Loading...
Search for: tajik--parham
0.071 seconds

    An algorithm for finding a feasible solution of graph labeling problems [electronic resource]

    , Article Utilitas Mathematica Publishing Incorporated ; 2007, Vol. 72, pp. 163-174 Eshghi, K. (Kourosh) ; Azimi, Parham ; Sharif University Of Technology
    Abstract
    Graceful labeling is one of the best known labeling methods of graphs. Despite the large number of papers published on the subject of graph labeling, there are few particular techniques to be used by researchers to gracefully label graphs. In this paper, first a new approach based on the mathematical programming technique is presented to model the graceful labeling problem. Then a “branching method” is developed to solve the problem for special classes of graphs. Computational results show the efficiency of the proposed algorithm for different classes of graphs. One of the interesting results of our model is in the class of trees. The largest tree known to be graceful has at most 27 vertices... 

    Applications of mathematical programming in graceful labeling of graphs [electronic resource]

    , Article Journal of Applied Mathematics (Published by Hindawi) ; Vol. 10, No. 10, pp. 1-8 Eshghi, K. (Kourosh) ; Azimi, Parham ; Sharif University of Technology
    Abstract
    Graceful labeling is one of the best known labeling methods of graphs. Despite the large number of papers published on the subject of graph labeling, there are few particular techniques to be used by researchers to gracefully label graphs. In this paper, first a new approach based on the mathematical programming technique is presented to model the graceful labeling problem. Then a “branching method” is developed to solve the problem for special classes of graphs. Computational results show the efficiency of the proposed algorithm for different classes of graphs. One of the interesting results of our model is in the class of trees. The largest tree known to be graceful has at most 27 vertices... 

    Fault Modeling of Transient Faults in Embedded Processors

    , M.Sc. Thesis Sharif University of Technology Tajik, Hossein (Author) ; Ejlali, Alireza (Supervisor)
    Abstract
    Many embedded processors are used in harsh environments and their behavior should be investigated against the incidence of common faults. Fault Injection is a prevalent method to do this investigation. Simulation-based fault injection is one of the most prominent forms of fault injection. A fault model is required to do simulation-based fault injection. Simulated faults should have the most similarity to the real faults. Temperature variation and in the extreme case thermal shock is one of the probable faults in harsh environment. In this thesis, we want to propose fault models for thermal shock in various abstraction levels, evaluate and compare these fault models and present methods to use... 

    DC to 40-GHz compact single-layer crossover

    , Article IEEE Microwave and Wireless Components Letters ; Volume 28, Issue 8 , 2018 , Pages 642-644 ; 15311309 (ISSN) Tajik, A ; Fakharzadeh, M ; Mehrany, K ; Sharif University of Technology
    Institute of Electrical and Electronics Engineers Inc  2018
    Abstract
    In this letter, a compact, wideband, and fully planar microstrip crossover structure is proposed. This design is based on a compact microstrip to coplanar waveguide transition, which has a measured bandwidth extending from dc to 40 GHz. At 20 GHz, the measured insertion loss, return loss, and isolation are better than 0.35, 21, and 19 dB, respectively. This circuit is ultracompact with the core size of 3 mm ×3 mm, which is 0.2λ×0.2 λ at 20 GHz. © 2012 IEEE  

    Factors Explaining the Intention of Iranian Apparel Smes to Initiate Export and Internationalization

    , M.Sc. Thesis Sharif University of Technology Tajik, Mohammad Hossein (Author) ; Kiamehr, Mahdi (Supervisor)
    Abstract
    Researches on internationalization and export have categorized all factors as internal and external and most of them try to explain this behavior by studying external factors. Recent study in this field have shown that simply promoting specific behavior is not enough, and it is important to try to change the attitudes of managers toward internationalization. Utilizing Theory of Planned Behavior (TPB), this research tries to understand the relationship between attitudes of managers and internationalization behavior of an organization. the explicit objective of this research is to determine the factors which influence the organization behavior on internationalization (specifically indirect... 

    Asymmetrical 4×4 butler matrix and its application for single layer 8×8 butler matrix

    , Article IEEE Transactions on Antennas and Propagation ; Volume 67, Issue 8 , 2019 , Pages 5372-5379 ; 0018926X (ISSN) Tajik, A ; Shafiei Alavijeh, A ; Fakharzadeh, M ; Sharif University of Technology
    Institute of Electrical and Electronics Engineers Inc  2019
    Abstract
    The design procedure and measured results of a novel 4 × 4 Butler matrix are presented in this paper. This asymmetrical structure provides fairly flexible phase outputs; therefore, the array radiation pattern can be rotated around the array normal axis. The structure of this modified Butler matrix is discussed in detail, and the explicit design formulas are derived to achieve the arbitrary main beams direction. Using the proposed design procedure, the Butler matrix can provide even broadside and endfire beams. In addition, this structure is employed to design two Butler matrices, which generate similar patterns as a conventional 8 × 8 Butler matrix, using only single layer circuits with... 

    Dual Band Millimeter Wave Butler Matrix Design for 5G Mobile Communication using CRLH

    , M.Sc. Thesis Sharif University of Technology Tajik, Ali (Author) ; Mehrany, Khashayar (Supervisor) ; Fakharzadeh, Mohammad (Co-Supervisor)
    Abstract
    In this thesis, study of some kinds of dual band transmission lines and structures are investigated. Attention to 3 important kinds, CRLH, SCRLH and the equal phase line are introduced and the formulations of each one are derived and considered. Also the method of designing these lines are attached. These lines form a complete category that makes the ability of designing all kind of dual band line with arbitrary frequencies and result phases with arbitrary non-integer ratio less or more than 1. Also an important attention is paid for the designing these lines in the microstrip configuration. Various kinds of Dual band structures are proposed at the last part of the introducing each lines.... 

    Design and Prototype Fabrication of a Palm Tree Climbing Robot for Pruning and Picking Crops

    , M.Sc. Thesis Sharif University of Technology Hatami Tajik, Mohammad Javad (Author) ; Alasty, Aria (Supervisor)
    Abstract
    Considering the importance of maintaining palm trees, this research focuses on the design of a climbing robot utilizing wheels. The goals of this robot include easy installation on the tree, climbing despite variations in trunk diameter and surface irregularities, maintaining static balance to prevent falling in a stationary state, and enabling tree pruning. Additionally, descending from the tree is an essential capability of this robot. For climbing, a rotating wheel and four auxiliary wheels are employed. A motor with a gearbox drives the rotating wheel, while the auxiliary wheels, supported by spring-lock mechanisms, provide the necessary force to prevent slipping and ensure stable... 

    Simple, Cost-effective, and continuous 3D dielectrophoretic microchip for concentration and separation of bioparticles

    , Article Industrial and Engineering Chemistry Research ; Volume 59, Issue 9 , 2020 , Pages 3772-3783 Tajik, P ; Saidi, M. S ; Kashaninejad, N ; Nguyen, N. T ; Sharif University of Technology
    American Chemical Society  2020
    Abstract
    Dielectrophoresis is a robust approach for manipulating bioparticles in microfluidic devices. In recent years, many groups have developed dielectrophoresis-based microfluidic systems for separation and concentration of various types of bioparticles, where the gradient of the electric field causes dielectrophoresis force acting on the suspended particles. Enhancing the gradient of the electric field with three-dimensional (3D) electrodes can significantly improve the efficiency of the system. Implementing planar electrodes in a 3D arrangement is a simple option to form a 3D-electrode configuration. This paper reports the development of a novel dielectrophoretic microfluidic system for... 

    Design and Fabrication of a Microfluidic Chip for Live and Dead Cell Separation

    , M.Sc. Thesis Sharif University of Technology Tajik, Parham (Author) ; Firouzbakhsh, Keykhosrow (Supervisor) ; Saeedi, Mohammad Saeed (Supervisor)
    Abstract
    The recent breakthroughs in the lab-on-a-chip technology will not be directly used as clinical devices unless the specific applications are carefully tested and certified. As there is a growing trend towards microfluidic devices for biomedical research, an active microfluidic device was developed. Common microfabrication methods were used to develop a microchip to separate and concentrate live and dead cells based on the dielectrophoresis phenomenon. Unique capabilities of the dielectrophoresis phenomenon make it a powerful tool for micro particle manipulation in micro scale. In this research, geometry for the mentioned purpose is designed and optimized. Three-dimensional microelectrodes are... 

    Expand the shares together: envy-free mechanisms with a small number of cuts

    , Article Algorithmica ; 2018 ; 01784617 (ISSN) Seddighin, M ; Farhadi, M ; Ghodsi, M ; Alijani, R ; Tajik, A. S ; Sharif University of Technology
    Springer New York LLC  2018
    Abstract
    We study the problem of fair division of a heterogeneous resource among strategic players. Given a divisible heterogeneous cake, we wish to divide the cake among n players to meet these conditions: (I) every player (weakly) prefers his allocated cake to any other player’s share (such notion is known as envy-freeness), (II) the allocation is dominant strategy-proof (truthful) (III) the number of cuts made on the cake is small. We provide methods for dividing the cake under different assumptions on the valuation functions of the players. First, we suppose that the valuation function of every player is a single interval with a special property, namely ordering property. For this case, we... 

    Expand the shares together: envy-free mechanisms with a small number of cuts

    , Article Algorithmica ; Volume 81, Issue 4 , 2019 , Pages 1728-1755 ; 01784617 (ISSN) Seddighin, M ; Farhadi, M ; Ghodsi, M ; Alijani, R ; Tajik, A. S ; Sharif University of Technology
    Springer New York LLC  2019
    Abstract
    We study the problem of fair division of a heterogeneous resource among strategic players. Given a divisible heterogeneous cake, we wish to divide the cake among n players to meet these conditions: (I) every player (weakly) prefers his allocated cake to any other player’s share (such notion is known as envy-freeness), (II) the allocation is dominant strategy-proof (truthful) (III) the number of cuts made on the cake is small. We provide methods for dividing the cake under different assumptions on the valuation functions of the players. First, we suppose that the valuation function of every player is a single interval with a special property, namely ordering property. For this case, we... 

    A novel noise immune, Fuzzy approach to speaker independent, isolated word speech recognition

    , Article 2006 World Automation Congress, WAC'06, Budapest, 24 June 2006 through 26 June 2006 ; 2006 ; 1889335339 (ISBN); 9781889335339 (ISBN) Halavati, R ; Shouraki, S. B ; Razaghpour, M ; Tajik, H ; Cholakian, A ; Sharif University of Technology
    IEEE Computer Society  2006
    Abstract
    This paper presents a novel approach to isolated word speech recognition using fuzzy modeling which is specifically designed to ignore noise. The task is based on conversion of speech spectrogram into a linguistic fuzzy description and comparison of this representation with fuzzy linguistic descriptions of words. The method is tested on single speaker and multiple speaker tests and the results are compared with a widely used speech recognition approach, showing much higher noise resistance. Copyright - World Automation Congress (WAC) 2006  

    A novel approach to very fast and noise robust, isolated word speech recognition

    , Article 18th International Conference on Pattern Recognition, ICPR 2006, Hong Kong, 20 August 2006 through 24 August 2006 ; Volume 3 , 2006 , Pages 190-193 ; 10514651 (ISSN); 0769525210 (ISBN); 9780769525211 (ISBN) Halavati, R ; Bagheri Shouraki, S ; Tajik, H ; Cholakian, A ; Razaghpour, M ; Sharif University of Technology
    2006
    Abstract
    A novel very light weight approach to isolated word speech recognition is introduced. The approach uses a new simplistic feature set and a neural network recognition system. The algorithm's main processing requirements are FFT computation and a simple neural network comparison, making the method a suitable solution for low price embedded devices. The proposed method is tested on single speaker and multiple speaker test sets and the results are compared with a widely used speech recognition approach, presenting very fast recognition and quite good recognition rate. © 2006 IEEE  

    Envy-free mechanisms with minimum number of cuts

    , Article 31st AAAI Conference on Artificial Intelligence, AAAI 2017, 4 February 2017 through 10 February 2017 ; 2017 , Pages 312-318 Alijani, R ; Farhadi, M ; Ghodsi, M ; Seddighin, M ; Tajik, A. S ; Amazon; Artificial Intelligence; Baidu; et al.; IBM; Tencent ; Sharif University of Technology
    AAAI press  2017
    Abstract
    We study the problem of fair division of a heterogeneous resource among strategic players. Given a divisible heterogeneous cake, we wish to divide the cake among n players in a way that meets the following criteria: (I) every player (weakly) prefers his allocated cake to any other player's share (such notion is known as envy-freeness), (II) the mechanism is strategy-proof (truthful), and (III) the number of cuts made on the cake is minimal. We provide methods, namely expansion process and expansion process with unlocking, for dividing the cake under different assumptions on the valuation functions of the players. Copyright © 2017, Association for the Advancement of Artificial Intelligence...