of having the reinforcement nano particles exhibit lots of unique properties, such as good mechanical and thermal properties. The aim of this research produce a new tin base... 

    A Phase-Field Model for Inhomogeneous Multiferroic Materials

    , M.Sc. Thesis Sharif University of Technology Jafari, Bahram (Author) ; Tavakoli, Rouhollah (Supervisor)
    Abstract
    In this thesis, by deliberately embedding “emplacements” in the system to locally break the inversion and the time reversal symmetries, the manifold of all possible microstructures is navigated in pursuit of the one that can give rise to maximal magnetoelectric effect mediated by elastic energy of piezoelectric-piezomagnetic phases via their interface --- needless to mention the low intensity of such an effect in single-phase multiferroics. The configuration with the maximal coupling is sought within the context of phase-field modeling. In order to numerically track the conserved dissipative dynamics of the interface (namely, the Cahn-Hilliard equation) --- that is nonlocal by the nature of... 

    Crosslinked poly(ionic liquid) as high loaded dual acidic organocatalyst

    , Article Journal of Molecular Catalysis A: Chemical ; Volume 365 , 2012 , Pages 55-59 ; 13811169 (ISSN) Pourjavadi, A ; Hosseini, S. H ; Soleyman, R ; Sharif University of Technology
    2012
    Abstract
    A dual acidic heterogeneous organocatalyst was synthesized by copolymerization of acidic ionic liquid monomer (vinyl-3-(3-sulfopropyl) imidazolium hydrogen sulfate [VSim][HSO 4]) and ionic liquid crosslinker (1,4-butanediyl-3,3′-bis-l-vinyl imidazolium dihydrogen sulfate). The resulting ionic heterogeneous catalyst is shown to be an efficient dual acidic organocatalyst for synthesis of dihydropyrimidines using the Biginelli synthetic route under mild reaction conditions in high yields. Since monomers make the catalyst bed, crosslinked poly(ionic liquid) will have high loading level of acidic groups comparing to other heterogeneous acid catalysts. Despite of conventional heterogeneous ionic... 

    Novel highly swelling nanoporous hydrogel based on polysaccharide/protein hybrid backbone

    , Article Journal of Polymer Research ; Volume 18, Issue 3 , 2011 , Pages 337-346 ; 10229760 (ISSN) Bardajee, G. R ; Pourjavadi, A ; Soleyman, R ; Sharif Unviersity of Technology
    2011
    Abstract
    Novel high capacity swelling nanoporous hydrogel (NPH) was synthesized via graft copolymerization of acrylamide (AAm) onto kappa-carrageenan (kC, as a polysaccharide) and gelatin (as a protein) hybrid backbone, after hydrolysis of this system. The Taguchi method as a strong experimental design tool was used for its optimized synthesis. The Taguchi method was applied for the experimental and standard 9 orthogonal array (OA) with four factors and three levels for each factor. A series of NPHs were synthesized by proposed conditions of Qualitek-4 Software. Considering the results of 9 trials according to analysis of variance (ANOVA), optimum conditions were proposed. The swelling behavior of... 

    Novel nano-porous hydrogel as a carrier matrix for oral delivery of tetracycline hydrochloride

    , Article Colloids and Surfaces A: Physicochemical and Engineering Aspects ; Volume 392, Issue 1 , December , 2011 , Pages 16-24 ; 09277757 (ISSN) Bardajee, G. R ; Pourjavadi, A ; Soleyman, R ; Sharif University of Technology
    2011
    Abstract
    A novel nano-porous hydrogel (NPH) was synthesized via graft copolymerization of sodium acrylate (Na-AA) and acrylamide (AAm) onto salep backbones and its application as a carrier matrix for oral delivery of tetracycline hydrochloride (TH) was investigated. The Taguchi method as a strong experimental design tool was used for synthesis optimization. The swelling behavior of optimum hydrogel was measured in various media. The hydrogel formation was confirmed by Fourier transform infrared spectroscopy (FT-IR) and thermogravimetrical analysis (TGA). The study of the surface morphology of the hydrogels using SEM and AFM showed a nanoporous (average pore size: 180. nm) structure for the sample... 

    Synthesis and swelling behavior of a new superabsorbent hydrogel network based on polyacrylamide grafted onto salep

    , Article Journal of Applied Polymer Science ; Volume 112, Issue 5 , 2009 , Pages 2625-2633 ; 00218995 (ISSN) Pourjavadi, A ; Rezanejade Bardajee, G ; Soleyman, R ; Sharif University of Technology
    2009
    Abstract
    Synthesis and swelling behavior of a new superabsorbent hydrogel based on natural salep grafted with Polyacrylamide is described. The new superabsorbent hydrogel biopolymer was synthesized via radical crosslink-ing and graft copolymerization of acrylamide monomer onto salep backbones. Regarding to the water absorption of hydrogel, the best synthesis condition is reported. FTIR spectroscopy and thermogravimetric analysis were used to confirm the structure of the final product and a mechanism for superabsorbent hydrogel formation was also suggested. After preparing the desired hydrogels based on optimum condition, several factors affecting the swelling behavior of hydrogel including pH of... 

    Irradiation synthesis of biopolymer-based superabsorbent hydrogel: optimization using the taguchi method and investigation of its swelling behavior

    , Article Advances in Polymer Technology ; Volume 28, Issue 2 , 2009 , Pages 131-140 ; 07306679 (ISSN) Rezanejade Bardajee, G ; Pourjavadi, A ; Soleyman, R ; Sharif University of Technology
    2009
    Abstract
    In this report, the synthesis of a novel superabsorbent hydrogel via γ-irradiation graft copolymerization of acrylamide onto sodium alginate and kappa-carrageenan hybrid backbones in a homogeneous solution is described. The Taguchi method was used as a powerful experimental design tool for synthesis optimization. A series of superabsorbent hydrogels was synthesized by proposed conditions of Qualitek-4 software. Considering the results of nine trials according to analysis of variance, optimum conditions were proposed. The swelling behavior of optimum superabsorbent hydrogels was studied in various solutions, with pH values ranging from 1 to 13. In addition, swelling kinetics, swelling in... 

    Simulation of the Effect of Cooling Rate and Chemical Composition on the Atomic Structure of Bulk Metallic Glass Iron-Phosphorus and Nickel-Phosphorus

    , M.Sc. Thesis Sharif University of Technology Hosseinzadeh, Danial (Author) ; Tavakoli, Rouhollah (Supervisor)
    Abstract
    bulk metallic glass Unlike metal materials that have a crystalline structure, amorphous glass is an amorphous material with an irregular atomic structure that simultaneously has the same physical properties as metals. Due to the absence of crystal defects such as dislocation and grain boundaries, these materials show unique mechanical properties such as high strength and elastic strain, abrasion resistance and proper corrosion. However, their plastic deformation is heterogeneous, concentrated, and accompanied by sudden failure. Unlike metals, these materials do not have a long-range crystalline order, and their atomic structure includes short-range and mid-range order. The short-range order... 

    Core-shell γ-Fe2O3/SiO2/PCA/Ag-NPs hybrid nanomaterials as a new candidate for future cancer therapy

    , Article International Journal of Nanoscience ; Vol. 13, issue. 1 , February , 2014 Soleyman, R ; Pourjavadi, A ; Masoud, N ; Varamesh, A ; Sharif University of Technology
    2014
    Abstract
    In the current study, γ-Fe2O3/SiO 2/PCA/Ag-NPs hybrid nanomaterials were successfully synthesized and characterized. At first, prepared γ-Fe2O3 core nanoparticles were modified by SiO2 layer. Then they were covered by poly citric acid (PCA) via melting esterification method as well. PCA shell acts as an effective linker, and provides vacancies for conveying drugs. Moreover, this shell as an effective capping agent directs synthesis of silver nanoparticles (Ag-NPs) via in situ photo-reduction of silver ions by sunlight-UV irradiation. This system has several benefits as a suitable cancer therapy nanomaterial. Magnetic nanoparticles (MNPs) can guide Ag-NPs and drugs to cancer cells and then... 

    Novel salep-based chelating hydrogel for heavy metal removal from aqueous solutions

    , Article Polymers for Advanced Technologies ; Volume 27, Issue 8 , 2016 , Pages 999-1005 ; 10427147 (ISSN) Soleyman, R ; Pourjavadi, A ; Monfared, A ; Khorasani, Z ; Sharif University of Technology
    John Wiley and Sons Ltd  2016
    Abstract
    A novel optimized chelating hydrogel was synthesized via graft copolymerization of acrylamide and 2-hydroxyethyl methacrylate (as two-dentate chelating co-monomer) onto salep (a multicomponent polysaccharide obtained from dried tubers of certain natural terrestrial orchids) using N,N′-methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. Reaction parameters (N,N′-methylenebisacrylamide and ammonium persulfate amounts as well as acrylamide/2-hydroxyethyl methacrylate weight ratio) affecting the water absorption of the chelating hydrogel were optimized using a systematic method to achieve a hydrogel with high swelling capacity as possible. Heavy metal ion adsorption... 

    Grafted CMC/silica gel superabsorbent composite: Synthesis and investigation of swelling behavior in various media

    , Article Journal of Applied Polymer Science ; Volume 108, Issue 5 , 2008 , Pages 3281-3290 ; 00218995 (ISSN) Pourjavadi, A ; Seidi, F ; Salimi, H ; Soleyman, R ; Sharif University of Technology
    2008
    Abstract
    In the present study, we attempt to synthesize and characterize novel CMC-g-poly (acrylic acid-co-2-acrylamido-2-methylpropanesulfonic acid)/silica gel composite. Infrared spectroscopy and TGA thermal analysis were carried out to confirm the chemical structure of the hydrogel. Moreover, morphology of the samples was examined by scanning electron microscopy. The effect of reaction variables affecting on water absorbency of the composite and swelling behavior in various solvents, salt, and pH solutions was investigated. Maximum water absorbency of the optimized final product was found to be 4000 g/g in distilled water. The absorbency under load (AUL) of the hydrogel was also determined by... 

    Magnetic removal of crystal violet from aqueous solutions using polysaccharide-based magnetic nanocomposite hydrogels

    , Article Polymer International ; Volume 62, Issue 7 , 2013 , Pages 1038-1044 ; 09598103 (ISSN) Pourjavadi, A ; Hosseini, S. H ; Seidi, F ; Soleyman, R ; Sharif University of Technology
    2013
    Abstract
    Magnetic Fe3O4@SiO2 starch-graft-poly(acrylic acid) (SPAA) nanocomposite hydrogels were prepared and used as absorbents for removal of crystal violet from aqueous solutions. Dynamic swelling, effect of contact time, absorption kinetics and nanocomposite hydrogel mass for removal of crystal violet dyes from aqueous solutions were studied. Fourier transform infrared spectroscopy, scanning electron microscopy and vibrating sample magnetometer measurements were used for the characterization of the nanocomposite hydrogels. The nanocomposite hydrogels had high magnetic sensitivity under an external magnetic field, which allowed their magnetic separation from water, thus avoiding secondary...