Sharif Digital Repository

In this paper, the effect of molybdenum on the grain boundary segregation of other elements was studied in Incoloy 901 superalloy. Initially, five alloys were prepared with different percentages of Mo by using a vacuum induction furnace. Then, these alloys were remelted by Electro-slag remelting (ESR) process and after homogenizing at 1160 °C for 2. h followed by air cooling, were rolled. The effect of Mo on segregation of elements was evaluated with Scanning Electron Microscopy, Linear Analysis, and the mechanical tests. The results showed that the grain boundary segregations of elements in Incoloy 901 superalloy were decreased by increasing of molybdenum content up to 6.7% and the... 

This paper presents a mathematical programming to model a bi-criteria traveling salesman problem (TSP) with fuzzy time windows. The objective is to minimize the travel time and minimize the sum of salesman's waiting time during the service. A triangle fuzzy number is defined for the service time of each customer. The objective function is normalized in the interval between 0 and 1. To solve such a model, two heuristic methods based on genetic algorithms (GAs) and ant colony optimization (ACO) are developed. To validate and show the efficiency these methods, a number of test problems are generated at random. Finally, a comparison of the obtained results is presented  

A multi-echelon supply chain design problem concerns the structure of the network and allocation of resources of the company to meet the demand forecast. This paper tries to design a multi-echelon supply chain network with five echelons including supplier, cross-dock, plant, distribution center and representative (customer). For this purpose, a mixed-integer mathematical model is developed to investigate the location of cross-docks, distribution centers, and also allocation between each pair of parties in order to minimize total cost of location and transportation. Due to the complexity of the model, a novel genetic algorithm is developed and applied on a real-world case study of Iran Khodro... 

The nonlinear and time varying nature of electric arc furnaces (EAFs) create flicker, harmonics, and voltage/current unbalances. Nowadays to improve the performance of EAFs and the power quality problems of electrical systems around them high speed compensators like STATCOM are needed. This paper uses a time domain model for electric arc furnaces and a new model of STATCOM respectively for creating and improving mentioned power quality problems. In this paper, first we investigate and simulate electric arc furnace and STATCOM using SIMULINK/PSB. Second, we simulate a network including them completely. The proposed models take into account arcing conditions and associated effects improvement... 

There are different thermodynamic models that have been applied for modelling of asphaltene precipitation caused by various reasons, such as solvent/CO2 injection and pressure depletion. In this work, two computer codes based on two different asphaltene precipitation thermodynamic models-the first being the thermodynamic micellization model with a different characterization approach and the second being the solid model-have been developed and used for predicting asphaltene precipitation data reported in the literature as well as in the obtained data for Sarvak reservoir crude, which is one of the most potentially problematic Iranian heavy oil reserves under gas injection conditions. For the... 

Despite numerous experimental and modeling studies, the role of temperature changes on phase behavior modeling of asphaltene precipitation and, in consequence, developing of asphaltene phase envelope in heavy crudes, remains a topic of debate in the literature. In this work, a computer code based on the non-isothermal improved solid model has been developed and used for predicting asphaltene precipitation data for one of the Iranian heavy crudes at different levels of temperature and pressure. The parameters of the non-isothermal model were tuned using three onset pressures at three different temperatures, and the asphaltene phase envelope was developed. The results showed that at high... 

In this work, a thermodynamic approach is used for modeling the phase behavior of asphaltene precipitation. The precipitated asphaltene phase is represented by an improved solid model, and the oil and gas phases are modeled with an equation of state. The Peng-Robinson equation of state (PR-EOS) was used to perform flash calculations. Then, the onset point and the amount of precipitated asphaltene were predicted. A computer code based on the solid model was developed and used for predicting asphaltene precipitation data reported in the literature as well as the experimental data obtained from high-pressure, high-temperature asphaltene precipitation experiments performed on Sarvak reservoir... 

Linear silicone rubber and polyethylene alloy produced from extrusion-injecting process will be present in separate phases. While samples are mixed with 1% dicumylperoxide, DCP, and injected in extruder, an alloy is almost formed. In addition, when the samples containing silicon rubber with vinyl group are mixed with polyethylene and passed in the vicinity of electron beam, a similar reaction occurs, as confirmed from FTIR spectrum. The water contact angles for the samples has been listed in the article. Furthermore, the crystallinity of samples produced via electron beam method is more than that obtained from peroxide method. On the other hand, the tensile strengths of produced samples via... 

There are different thermodynamic models that have been applied for modelling of asphaltene precipitation caused by various reasons, such as solvent/CO2 injection and pressure depletion. In this work, two computer codes based on two different asphaltene precipitation thermodynamic models-the first being the thermodynamic micellization model with a different characterization approach and the second being the solid model-have been developed and used for predicting asphaltene precipitation data reported in the literature as well as in the obtained data for Sarvak reservoir crude, which is one of the most potentially problematic Iranian heavy oil reserves under gas injection conditions. For the... 

Thermodynamic micellization model is known as an appropriate approach for prediction of asphaltene precipitation. However, the reliability (i.e. accuracy) of this model for whole range of pressure or injected gas mole percent must be checked. In practice, the accuracy can be improved by using a suitable characterization method. In this research, a computer code for implementing the thermodynamic micellization model has been developed. Having used this program, we make the prediction of asphaltene precipitation by using data reported in the literature as well as the experimental data obtained from high pressure, high temperature asphaltene precipitation experiments under gas injection... 

In this work, a thermodynamic approach is used for modeling the phase behavior of asphaltene precipitation. The precipitated asphaltene phase is represented by an improved solid model, and the oil and gas phases are modeled with an equation of state. The Peng-Robinson equation of state (PR-EOS) was used to perform flash calculations. Then, the onset point and the amount of precipitated asphaltene were predicted. A computer code based on the solid model was developed and used for predicting asphaltene precipitation data reported in the literature as well as the experimental data obtained from high-pressure, high-temperature asphaltene precipitation experiments performed on Sarvak reservoir... 

In this study, the nonlinear partial differential equations governing two phase flow through porous media are solved using two different methods, namely, finite difference and finite element. The capillary pressure term is considered in the mathematical model. The numerical results on a 2-D test case are then compared with the experimental drainage process and water flooding performed on a glass type micromodel. Based on the obtained results, finite difference technique needs less computational time for solving governing equations of two phase flow, but findings of this method show less agreement with the experimental data. The finite element scheme was found to be more adequate and its... 

We study a classical problem in communication and wireless networks called Finding White Space Regions. In this problem, we are given a set of antennas (points) some of which are noisy (black) and the rest are working fine (white). The goal is to find a set of convex hulls with maximum total area that cover all white points and exclude all black points. In other words, these convex hulls make it safe for white antennas to communicate with each other without any interference with black antennas. We study the problem on three different settings (based on overlapping between different convex hulls) and find hardness results and good approximation algorithms  

Time, cost and quality are among the crucial aspects of each project. In recent years, the demands of project stakeholders regarding reductions in the total cost and time of a project along with achieving the acceptable quality of the project have risen significantly. This leads researchers to developing models that incorporate the quality factor to previously existing time cost trade-off models.We develop a model for discrete time-cost-quality trade-off problem. For each activity, an execution mode can be selected from a number of possible ones. The time and cost of each mode are assumed to be crisp but the quality of each mode is a linguistic variable. Therefore, in this paper, fuzzy logic... 

Parameters of the PC-SAFT Equation of State (EoS) for pure components are generally determined by matching the saturation pressure and liquid density experimental data. These experimental data are unavailable for petroleum cuts and plus fractions of the petroleum reservoir fluids. In this work, new correlations as functions of specific gravity and molecular weight were developed to estimate the PC-SAFT parameters of petroleum cuts with unknown composition. It was shown that the proposed correlations accurately estimate the PC-SAFT parameters of the pure components published in the literature. Then, the obtained correlations were used and the PVT experimental data for various real reservoir... 

This paper presents an incentive-based demand response (DR) scheme for a small residential area including several houses. It is supposed that there is an aggregator on one side and the residential consumers on the other side, which both of them want to achieve an optimal solution for themselves. For this reason, the Stackelberg game is adopted in this paper to consider the interaction between aggregator and consumers. This game would have one leader (aggregator) and N followers (consumers). Each consumer is assumed to have two kinds of load, namelycritical load, which is not intended for DR, and Heating, ventilation, and air conditioning (HVAC) system, which is considered as a potential for... 

Wind power producers have recently gained a significant penetration in the electric power network, which might cause some challenges for the system operation due to the uncertainties in the generated power. In this way, wind power owners may offer different services, such as providing reserve capacity besides their conventional role of delivering just energy. Currently, conventional generators are the main responsible for providing some reserve in case of uncertainty in renewable generation and demand changes. Therefore, this article introduces a novel approach that allows wind power producers to participate in both energy and reserve markets alongside conventional generators. A two-stage... 

Thermodynamic modeling is known as a promising tool for phase behavior modeling of asphaltene precipitation under different conditions such as pressure depletion and CO2 injection. In this work, a thermodynamic approach is used for modeling the phase behavior of asphaltene precipitation. The precipitated asphaltene phase is represented by an improved solid model, while the oil and gas phases are modeled with an equation of state. The PR-EOS was used to perform flash calculations. Then, the onset point and the amount of precipitated asphaltene were predicted. A computer code based on an improved solid model has been developed and used for predicting asphaltene precipitation data for one of... 

Thermodynamic modeling is known as a promising tool for phase behavior modeling of asphaltene precipitation under different conditions such as pressure depletion and CO2 injection. In this work, a thermodynamic approach is used for modeling the phase behavior of asphaltene precipitation. The precipitated asphaltene phase is represented by an improved solid model, while the oil and gas phases are modeled with an equation of state. The PR-EOS was used to perform flash calculations. Then, the onset point and the amount of precipitated asphaltene were predicted. A computer code based on an improved solid model has been developed and used for predicting asphaltene precipitation data for one of...