Loading...
Search for:
tashi--s
0.111 seconds
Total 11002 records
The sliding frictional contact problem in two dimensional graded materials loaded by a flat stamp
, Article Advanced Materials Research, 7 January 2012 through 8 January 2012 ; Volume 463-464 , January , 2012 , Pages 336-342 ; 10226680 (ISSN) ; 9783037853634 (ISBN) ; Adibnazari, S ; Tashi, S ; Sharif University of Technology
2012
Abstract
In this article, the sliding frictional contact problem for a half-plane which is graded in two dimensions is studied. The effect of medium properties gradient and coefficient of friction in contact mechanics of two dimensional (2D) graded materials which is loaded by a flat stamp have been investigated by developing two Finite Element (FE) models, in macro and micro scales. Discretizing the graded half-plane by quadrants for whose material properties are specified at the centroids by Mori-Tanaka method in both directions has been used to model the 2D FGM in macro scale. In micro scale, the ideal solid quadrant particles which are spatially distributed in a homogeneous matrix used to model...
A comprehensive 2 Dimensional and 3 Dimensional FEM study of scarf repair for a variety of common composite laminates under in-plane uniaxial and equibiaxial loadings
, Article International Journal of Adhesion and Adhesives ; Volume 114 , 2022 ; 01437496 (ISSN) ; Abedian, A ; Sharif University of Technology
Elsevier Ltd
2022
Abstract
Due to their potential to recover strength and stiffness with a minimum impact on aerodynamic performance of a damaged structure, scarf repairs are boosted as a viable repair option for primary aero-structures. So far, most of the experimental and numerical studies have been limited to joint specimens and their equivalent 2 Dimensional models and a few number of studies attempted to examine the results using real scarf repair geometry. Suggestions previously made to justify the difference between scarf joint and scarf repair strength and possible solution to diminish the difference are challenged in current work. Here, it is tried to investigate the strengths and shortcomings of 2D scarf...
Investigation of Damage and Wearing Mechanism of Aircraft Structural Components
, M.Sc. Thesis Sharif University of Technology ; Abedian, Ali (Supervisor)
Abstract
Damage detection by Piezoelectric Wafer Active Sensors is one of the emerging efficient and dominant Structural Health Monitoring (SHM) methods. These sensors assess the health state of the structure due two strategies: a) near-field damage detection, b) far-field damage detection. The far-field damage detection is based on the high frequency Lamb wave propagation. As wave travels in a damaged structure, phase and amplitude of the wave will be changed. So comparison of the received signal from the pristine structure with damaged structure can give useful information about the health state of the structure. As PWAS is the essential part of this method, simulation and modeling of this sensors...
A FEM Investigation on the Performance Improvement of Design Parameters and Constraints of Scarf Joints For Primary Composite Aero-Structures
, Ph.D. Dissertation Sharif University of Technology ; Abedian, Ali (Supervisor)
Abstract
Due to their potential to recover strength and stiffness with a minimum impact on aerodynamic performance of a damaged structure, scarf repairs are boosted as a viable repair option for primary aero-structures. However, due to the contradictory effect of the scarf angle on satisfying the airworthiness criteria for adhesively repaired structure, including the Design Limit Load and the Design Ultimate Load, certifying an adhesively scarf repair for primary airframes is a sophisticated and in some cases impossible process. So far, most of the experimental and numerical studies have been limited to joint specimens and their equivalent 2 Dimensional models and a few number of studies attempted to...
The influence of grain size and grain size distribution on sliding frictional contact in laterally graded materials
, Article Mechatronics and Applied Mechanics, Hong Kong, 27 December 2011 through 28 December 2011 ; Volume 157-158 , 2012 , Pages 964-969 ; 16609336 (ISSN); 9783037853801 (ISBN) ; Adibnazari, S ; Tashi, S ; 2011 International Conference; on Mechatronics and Applied Mechanics, ICMAM2011 ; Sharif University of Technology
2012
Abstract
The sliding frictional contact problem for a laterally graded half-plane has been considered. Two finite element (FE) models, in macro and micro scales have been developed to investigate the effective parameters in contact mechanics of laterally graded materials loaded by flat and triangular rigid stamps. In macro scale model, the laterally graded half-plane is discretized by piecewise homogeneous layers for which the material properties are specified at the centroids by Mori-Tanaka method. In micro scale model, functionally graded material (FGM) structure has been modeled as ideal solid quadrant particles which are spatially distributed in a homogeneous matrix. Boundary conditions and...
The Effect of Different Parameters on the Production of High Alumina Cetzp Al2o3 Nano Composite Produced by Aqueous Combustion Synthesis
, M.Sc. Thesis Sharif University of Technology ; Yoozbashizadeh, Hossein (Supervisor) ; Askari, Masoud (Co-Advisor)
Abstract
Combustion synthesis is the best and most effective method for producing ceramic nano-composites which is also a simple and economic way of producing very fine powders with high purity. In this method, a series of combustion reactions named aqueous combustion analysis are used for producing single-phase and nano-composite products ,in which the heat produced in reactions are used for completing the phase . several chemical substances such as glycine ,urea ,ammonium acetate and others are used as combustion agents. In order to obtain optimized nano fuel, we produced alumina powder with multiple combustion percentages and composition of 25%moli ammonium acetate (AA) with 75%moli urea was...
The finite element simulation of lamb wave propagation in a cracked structure with coupled filed elements
, Article Advanced Materials Research, 7 January 2012 through 8 January 2012 ; Volume 463-464 , January , 2012 , Pages 618-623 ; 10226680 (ISSN) ; 9783037853634 (ISBN) ; Abedian, A ; Khajehtourian, R ; Singapore Institute of Electronics (SIE); Science and Engineering Institute (SCIEI) ; Sharif University of Technology
2012
Abstract
Crack detection by Piezoelectric Wafer Active Sensors (PWAS) is one of the emerging methods of Non-destructive Evaluation (NDE). These sensors can assess the health state of the structure in far filed through the analyzing the high frequency Lamb wave propagation. As PWAS is the essential part of this method, simulation and modeling of these sensors and their interaction with the host structure, strongly affect the accuracy of results. In this study, unlike the previous works, in which some certain areas of the host structure were considered as a sensor and actuator, the direct simulation of electro-mechanical interaction of the PWAS and the host structure is modeled among modeling the PWAS...
The relationship between an EFL teacher's gender and students' willingness to communicate
, Article International Journal of Communication and Linguistic Studies ; Volume 10, Issue 4 , 2013 , Pages 17-29 ; 23277882 (ISSN) ; Pakzadian, S. S
Common Ground Publishing
2013
Abstract
Learning a foreign language encompasses a process of trial and error that can lead to the progression of the learner's interlanguage, meaning that the learners make use of their language knowledge that receives feedback and brings about progress through diagnosis of the problems and being corrected by the teacher. Therefore, there exists a need to analyze the underlying reasons causing the students to remain taciturn with a low willingness to communicate (WTC) during a language class. There has been much work done investigating the role of the learner's stable personal characteristics (traits) along with their situational changes at a specific time (states) that influence the student's...
An automated simple algorithm for realistic pore network extraction from micro-tomography images
, Article Journal of Petroleum Science and Engineering ; Vol. 123, issue , 2014 , pp. 164-171 ; ISSN: 09204105 ; Jamshidi, S ; Salehi, S
2014
Abstract
Using 3-D scanned data to analyze and extract pore network plays a vital role in investigation of porous media's characteristics. In this paper, a new simple method is developed to detect pores and throats for analyzing the connectivity and permeability of the network. This automated method utilizes some of the common and well-known image processing functions which are widely accessible by researchers and this has led to an easy algorithm implementation. In this method, after polishing and quality control of images, using city-block distance function and watershed segmentation algorithm, pores and throats are detected and 3-D network is produced. This method can also be applied on 2-D images...
Discrimination of heart arrhythmias using novel features in heart rate phase space
, Article Computing in Cardiology ; Volume 40 , Sept , 2013 , Pages 1035-1038 ; 23258861 (ISSN); 9781479908844 (ISBN) ; Rezaei, S ; Salavatian, S
2013
Abstract
In this paper, we try to recognize and distinguish different groups of arrhythmia using novel features which have been obtained from the heart rate's phase space in recent years. For this purpose, we used Triangular Phase Space Mapping (TPSM) and Parabolic Phase Space Mapping (PPSM). For recognition, we used three groups of 15 subjects using the Physionet database (Arrhythmia, Congestive Heart Failure (CHF), and Atrial Fibrillation (AF)) with Normal Sinus Rhythm (NSR). The obtained features discriminate arrhythmia from NSR by p
An intelligent hybrid classification algorithm integrating fuzzy rule-based extraction and harmony search optimization: Medical diagnosis applications
, Article Knowledge-Based Systems ; Volume 220 , 2021 ; 09507051 (ISSN) ; Abdullah, S ; Akhavan Niaki, S. T ; Banihashemi, S ; Sharif University of Technology
Elsevier B.V
2021
Abstract
Uncertainty is a critical factor in medical datasets needed to be overcome for increasing diagnosis efficiency. This paper proposes an intelligent classification algorithm comprising a fuzzy rule-based approach, a harmony search (HS) algorithm, and a heuristic algorithm to classify medical datasets intelligently. Two fuzzy approaches, as well as orthogonal and triangular fuzzy sets, are first utilized to define the attributes of data. Then, an HS algorithm is integrated with a heuristic to generate fuzzy rules to select the best rules in the fuzzy rule-based systems. Moreover, to improve the performance of the proposed classification approach, a three-phase parameter tuning approach is...
Performance evaluation of shared hosting security methods
, Article Proc. of the 11th IEEE Int. Conference on Trust, Security and Privacy in Computing and Communications, TrustCom-2012 - 11th IEEE Int. Conference on Ubiquitous Computing and Communications ; 2012 , Pages 1310-1315 ; 9780769547459 (ISBN) ; Arshad, S ; Khoshkdahan, S ; Sharif University of Technology
2012
Abstract
Shared hosting is a kind of web hosting in which multiple websites reside on one webserver. It is cost-effective and makes the administration easier for websites' owners. However, shared hosting has some performance and security issues. In default shared hosting configuration, all websites' scripts are executed under the webserver's user account regardless of their owners. Therefore, a website is able to access other websites' resources. This security problem arises from lack of proper isolation between different websites hosted on the same webserver. In this survey, we have examined different methods for handling mentioned security issue. Also we evaluated the performance of mentioned...
The behaviour of an artificially cemented sandy gravel
, Article Geotechnical and Geological Engineering ; Volume 23, Issue 5 , 2005 , Pages 537-560 ; 09603182 (ISSN) ; Hosseini, S. M ; Toll, D. G ; Yasrebi, S. S ; Sharif University of Technology
2005
Abstract
The major section of the city of Tehran, Iran has been developed on cemented coarse-grained alluvium. This deposit consists of gravely sand to sandy gravel with some cobbles and is dominantly cemented by carbonaceous materials. In order to understand the mechanical behaviour of this soil, a series of undrained triaxial compression tests and unconfined compression tests were performed on uncemented and artificially cemented samples. Portland cement type I was used as the cementation agent for preparing artificially cemented samples. Uncemented samples and lightly cemented samples (1.5% cement) tested at high confining pressure showed contractive behaviour accompanied with positive excess pore...
An imperialist competitive algorithm approach for multi-objective optimization of direct coupling photovoltaic-electrolyzer systems
, Article International Journal of Hydrogen Energy ; Vol. 39, Issue 33 , 11 November , 2014 , pp. 18743-18757 ; ISSN: 03603199 ; Sayedin, F ; Khavas, S. S
2014
Abstract
In the context of sustainable clean hydrogen production pathways, photovoltaic-electrolyzer systems are one of the most promising alternatives for acquiring hydrogen from renewable energy sources. In fact, determining the optimal set of design and operating variables are always a key issue while coupling directly renewable electricity sources to PEM electrolyzers. Few previous studies have attempted to find the optimal size and operational condition of directly coupled photovoltaic-electrolyzer (PV/El) systems in order to maximize the hydrogen production or to minimize energy transfer loss between photovoltaic devices and the electrolyzer. Nevertheless an easy and efficient approach still...
Kalman filter based packet loss replacement in presence of additive noise
, Article 2012 25th IEEE Canadian Conference on Electrical and Computer Engineering: Vision for a Greener Future, CCECE 2012 ; 2012 ; 9781467314336 (ISBN) ; Ghorshi, S ; Tahaei, A
2012
Abstract
A major problem in real-time packet-based communication systems, is misrouted or delayed packets which results in degraded perceived voice quality. If packets are not available on time, the packets are considered as lost. The easiest solution in a network terminal receiver is to replace silence for the duration of lost speech segments. In a high quality communication system, to avoid degradation in speech quality due to packet loss, a suitable method or algorithm is needed to replace the missing segments of speech. In this paper, we introduce an adaptive filter for replacement of lost speech segment. In this method Kalman filter as a state-space based method will be used to predict the...
Investigation of Mesh Sensitivity Influence to Determine Crack Characteristic by Finite Element Methods
, Article Journal of Failure Analysis and Prevention ; Volume 16, Issue 3 , 2016 , Pages 506-512 ; 15477029 (ISSN) ; Mirjavadi, S. S ; Asli, S. A ; Sharif University of Technology
Springer New York LLC
2016
Abstract
In this research, an extended finite element model has been investigated. Investigation of opening and closure stress always has been one of the difficult parameters to analysis of results; therefore, the utilization of finite element methods would be a good and logical alternative for this purpose. In addition, linear elastic fracture criteria are used for validation of numerical results from the simulation. In this work, a detailed analysis of the influence of different parameters in the results of a specific specimen with a semi-elliptical tooling groove in terms of closure and opening stress is presented, and the impact of optimum element size in fracture characteristic in various load...
Investigation of the effect of nanosilica on rheological, thermal, mechanical, structural, and piezoelectric properties of poly(vinylidene fluoride) nanofibers fabricated using an electrospinning technique
, Article Industrial and Engineering Chemistry Research ; Volume 56, Issue 44 , 2017 , Pages 12596-12607 ; 08885885 (ISSN) ; Ahmad Ramazani, S. A ; Talebi, S ; Fattahpour, S ; Hasany, M ; Sharif University of Technology
2017
Abstract
The effects of different nano-SiO2 contents on the rheological properties of poly(vinylidene fluoride) (PVDF) solution and mechanical, thermal, structural, and piezoelectric properties of composite nanofibers were investigated. Results showed an increase in fiber diameter (∼125 to 350 nm) and ∼450% increase in tensile strength as the content of nano-SiO2 particles increased. The degree of crystallinity decreased by 19% as the nano-SiO2 content increased by 2% (w/w). Further investigation demonstrated that silica could significantly improve the piezoelectric properties of PVDF nanofibers as the output voltage showed an increase in the presence of silica attributed to change in the crystalline...
A method for real-time safe navigation in noisy environments
, Article 2013 18th International Conference on Methods and Models in Automation and Robotics, MMAR 2013, Miedzyzdroje ; 2013 , Pages 329-333 ; 9781467355063 (ISBN) ; Kamali, E ; Niknezhad, M. R ; Monfared, S. S. M. S ; Sharif University of Technology
2013
Abstract
The challenge of finding an optimized and reliable path dates back to emersion of mobile robots. Several approaches have been developed that have partially answered this need. Satisfying results in previous implementations has led to an increased utilization of sampling-based motion planning algorithms in recent years, especially in high degrees of freedom (DOF), fast evolving environments. Another advantage of these algorithms is their probabilistic completeness that guarantees delivery of a path in sufficient time, if one exists. On the other hand, sampling based motion planners leave no comment on safety of the planned path. This paper suggests biasing the Rapidly-exploring Random Trees...
A generalization of the swartz equality
, Article Glasgow Mathematical Journal ; Vol. 56, issue. 2 , May , 2014 , pp. 381-386 ; ISSN: 00170895 ; Fakhari, S. A. S ; Yassemi, S ; Sharif University of Technology
2014
Abstract
For a given (d-1)-dimensional simplicial complex Γ, we denote its h-vector by h(Γ)=(h 0(Γ),h 1(Γ),...,hd (Γ)) and set h -1(Γ)=0. The known Swartz equality implies that if Δ is a (d-1)-dimensional Buchsbaum simplicial complex over a field, then for every 0 ≤ i ≤ d, the inequality ihi (Δ)+(d-i+1)h i-1(Δ) ≥ 0 holds true. In this paper, by using these inequalities, we give a simple proof for a result of Terai (N. Terai, On h-vectors of Buchsbaum Stanley-Reisner rings, Hokkaido Math. J. 25(1) (1996), 137-148) on the h-vectors of Buchsbaum simplicial complexes. We then generalize the Swartz equality (E. Swartz, Lower bounds for h-vectors of k-CM, independence, and broken circuit complexes, SIAM J....
Hardware-in-the-loop optimization of an active vibration controller in a flexible beam structure using evolutionary algorithms
, Article Journal of Intelligent Material Systems and Structures ; Vol. 25, issue. 10 , 2014 , p. 1211-1223 ; Hosseini Kordkheili, S. A ; Afshari, S. S ; Sharif University of Technology
2014
Abstract
In this study, active vibration control of a cantilevered flexible beam structure equipped with bonded piezoelectric sensor/actuators is investigated. The linear quadratic regulator technique together with an observer is adopted to design the controller as well as to provide the full-state feedback. Two different approaches are subsequently used for simultaneously integrated optimization of the controller and observer parameters. In the first approach, a linear experimental model of the system is obtained using identification techniques, and the optimization is then performed based on a computer simulation of the system. However, in the second approach, a hardware-in-the-loop optimization...