Sharif Digital Repository

We report the nanoporous Ag2O based on the copper terephthalate metal–organic frameworks (Ag2O/MOF) photocatalyst. Ag2O/MOF nanostructure was formed via oxygen treatment of Ag/MOF nanoparticles. The resulting Ag2O/MOF photocatalysts were characterised by various techniques. Results showed that the synthesised Ag2O/MOF nanocomposite exhibited dramatic separation of photoinduced electron/hole and excellent photodegradation activity under visible light irradiation. The degradation rate of acid blue 92 using Ag2O/MOF nanocomposite is found to be higher than that using pure MOF and Ag/MOF. It was divulged that the photodegradation rate is increased by oxygen treatment of Ag in Ag/MOF structure.... 

Zeolite-based photocatalysts were prepared by the sol-gel and deposition methods. The photocatalysts were characterised by X-ray diffraction, nitrogen adsorption-desorption isotherms, FTIR spectroscopy, scanning electron microscopy and energy-dispersive X-ray spectrometry. The activity of the prepared photocatalysts was evaluated by the UV-induced degradation of acid blue 92, a textile dye in common use. The effect of various parameters, such as catalyst concentration, initial dye concentration, thiosulphate concentration and pH, on the rate and efficiency of the photocatalytic degradation of acid blue 92 was investigated. The results showed that each parameter influenced the degradation... 

By combination of 1-ethyl-3-methyl immidazolium ethyl sulfate as a typical room temperature ionic liquid (IL) and graphene oxide (GO) nanosheets, a nanocomposite was introduced for improving the direct electrochemistry and electrocatalytic activity of glucose oxidase (GOx). The enzyme on the IL-GO-modified glassy carbon electrode exhibited a quasireversible cyclic voltammogram corresponding to the flavine adenine dinucleotide/FADH2 redox prosthetic group of GOx. At the scan rate of 100 mV s-1, the enzyme showed a peak-to-peak potential separation of 82 mV and the formal potential of -463 mV (vs Ag/AgCl in 0.1 M phosphate buffer solution, pH 7.0). The kinetic parameters of the charge transfer... 

ZnO was grown on mordenite zeolite, activated carbon and alumina substrates by a liquid deposition method. The photocatalytic activity of the synthesised samples was elucidated using the photodegradation of Acid Blue 92 (AB92) dyes as a test pollutant under UV light irradiation. Supports play a key role in AB92 photodegradation and significantly improve the photocatalytic activity of ZnO. Different supports form additional transport channels and provide an effective pathway for the charge carriers. The supports effectively construct porous structures with more active sites. Hence, the higher photocatalytic activity of supported catalysts is attributed to the large surface area and charge... 

The rational design of composite catalysts is critically essential for electrochemical water splitting. Here, we report on a novel hierarchical composite that comprises NiFeSe2 nanoparticles and NiCo2O4 nanoflakes supported on nickel foam (NF) as an efficient electrocatalyst for the hydrogen evolution reaction (HER). The conjunction of the NiFeSe2 nanoparticles and NiCo2O4 nanoflakes introduces a new synergistic effect for the HER, resulting in an improved NiCo2O4 catalyst. The as-prepared NiFeSe2/NiCo2O4/NF electrode exhibited an enhanced HER activity, with a low overpotential of 83 mV at a current density of 10 mA cm−2, a low Tafel slope of 45 mV dec−1, and an excellent long-term... 

Horseradish peroxidase (HRP) was successfully immobilized on amine functionalized TiO 2-coated multiwalled carbon nanotubes (NH 2-TiO 2-CNTs) by a convenient and efficient method. Electrochemical impedance spectroscopy, cyclic voltammetry and amperometry were applied to characterize the HRP/NH 2-TiO 2-CNT nano-composite. These techniques showed that the NH 2-TiO 2-CNTs greatly enhance the electron transfer between HRP and the modified electrode. Owing to the redox reaction of the electroactive centre of HRP, the HRP/NH 2-TiO 2-CNTs modified electrode exhibited a pair of quasi-reversible peaks with a peak-to-peak separation (ΔE p) of 70.6mV and a formal potential (E 0′) of -367.65mV (versus... 

A nano-composite material consisting of amine functionalized TiO 2-coated carbon nanotubes was prepared and used for glucose oxidase (GOx) absorption. The GOx bearing nanomaterial was fixed on a glassy carbon electrode to construct a novel biosensor for glucose determination. The direct electrochemistry of immobilized GOx and its electron transfer parameters at the modified glassy carbon electrode were reported. The apparent heterogeneous electron transfer rate constant (ks) of GOx was estimated to be 3.5 s-1, which is higher than those reported previously. Amperometric detection of glucose resulted in a rapid (3 s) and stable response in the linear concentration range from 1.8 to 266 μM.... 

This study demonstrates a new kind of photocatalytic system via utilization of the superior specific properties inherent in Pickering emulsion. We designed the new photocatalytic system using a novel p–n heterojunction Ag3PO4/BiPO4 (AB) as a photocatalytic active component, multiwalled carbon nanotubes (MWCNTs) and graphene (GR) as a hydrophobic conducting nanostructure to form the stabilized Pickering emulsion. The photocatalytic activity of the as-prepared stabilized Pickering emulsion-based system (Pe-bp system) was studied by monitoring the change in Acid Blue 92 dye (AB92) concentration under both visible and UV light irradiation. The results revealed that the Pe-bp system exhibits a... 

ZnO and Mordenite zeolite (MOR) nanoparticles were prepared by precipitation process using ultrasonic irradiation and hydrothermal method, respectively. Supported ZnO catalysts were prepared and the effect of different supports on the photocatalytic activity of ZnO nanoparticles was investigated. All prepared samples were characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Fourier Transform-Infra Red Spectroscopy (FTIR), UV–vis spectroscopy (UV–vis) and BET surface area technique. The photocatalytic activity of the synthesized catalysts was elucidated using the photo-oxidation of Acid Blue 92 (AB92) as a hazardous pollutant under UV light. The effect of different... 

By combination of 1-ethyl-3-methyl immidazolium ethyl sulfate as a typical room temperature ionic liquid (IL) and graphene oxide (GO) nanosheets, a nanocomposite was introduced for improving the direct electrochemistry and electrocatalytic activity of glucose oxidase (GOx). The enzyme on the IL–GO-modified glassy carbon electrode exhibited a quasireversible cyclic voltammogram corresponding to the flavine adenine dinucleotide/FADH2 redox prosthetic group of GOx. At the scan rate of 100 mV s−1, the enzyme showed a peak-to-peak potential separation of 82 mV and the formal potential of −463 mV (vs Ag/AgCl in 0.1 M phosphate buffer solution, pH 7.0). The kinetic parameters of the charge transfer... 

Various ionic liquids (ILs) and their mixtures were coated on the Pt/Al2O3 catalyst and the resulting IL-coated catalysts were used in the synchronous hydrogenation of cyclohexene and acetone. The rate constant (k) and selectivity (S) toward CO hydrogenation were determined for several catalysts in various solvents. The solvatochromic parameters (ETN, normalized polarity parameter; π*, dipolarity-polarizability; β, hydrogen-bond acceptor basicity; α, hydrogen-bond donor acidity) were determined for the used ILs and solvents and the obtained selectivities were modeled based on the solvatochromic parameters of the IL layer and bulk solvent while using the Multiparameter Linear Regression (MLR)... 

The main aim of the present study was to enhance the degradation capacity of Acid Blue 92 (AB92) by visible-light-active Ag3PO4 nanocomposites based on g-C3N4 and Multiwalled Carbon Nanotubes (MWCNTs). The nanocomposites were fabricated through a tunable in situ deposition method. The properties of the resulting samples were investigated by X-ray diffraction, scanning electron microscopy and Fourier transform infrared (FTIR) spectroscopy. The photocatalytic activity results revealed that the Ag3PO4/g-C3N4 heterojunction inorganic/organic composite exhibited an improvement in both efficiency and the rate of AB92 photodegradation in comparison with the others. The enhanced photocatalytic... 

Horseradish peroxidase (HRP) was successfully immobilized on amine functionalized TiO2-coated multiwalled carbon nanotubes (NH2 – TiO2 – CNTs) by a convenient and efficient method. Electrochemical impedance spectroscopy, cyclic voltammetry and amperometry were applied to characterize the HRP/NH2 – TiO2 – CNT nano-composite. These techniques showed that the NH2 – TiO2 – CNTs greatly enhance the electron transfer between HRP and the modified electrode. Owing to the redox reaction of the electroactive centre of HRP, the HRP = NH2 – TiO2 – CNTs modified electrode exhibited a pair of quasi-reversible peaks with a peak-to-peak separation (ΔEp) of 70.6 mV and a formal potential (E 0′) of 367.65 mV... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive...