Sharif Digital Repository

Analyzing contact stress in rails and wheels are very important in mechanical and railway engineering. In this paper, new formulations of the contact stress are presented for two rolling bodies by exponential and power law forms semi-analytically. Innovative elastic wheel-rail contact models and FE Modeling are proposed. The present model assumes the collection of rail and wheel as elastic deformable bodies and needs numerical and novel analytical solutions. Results of this work are close to the Hertz Stress, previous published work and FEM results, in which good agreements are found among the results. So, we can rely on this method and their results. With this approach, suitable results... 

In this study, effects of geometric factors and material properties are investigated on stress behavior of circular rotating disk with constant rotation in various industrial mechanisms using equilibrium equations, geometric relations and stress functions. In this way, research on a thin uniform and homogeneous circular disk under constant rotation is considered. The rotating motion produces centrifugal acceleration on each element of the rotating disk, and this rotating motion becomes the source of external loading for the mentioned problem. Additional exterior loadings are not assumed in this problem. It is comfortable to handle the centrifugal force loading by relating it to a body force... 

Although more than half a century is passed since space technology was first developed, developing countries are just beginning to enter the arena, focusing mainly on educating professionals. Space technology by itself is an interdisciplinary science, is costly, and developing at a fast pace. Moreover, a fruitful education system needs to remain dynamic if the quality of education is the main concern, making it a complicated system. This paper makes use of the System Engineering Approach and the experiences of developed countries in this area while incorporating the needs of the developing countries to devise a comprehensive program in space engineering at the Master's level. The needs of... 

A viscoelastic microcantilever beam is analytically analyzed based on the modified strain gradient theory. Kelvin-Voigt scheme is used to model beam viscoelasticity. By applying Euler-Bernoulli inextensibility of the centerline condition based on Hamilton's principle, the nonlinear equation of motion and the related boundary conditions are derived from shortening effect theory and discretized by Galerkin method. Inner damping, nonlinear curvature effect, and nonlinear inertia terms are also taken into account. In the present study, the generalized derived formulation allows modeling any nonlinear combination such as nonlinear terms that arise due to inertia, damping, and stiffness, as well... 

In this paper a nonlinear dynamic model for drill string in inclined well drilling is developed. Effects of drilling mud flow rate, weight on bit, angular velocity along with viscous damping on stability and vibration of the drill string are studied. Findings indicate the nonlinear effects are significant on the results. The effects of drilling mud flow rate and weight on bit on the natural frequencies and time responses are evaluated. Enhancement of drilling mud flow rate results in decreasing of natural frequencies and vibrational amplitude, while increasing the weight on bit, leads to decrease of the natural frequencies and increase the vibrational amplitude. © JVE INTERNATIONAL LTD  

Analytical frequency analysis of a nonlinear viscoelastic microcantilever is performed based on strain gradient theory. The Kelvin–Voigt scheme is utilized to model the viscoelasticity effect. Due to the microcantilever shortening effect via Euler–Bernoulli inextensibility condition, geometric, inertia, stiffness, and inherent damping nonlinearities are considered. The equation of motion is derived from Hamilton’s principle, and discretized using Galerkin method. The multiple timescale perturbation method is performed to solve the time response equation. Implying steady-state condition, the nonlinear relation between detuning parameter and amplitude of the vibration of a nonlinear... 

In the recent years, many universities invest on cubesats to prepare an appropriate environment for their students to get their hands on real experiments including design, fabrication, test, launch, operation and analysis of a real satellite project. Now after 5 years of experimentation, it is time for leaders to define more practical goals beside training students. Orienting the budget that is annually being invested on such satellites in every country to a specific goal could be a driving force in opening a new chapter in the utilization of pico-satellites and the advantages they offer. As these tiny satellites are utilized based on low cost COTS and also are light weight enough to reduce... 

Comparison of the traditional linear heating method of TPD with an original stepwise heating scheme was reported for the first time. Stepwise heating TPD was carried out by keeping the temperature constant as soon as ammonia desorption signal rises until the signal returns to the baseline. More ammonia desorption peaks on a SAPO-34 catalyst were identified using TPD with stepwise heating. The effect of temperature ramp on desorption peak broadening in TPD curve was also addressed. The more distinct ammonia desorption peaks in stepwise TPD indicates that ammonia adsorbs in about five or six different ways on SAPO-34, and attribution of different adsorptions may be explained considering some... 

Most part of Iran is dominated by arid and semi-arid areas due to low annual rainfall. The need for production of fresh water from brackish water is considerably high, especially in dry regions. In this study 1 month daily-based experimental data from a solar still site has been reported. The technical and operational problems of this site which finally contributed to the total cease of the site are described. Then a detailed analysis is investigated on progress of a prototype which constructed in order to solve the site's problems. The results of 1 month of experimental data of the final design showed that the last prototype could be used to solve the current problems of the site. The... 

Hydrocracking is one of the most versatile petroleum refining processes for production of valuable products including gasoline, gas oil, and jet fuel. In this paper, a five-parameter continuous lumping model was used for kinetic modeling of hydrocracking of vacuum gas oil (VGO). The model parameters were estimated from industrial data obtained from a fixed bed reactor operating at an average temperature of 400°C and residence time of 0.3 h. Product distributions were obtained in terms of the weight fraction of various boiling point cuts. The model parameters were estimated using the Nelder-Mead optimization procedure and were correlated with temperature. Comparison of experimental and... 

Purpose - The purpose of this paper is to present an improved methodology for design of custom-made hip prostheses, through integration of advanced image processing, computer aided design (CAD) and additive manufacturing (AM) technologies. Design/methodology/approach - The proposed methodology for design of custom-made hip prostheses is based on an independent design criterion for each of the intra-medullary and extra-medullary portions of the prosthesis. The intra-medullar part of the prosthesis is designed using a more accurate and detailed description of the 3D geometry of the femoral intra-medullary cavity, including the septum calcar ridge, so that an improved fill and fit performance... 

In this letter, we propose a method for real-time high density impulse noise suppression from images. In our method, we first apply an impulse detector to identify the corrupted pixels and then employ an innovative weighted-average filter to restore them. The filter takes the nearest neighboring interpolated image as the initial image and computes the weights according to the relative positions of the corrupted and uncorrupted pixels. Experimental results show that the proposed method outperforms the best existing methods in both PSNR measure and visual quality and is quite suitable for real-time applications  

The disposal of used tires is a major environmental problem. With increasing interest on recovery of wastes, pyrolysis is considered as an alternative process for recovering some of the value in scrap tires. An accurate kinetic model is required to predict product yields during thermal or catalytic pyrolysis of scrap tires. Pyrolysis products contain a variety of hydrocarbons over a wide boiling range. A common approach for kinetic modeling of such complex systems is lumping where each lump is defined by a boiling point range. Available experimental data for thermal and catalytic pyrolysis of scrap tires from the literature were used to evaluate two types of lumping models; discrete and... 

Compared with flat linear structures, tubular linear machines do not face edge effects, making their performance better than their flat counterparts. In this article, a novel linear variable-reluctance resolver with tubular configuration is proposed. To optimize the design of an electromagnetic structure, modeling methods are used. Thus, in this article, an analytical model for the proposed resolver is presented. This model is based on the magnetic equivalent circuit (MEC) method and is considerably less time-consuming than finite element analysis (FEA), yet provides accurate results. A conformal mapping is employed to compute the permeance of the air-gap. The proposed model is then utilized... 

In Brukner and Zeilinger's interpretation of quantum mechanics, information is introduced as the most fundamental notion and the finiteness of information is considered as an essential feature of quantum systems. They also define a new measure of information which is inherently different from the Shannon information and try to show that the latter is not useful in defining the information content in a quantum object. Here, we show that there are serious problems in their approach which make their efforts unsatisfactory. The finiteness of information does not explain how objective results appear in experiments and what an instantaneous change in the so-called information vector (or catalog of... 

Low silicon content SAPO-34 was successfully synthesized using the conventional hydrothermal crystallization in the static condition. Effects of different synthesis conditions including crystallization temperature and the silicon source were investigated through X-ray diffraction patterns. It was concluded that the silicon source had a significant effect on silicon incorporation into the alumino-phosphate building blocks in the course of crystallization. Using precipitated silica instead of silica sol resulted in the formation of impurities of alumino-phosphates phases whose crystalline structures collapse at the high temperature of calcination. For the low silicon SAPO-34 synthesis, the...