Loading...
Search for:
taghavi-golsefidi--abbas
0.147 seconds
Total 409 records
Survey and synthesis of zeolite adsorbents in Olefins and Paraffinssorption
, M.Sc. Thesis Sharif University of Technology ; Soltanieh, Mohammad (Supervisor)
Abstract
Olefin/ paraffin separation is one of the most important processes in the petrochemical industries.In the last decades, adsorption and membrane processes are a new technology considered significantly for this purpose. In order to synthesizeof zeolite powder (pure silica zeolite STT and CHA), raw materials were made by two methods and their HNMR spectrum was recorded and thenzeolite powder was synthesized. X ray diffraction(XRD) and scanning electron microscopy (SEM) images were taken,showing the same results as the refference structure.To consider synthesized zeolite powdersand olefin/ paraffin interactions, surface adsorption ofthose gases was accomplished on two zeolite powders. After...
APIS’ Evolution Comprehension Via Analyzing the Q&As in the Stack Overflow Website
, M.Sc. Thesis Sharif University of Technology ; Heydarnoori, Abbas (Supervisor)
Abstract
Client applications are often developed with the help of software frameworks in order to reduce the development costs and to increase the software quality. However, frameworks may evolve to add new features or to fix bugs, and thus, their APIs may change at the same time. Nevertheless, these API changes can cause the client applications to not work properly. New frameworks typically use the deprecation mechanism to reduce this effect, but their documents often do not provide sufficient information. Consequently, deprecated APIs usages remain unresolved in client applications. To tackle this issue, we introduce ARFES (Automated Recommender of Framework Evolution Solutions) that provides...
A robust optimization approach for the production-inventory-routing problem with simultaneous pickup and delivery
, Article Computers and Industrial Engineering ; Volume 143 , May , 2020 ; Akbari Jokar, M. R ; Sharif University of Technology
Elsevier Ltd
2020
Abstract
The production routing problem (PRP) merges the lot-sizing problem and the vehicle routing problem, two classical problems that have been the focus of comprehensive studies for over half a century. Solving the PRP is an effort to optimize decisions about the production, inventory, distribution, and routing in an integrated manner. In the literature of the recent decade, due to economic changes and regulatory issues, reverse logistics has become a focal point. Subsequently, the vehicle routing problem with simultaneous pickup and delivery (VRPSPD) has drawn more and more attention for its considerable effect on the reverse logistics problem. In addition, one of the major arguments in supply...
Integration of Production-inventory-routing Problem with Simultaneous Pickup and Delivery and Robust Optimization Approach
, M.Sc. Thesis Sharif University of Technology ; Akbari Jokar, Mohammad Reza (Supervisor)
Abstract
PRP is a combination of two classic problems. First one is the lot-sizing and the second one is vehicle’s routing which have been studied for more than fifty years. The prp is solved in attempt to jointly optimize production, inventory, distribution, routing decision and as a result, it is a inventory-routing problem as a whole. Despite the fact that prp involves a complex instructor, both universities and industries have been so eager to this problem since last decade. In this thesis an integrated assessment of PRP and various technics for solving the problem have been discussed. Moreover, taking into account the structure, hypothesis, and the constraints of the problem, a...
Solving the P-Center Problem under Uncertainty
, M.Sc. Thesis Sharif University of Technology ; Shavandi, Hassan (Supervisor)
Abstract
Facility location decisions play a prominent role in strategic planning of many firms, companies and governmental organizations. Since in many real-world facility location problems, the data are subject to uncertainty, in this thesis, we consider the P-center problem under uncertainty of demand nodes. Using Bertsimas and Sim approach, we modeled the problem as a linear optimization model. Furthermore, we develop a tabu search algorithm to solve the problem. Finally we designed some experiments to adjust the parameters of tabu search algorithm. We presented the numerical result accordingly
Feyerabend’s Point of View on Scientific Progress
, M.Sc. Thesis Sharif University of Technology ; Taghavi, Mostafa (Supervisor)
Abstract
Feyarabend’s philosophy of science is against method and rule such that he believes that “anything goes”. However, he sometimes applies the term “progress”. Reviewing his publications shows that from his point of view, progress is qualitative and relative. So, unlike other philosophers of science Feyarabend ignores the clarification of the concept; subsequently, his applications of the term “progress” are somewhat ambiguous. However, by studying his philosophy, one may realize what should be done to achieve progress in any sense. The affirmative aspect of Feyerabend’s philosophy, while highlights the social and ethical elements, considering his humanitarian outlook as well as his special...
The concept of Social Ethics and Its Relation to the Politics from Hobbes Point of View
, M.Sc. Thesis Sharif University of Technology ; Taghavi, Mostafa (Supervisor)
Abstract
In this thesis, I study the concept of social ethics from a modern point of view. What I call modernity, is the fundamental philosophical revolution happened in the sixteenth and seventeenth centuries in Europe, this period is called “Enlightenment”, what I assume is from Machiavelli to Kant. One of the most important philosophers belongs to this enlightenment period is Thomas Hobbes, a Scottish philosopher whose main book “Leviathan” is well-known as the basis of the modern politics. Modern politics makes sense against classical one, founded by Aristotle in a book mentioned under the same title. What Hobbes describes as society based on public interests etc. is in a different point of view...
On Feenberg’s Alternative Thinking About Virtual Space Technologies
, M.Sc. Thesis Sharif University of Technology ; Taghavi, Mostafa (Supervisor)
Abstract
Cultural and social problems in the modern age have motivated many thinkers to analyze modernity. Some of them have tried to solve these problems and, if possible, prevent their occurrence in the future. Proposed solutions are mostly dystopian, i.e. by being disappointed, they think the only possible way to overcome these problems is to annihilate modern civilization, or they pursue a passive approach; i.e. they have accepted the problems of modernity but only seek a way to mitigate its challenges. Among these, solutions which try to make use of the capacities of the modern civilization, especially emerging technologies, are really scarce. These approaches seek to realize (and make...
Has "The Work and Technology Course" in the Elementary School and Guidance School Paid Enough Attention to Improve Technological Thinking?
, M.Sc. Thesis Sharif University of Technology ; Taghavi, Mostafa (Supervisor)
Abstract
It has been five years since the new education system was started, according to which fundamental changes have been applied to school text books. The mentioned changes in the text books are based on “the fundamental transformation document” and “Iran’s national educational curriculum”. In “Iran’s national educational curriculum”, eleven fields concerning pedagogy and learning are explicitly mentioned; one of these eleven fields is “training and learning work and technology”. One of the merits which has been stressed in this field, is “technological thinking”. Nowadays, methods of extending and reinforcing the technological thinking have come to be the subject of investigations in many...
Religious Science: Comparison of Golshani's and Javadi Amoli's Views
, M.Sc. Thesis Sharif University of Technology ; Taghavi, Mostafa (Supervisor)
Abstract
Religious science, its nature, possibility, and the mechanism of achievement have come to the fore in recent years. In this thesis, Javadi Amoli’s and Golshani’s theories are compared in this respect. Javadi Amoli begins by situating the reason, and certain knowledge as its product, in the architecture of religious knowledge. Since this kind of knowledge unveils divine action, Amoli counts it as already divine in nature. Therefore, there would be no conflict between science and religion in principle, unless atheist scientists insist on drawing non-empirical conclusions from sciences. Other conflicts too are superficial and resolvable. Amoli sees the fault of current sciences, which should be...
Explaining the Concept of Civilization by using Theory of Constructive Perceptions with Emphasis on Knowledge and Technology as Components of Civilization
, M.Sc. Thesis Sharif University of Technology ; Taghavi, Mostafa (Supervisor)
Abstract
The purpose of writing this thesis is to arrive at the concept of civilization. And in this process, using the constructive perception. My approach in constructive perception is different with approach of Allameh tabatabaei in constructive perception. In first chapter defining constructive perception as the perception that mind by analogy between two consepts makes the non-real relations and attributes it deliberated to the reality (the parties). Meanwhile, should have been constructive perception is the intermediary that stimulation our sense abut reality. These feelings can be tenderness or hatred or fear and hope and ... . In the second chapter we will show that the use of technology...
A memory efficient algorithm for multi-dimensional wavelet transform based on lifting
, Article 2003 IEEE International Conference on Accoustics, Speech, and Signal Processing, Hong Kong, 6 April 2003 through 10 April 2003 ; Volume 6 , 2003 , Pages 401-404 ; 15206149 (ISSN) ; Kasaei, S ; Sharif University of Technology
2003
Abstract
Conventional implementation of multi-dimensional wavelet transform (e.g. 3-D wavelet) requires whether a high amount of "in access" memory or a continual access to slow memory of a processor which makes it infeasible for most applications. In this paper, we proposed a novel algorithm for computation of an n-D discrete wavelet transform (DWT) based on lifting scheme. In addition to benefits of lifting scheme (which causes a major reduction in computational complexity and performs the total computations in time domain), our real-time approach computes the coefficients for all kinds of 1st and 2 nd generation wavelets with short delay and optimized utilization of the slow and fast memories of a...
Welding Metallurgy and Welding Feasibility of Low-Carbon Steel and Pure Copper in Resistance Spot Welding Process
, M.Sc. Thesis Sharif University of Technology ; Pouranvari, Majid (Supervisor)
Abstract
With the expansion of industry, steel to copper joints applications in heat and electricity transmission equipment have increased. Steel has better mechanical properties and weldability and lower prices, and copper has better thermal and electrical conductivity properties; because of that, this dissimilar joint fits needs such as cost reduction and high efficiency. This study has parametrically investigated the feasibility of dissimilar welding of these metals using the resistance spot welding process.This study conducts three phases. In the first phase, low carbon steel and copper were directly welded, and it was found that the mechanical properties of the joint were affected by physical...
The Study of the Steric and Electronic Effects on n → π* Interactions in a Series of New Rhenium (I)Tricarbonyl Complexes
, Ph.D. Dissertation Sharif University of Technology ; Kia, Reza (Supervisor)
Abstract
In this research, synthesis, structural and theoretical studies of new rhenium (I) tricarbonyl complexes with general formula, [Re(CO)3(NN)X] in which NN´ is chelating bidentate diimine ligand and X = Perrhenate, NO2 and ONO ligands were studied. The synthesized complexes were characterized by 1H-NMR, FT-IR and ESI-mass spectroscopic methods and their solid state structures were determined by X-ray diffraction analysis. Crystal structure determination by single-crystal X-ray diffraction allows us to fully examine the intramolecular and intermolecular interactions. The energy of different n → π* interactions also was investigated. Since three carbonyl groups are present in these complexes, we...
Examination and Critique of Susan George’s Ideas Concerning the Relation of Religion and Technology
, M.Sc. Thesis Sharif University of Technology ; Taghavi, Mostafa (Supervisor)
Abstract
This article investigate about Susan George’s ideas concerning the relation of religion and technology and examine her point of view. George, searches synergy between religion and technology and tries to develop basis of artificial intelligence by religion. She provide answers to some philosophical concerns about technology through religion and tries to prove that technological morality needs religion. We show that some of her Assumptions is not through her conclusions. George, notices to the help of technology to religion for providing a new expression. We examine her clams about relation between technology and Islam
Evaluation of efficiency in zinc recovery from waste materials
, Article 2006 TMS Fall Extraction and Processing Division: Sohn International Symposium, San Diego, CA, 27 August 2006 through 31 August 2006 ; Volume 1 , 2006 , Pages 445-452 ; 0873396332 (ISBN); 9780873396332 (ISBN) ; Halali, M ; Sharif University of Technology
2006
Abstract
In this report, the efficacy of different factors such as temperature of reaction, time of reaction and depth of bed are investigated in a process of recovery of zinc oxide from zinc ore concentration residues in a fluidized bed furnace. Under optimum conditions, there was more than 93.5% zinc oxide in products
Studies on recycling of zinc-containing waste
, Article REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology, Madrid, 26 September 2004 through 29 September 2004 ; 2005 , Pages 2797-2799 ; 8495520060 (ISBN) ; Halali, M ; Sharif University of Technology
2005
Abstract
In this report, the possibility of recovering zinc oxide from zinc containing wastes, also the effect of temperature, time and depth of bed on recycling has been studied. Zinc oxide with a purity of 93.5% was obtained
Iterative multiuser receiver for coded MC-FH multiple access systems in the presence of partial-band interference
, Article 2004 IEEE 60th Vehicular Technology Conference, VTC2004-Fall: Wireless Technologies for Global Security, Los Angeles, CA, 26 September 2004 through 29 September 2004 ; Volume 60, Issue 3 , 2004 , Pages 1899-1903 ; 15502252 (ISSN) ; Nasiri Kenari, M ; Sharif University of Technology
2004
Abstract
In this paper, we consider an iterative multiuser receiver for the coded MC-FH system, first introduced in [4], in the presence of partial-band interference. The structure of the receiver consists of two principal parts: multiuser soft input soft output (SISO) detector and SISO channel decoder. When the channel is under the attack of jamming, for optimum detection we propose to add a jamming estimator to multiuser SISO detector. So, the new SISO multiuser detector consists of multiuser likelihood calculator (MULC) and iterative jamming estimator (JE). The numerical results show that the proposed receiver works quite well compared to the ideal receiver which has the perfect channel state...
A Critical Assessment of Verbeek's Theory of Moralizing Technology
, M.Sc. Thesis Sharif University of Technology ; Taghavi, Mostafa (Supervisor)High Saline Water Treatment by the Process of Membrane Distillation Combined with Solar Energy
, M.Sc. Thesis Sharif University of Technology ; Rajabi, Abbas (Supervisor) ; Musavi, Abbas (Supervisor)
Abstract
In this study, membrane distillation process was used for treatment of high salinity waters. The focus of this study is to simulate and build a setup of membrane distillation process. Since the membrane distillation process is based on the driving force of the temperature difference, the required temperature is provided by both the use of heaters and the use of solar energy. To increase the feed temperature by solar energy, a black polymer coating on the main membrane is used. The main membrane used in this process is PVDF polymer and the polymer coated on the surface is the PAN polymer. After simulating and constructing the laboratory setup, the influence of a variety of parameters on the...