Loading...
Search for: taheri--masoud
0.107 seconds

    To What Extent Do Oil Price Shocks Explain the Business Cylces of the Economy of Iran in a Dynamic Stochastic General Equilibrim Model Under New-Keynesian Assumptions?

    , M.Sc. Thesis Sharif University of Technology Taheri, Shamim (Author) ; Nili, Masoud (Supervisor)
    Abstract
    In this thesis, a dynamic stochastic general equilibrium model under new-Keynesian assumptions has been proposed for the economy of Iran, as a major oil-exporting economy. The economy is supposed to be inhabited by households, firms (both final-good and intermediate-good producing firms), a government and a monetary authority. It is exposed to stochastic and exogenous shocks to total factor productivity, oil export revenues and the growth rate of money. The most important features of the model, which distinguish it from most other proposed models for the economy of Iran, are the assumptions of the presence of monopolistic competition in intermediate-good producing firms and also a degree of... 

    Simulation of SO2 absorption in a venturi scrubber

    , Article Chemical Engineering Communications ; Volume 197, Issue 7 , Feb , 2010 , Pages 934-952 ; 00986445 (ISSN) Taheri, M ; Mohebbi, A ; Taheri, A ; Sharif University of Technology
    2010
    Abstract
    In this study, a three-dimensional mathematical model, based on a nonuniform droplet concentration distribution, has been developed to simulate gas absorption in a venturi scrubber. The mass transfer process was illustrated by assuming the liquid phase as a combination of droplets and film. The flow, just as the annular two-phase flow, includes a flow of liquid film layer on the walls and a flow of gas and liquid drops in the core. Peclet number was determined using experimental data reported by Viswanathan et al. (1984) for distribution of droplets across the cross section of the scrubber. The mathematical model for gas absorption was justified by comparing the theoretical predictions with... 

    The effect of prestrain temperature on kinetics of static recrystallization, microstructure evolution, and mechanical properties of low carbon steel

    , Article Journal of Materials Engineering and Performance ; Volume 27, Issue 5 , 2018 , Pages 2049-2059 ; 10599495 (ISSN) Akbari, E ; Karimi Taheri, K ; Karimi Taheri, A ; Sharif University of Technology
    Springer New York LLC  2018
    Abstract
    In this research, the samples of a low carbon steel sheet were rolled up to a thickness prestrain of 67% at three different temperatures consisted of room, blue brittleness, and subzero temperature. Microhardness, SEM, and tensile tests were carried out to evaluate the static recrystallization kinetics defined by the Avrami equation, microstructural evolution, and mechanical properties. It was found that the Avrami exponent is altered with change in prestrain temperature and it achieves the value of 1 to 1. 5. Moreover, it was indicated that prestraining at subzero temperature followed by annealing at 600 °C leads to considerable enhancement in tensile properties and kinetics of static... 

    An investigation on tensile properties of coiled carbon nanotubes using molecular dynamics simulation

    , Article Diamond and Related Materials ; Volume 74 , 2017 , Pages 154-163 ; 09259635 (ISSN) Shahini, E ; Karimi Taheri, K ; Karimi Taheri, A ; Sharif University of Technology
    Elsevier Ltd  2017
    Abstract
    A coiled carbon nanotube (CCNT) can be formed from the distortion of parent toroidal carbon nanotube with a uniform pitch length and a uniform spring rise angle. In this research molecular dynamics simulation was carried out to assess the tensile properties of three CCNT having indexes of (3,3), (4,4), and (5,5). The results indicated that Stone-Wales defects are necessary for thermodynamic stability of the CCNTs. The stress-strain curves showed that the yield stress, yield strain, and failure strain are decreased with increase in temperature. The force-displacement curves revealed that the spring constant of these materials is highly depended on the tube diameter and rising angle, while it... 

    Microstructural evolution, mechanical properties, and corrosion resistance of a heat-treated Mg alloy for the bio-medical application

    , Article Journal of Magnesium and Alloys ; Volume 7, Issue 1 , 2019 , Pages 80-89 ; 22139567 (ISSN) Janbozorgi, M ; Karimi Taheri, K ; Karimi Taheri, A ; Sharif University of Technology
    National Engg. Reaserch Center for Magnesium Alloys  2019
    Abstract
    During the recent years, some Mg based alloys have extensively been considered as a new generation of degradable and absorbable bio-medical materials. In this work, the Mg–2Zn–1Gd–1Ca (wt%) alloy as a new metallic bio-material was produced by the casting process followed by the heat treatment. The samples of the alloy were solution treated at temperatures of 500, 550, and 600 °C and then quench aged at temperatures of 125, 150, and 175 °C. The results of SEM-EDS examinations indicated that the alloy microstructure consists of α-Mg matrix and the Ca2Mg6Zn3 and Mg3Gd2Zn3 secondary phases. With regard to the results of Vickers hardness test, the temperatures of 500 °C and 150 °C were selected... 

    A study of hyperelastic models for predicting the mechanical behavior of extensor apparatus

    , Article Biomechanics and Modeling in Mechanobiology ; Volume 16, Issue 3 , 2017 , Pages 1077-1093 ; 16177959 (ISSN) Elyasi, N ; Karimi Taheri, K ; Narooei, K ; Karimi Taheri, A ; Sharif University of Technology
    Springer Verlag  2017
    Abstract
    In this research, the nonlinear elastic behavior of human extensor apparatus was investigated. To this goal, firstly the best material parameters of hyperelastic strain energy density functions consisting of the Mooney–Rivlin, Ogden, invariants, and general exponential models were derived for the simple tension experimental data. Due to the significance of stress response in other deformation modes of nonlinear models, the calculated parameters were used to study the pure shear and balance biaxial tension behavior of the extensor apparatus. The results indicated that the Mooney–Rivlin model predicts an unstable behavior in the balance biaxial deformation of the extensor apparatus, while the... 

    Impacts of socially assistive robots on improving the quality of life in children with autism

    , Article Encyclopedia of Child and Adolescent Health, First Edition ; Volume 1 , 2023 , Pages 99-125 ; 978-012818873-6 (ISBN); 978-012818872-9 (ISBN) Taheri, A ; Sharif University of Technology
    Elsevier  2023
    Abstract
    Statistics have shown an endemic worldwide increase of Autistic Spectrum Disorders (ASD) since the 1960s. Autistic disorders are characterized by three major behavioral disorders: impaired social interaction, impaired communication, and impaired imagination and social creativity. The usage of Socially Assistive Robots (SAR) in autism screening and treatment has been increasing in recent years. In this chapter, after reviewing the most important findings of using SAR in autism area, I present some of our recent findings on the clinical application of two interactive social humanoid robots (i.e., NAO and ALICE with the Iranian names of Nima and Mina) as medical assistants in the treatment and... 

    An investigation on microstructure evolution, mechanical properties, and strain aging of Mg-1.8Zn-0.7Si-0.4Ca biomedical alloy processed by equal channel angular pressing

    , Article Journal of Materials Engineering and Performance ; Volume 28, Issue 8 , 2019 , Pages 5207-5219 ; 10599495 (ISSN) Shaeri, M ; Karimi Taheri, K ; Karimi Taheri, A ; Shaeri, M. H ; Sharif University of Technology
    Springer New York LLC  2019
    Abstract
    The influence of equal channel angular pressing (ECAP) on microstructure and mechanical behavior, as well as, strain aging during ECAP and post-ECAP of Mg-1.8Zn-0.7Si-0.4Ca biomedical alloy was examined. The alloy in solid solution heat-treated condition was processed by ECAP with route BC at 350 and 400 °C. The specimens ECAPed at 350 °C were aged at 125 and 150 °C for different times. The hardness and shear punch test results indicated that performing ECAP at 350 °C for 4 passes increases the hardness and shear strength of the alloy from 48 HV and 110 MPa to 71 HV and 188 MPa, respectively. It was revealed that the average grain size of the alloy decreases from 78 µm to about 3 µm after 4... 

    The effect of deformation heating on restoration and constitutive equation of a wrought equiatomic NiTi alloy

    , Article Journal of Materials Engineering and Performance ; Volume 21, Issue 4 , April , 2012 , Pages 516-523 ; 10599495 (ISSN) Ahadi, A ; Karimi Taheri, A ; Karimi Taheri, K ; Sarraf, I. S ; Abbasi, S. M ; Sharif University of Technology
    2012
    Abstract
    In this study, a set of constitutive equation corrected for deformation heating is proposed for a near equiatomic NiTi shape memory alloy using isothermal hot compression tests in temperature range of 700 to 1000 °C and strain rate of 0.001 to 1 s -1. In order to determine the temperature rise due to deformation heating, Abaqus simulation was employed and varied thermal properties were considered in the simulation. The results of hot compression tests showed that at low pre-set temperatures and high strain rates the flow curves exhibit a softening, while after correction of deformation heating the softening is vanished. Using the corrected flow curves, the power-law constitutive equation of... 

    Long Term Effective Factors on House Price of Metropolises of Iran

    , M.Sc. Thesis Sharif University of Technology Moeeni, Safoura (Author) ; Nili, Masoud (Supervisor)
    Abstract
    The notable share of housing sector in GDP (approximately five percent) shows this sector’s relation with macroeconomic activities. On the other hand, House as an asset leads housing sector to be affected by monetary and fiscal variables. A dynamic panel data was used in this study to evaluate the relations between housing sector and some macroeconomic variables in metropolises of Iran. As results show, in long term growth of liquidity, GDP per capita and sharp ratio have positive effects, and land per capita has negative effect on housing price in metropolises of Iran. Price increases have not been equal in different cities. Inequality of land price between metropolises and between... 

    Estimating an Index of Iran’s Informal Economy in 1350-1386 With Concentration on the Impact of Government’s Intervention by EMIMIC Model (The Multiple Indicators-Multiple Causes Model and Error-Correction Model)

    , M.Sc. Thesis Sharif University of Technology Khandan, Abbas (Author) ; Nili, Masoud (Supervisor)
    Abstract
    In this research, an Index of Iran informal economy in response to the government interventions in credit, labor and product markets is stimated by EMIMIC model. To do this, first these interventions are measured using principal components analysis. In the model, the variables GDP and employment are used as indicators and taxation rates, government distortions in credit, labor and product markets, government expenditure, per capita income, unemployment and inflation as causes of the informal economy. We conclude these government interventions have affected Iran informal economy and their influence is more than indirect interventions influence such as taxation. The estimated index of Iran... 

    Water Quality Modeling of Urban Streams

    , M.Sc. Thesis Sharif University of Technology Soltani, Maryam (Author) ; Tajrishy, Masoud (Supervisor)
    Abstract
    With altering natural state and increasing impervious surfaces, traditional urbanization leads to deteriorating the environment and water catchments. During the years most efforts in order to control the urban runoff outflow, have been focused on quantity; and awareness about improving water quality has been raised just in the last few years and, which emphasizes on pollution source control. Standard water quality sampling methods are time consuming, expensive and because of sampling in broad geographic areas, difficult; however modeling is a more efficient way in assessing water quality and as worries about non-point source pollution grows, different kinds of models have been used to... 

    The Political Economy Aspects of the Redistributive Role of Government in a General Equilibrium Micro-founded Macro Model

    , M.Sc. Thesis Sharif University of Technology Zakeri, Hassan (Author) ; Nili, Masoud (Supervisor)
    Abstract
    The role of government in economy has been a controversial subject in economics. Lately, there has been some fundamental change in evaluating this subject. One could mention two of these as 1) realizing the importance of micro-founded macro model for evaluating policy, and 2) taking into consideration the rent-seeking behavior of politicians. In this research, a general equilibrium in a micro-founded macro model will be discussed and then in political economics framework, the effect of government on this equilibrium will be investigated. Only the redistribution role of government has been considered. First, the model in which a benevolent government is seeking optimal policy is Discussed.... 

    Measurement of Gini Coefficients by Means of Household’s Special CPI in Iran(1984-2005)

    , M.Sc. Thesis Sharif University of Technology Ghasemi, Mojtaba (Author) ; Nili, Masoud (Supervisor)
    Abstract
    Gini coefficient is the most prevalent index for the measurement of inequality and is usually extracted by means of nominal variables based on income or expenditures of households. In this study we have extracted more accurate Gini coefficients. By using the raw data of Households Budget Survey (HBS) and STATA software, a special CPI for each household of the sample is extracted. Subsequently nominal expenditures are deflated by these special CPIs, and at last, Gini coefficients are extracted from real expenditures. Our findings indicate that in recent years, extracted Gini coefficients are remarkably higher than prevailing ones.
     

    Parametric Evaluation of the Y- Shaped Bracing Frame and Introducing a New Method for Design

    , M.Sc. Thesis Sharif University of Technology Sedaghati, Parshan (Author) ; Mofid, Masoud (Supervisor)
    Abstract
    This paper investigates the behavior of the Y-shaped bracing system. Because of the special type of eccentricity in this system, the behavior of the frame is strongly dependent on the geometrical changes of the braces. So that even in the elastic region, it shows the geometrically nonlinear behavior. The amount of eccentricity is very effective on the nonlinear behavior of the frame. Also the ratio of cross sections of the bracing members has a very important impact on the expected performance of the frame. The results show that this system tolerates large displacements, and can act like a base isolation system. Firstly, using a two-dimensional accurate modeling related to the geometrical... 

    Assessment of Seismic Behavior Factor of Irregular Midrise Steel Structure

    , M.Sc. Thesis Sharif University of Technology Baghi, Alireza (Author) ; Mofid, Masoud (Supervisor)
    Abstract
    The Overstrength, Ductility and the Response Modification Factor (R) for 70 steel X-braced , Inverted-V-Braced and Offcenter Bracing System frames were evaluated by performing pushover analysis of model structure with various stories (3,6,9,12&15 story) and span length (4,6&8 meter). Some result were compared with those from nonlinear dynamic analysis. According to the analysis result the R factors obtained from nonlinear dynamic analysis are 15% more than obtained from pushover analysis and R factors computed from pushover analysis were generally smaller than the values given in the design codes. R factors in Irregular structure in height are about 90% of R values in regular structure in... 

    Synthesis of γ-Fe2O3 Nanoparticles by Gelatin Mediator and Synthesis of γ-Fe2O3/SiO2/PCA/Ag-NPs Nanostructure Drug Delivery System

    , M.Sc. Thesis Sharif University of Technology Masoud, Nazila (Author) ; Pourjavadi, Ali (Supervisor)
    Abstract
    Maghemite (γ-Fe2O3) nanoparticles were produced after high temperature oxidation of gelatin-Fe3O4 nanocomposite, obtained from a common coprecipitation process of Fe2+ and Fe3+ ions in an alkaline medium in the presence of a gelatin protein as an effective mediator. Size, shape, surface morphology and magnetic properties of the prepared γ-Fe2O3 nanoparticles were characterized using XRD, FTIR, TEM, SEM and VSM data. The results revealed that primary, gelatin-Fe3O4 nanocomposite had been formed and next, the gelatin decomposition in furnace produced a spinel structure of γ-Fe2O3. The effects of furnace temperature and time of heating together with the amount of gelatin on the produced... 

    On The Behavior of Low-Rise, Irregular, Dual Structures

    , M.Sc. Thesis Sharif University of Technology Khazaei, Siamak (Author) ; Mofid, Masoud (Supervisor)
    Abstract
    The Response modification factor R represents the behavior of the structure such as ductility, overstrength and the inherent redundancy. This factor shall be defined according to the type of lateral force resisting system. However, there are some complexities and/or uncertainties in codes related to the R factor according to the height, form of irregularities and structural systems. Therefore, from the scientific point of view as well as reliability, it is very clear that the R factor cannot be similar for all kinds of structures, categorized as a specific group. In this investigation, assuming a low-rise, vertically irregular structure with a heliport which has a dual structural system... 

    Modeling Phosphorous Movement in Watersheds with SWAT (Case Study: Kan Watershed)

    , M.Sc. Thesis Sharif University of Technology Delkash, Majid (Author) ; Tajrishy, Masoud (Supervisor)
    Abstract
    Maintaining the quality of water is of paramount importance for lakes with tourist attraction capacity. Inaccurate prediction of the quality state of lake in design phase may lead to some trouble in future. Kan River known as the main source of water feeding for the urban lake located in the north of Chitgar park passes through various villages and restaurants discharging nutrients via runoff and wastewater in the aforementioned river. Previous investigations reveal that phosphorous plays a central role in the water quality of this river and the associated downstream lake. In this research, Kan watershed,located in in the north-west of Tehran, was simulated. Considering the "Total Maximum... 

    The Role of Socio-Political Institutions in Economic Performance of Developing Countries

    , M.Sc. Thesis Sharif University of Technology Mollaei, Yaser (Author) ; Nili, Masoud (Supervisor)
    Abstract
    Findings of economics in last decade shows that social and economic institutions have direct influence on economic performance of a society. However, these institutions are determined by the state. In different regimes, the political power is in the hand of different social groups with different preferences and goals; as a result, different social and economic policies and institutions are take place in different political regimes. In this research, we study economic performance of a society under control of two different political regimes: in first, the majority rules the state and in second, there is a totalitarian regime in which; the political power is concentrated in hand of a group of...