Loading...
Search for: tavakoli--maryam
0.131 seconds

    3d Design of a Microfluidic Chip for Anticancer Drugs Screening

    , M.Sc. Thesis Sharif University of Technology Hashemi, Maryam Sadat (Author) ; Mashayekhan, Shohreh (Supervisor) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Nowadays, advanced and inexpensive pre-clinical methods for investigating the effects of anti-cancer drugs are expanding. One of the latest three-dimensional laboratory modeling for evaluating the effects of drugs is the use of tumor-on-chip technology, which actually models the physiological system of the body through three-dimensional scaffolds, multicellular cultures, and shaped vascular systems. In this study, three-dimensional culture of cancer cells was performed in the form of spheroids. A chip of U-shaped microstructures with and without gaps was used to trap cells and form cancer spheroids. We simulated the simultaneous effect of drug and oxygen concentration distribution inside the... 

    Organic halides and nanocone plastic structures enhance the energy conversion efficiency and self-cleaning ability of colloidal quantum dot photovoltaic devices

    , Article Journal of Physical Chemistry C ; Volume 121, Issue 18 , 2017 , Pages 9757-9765 ; 19327447 (ISSN) Tavakoli, M. M ; Simchi, A ; Tavakoli, R ; Fan, Z ; Sharif University of Technology
    American Chemical Society  2017
    Abstract
    This paper presents solid-state ligand exchange of spin-coated colloidal lead sulfide quantum dot (PbS QD) films by methylammonium iodide (MAI) and integration of them in depleted heterojunction solar (DHS) devices having an antireflecting (AR) nanocone plastic structure. Time-resolved photoluminescence measurements determine a shorter lifetime of the charge carries on a semiconductor (TiO2) electron transfer layer for the MAI-passivated QD films as compared with those with long-chain aliphatic or short thiol ligands. Consequently, the DHS device yields improved power conversion efficiency (>125%) relative to oleic-acid-passivated PbS QD films. Using anodized aluminum oxide templates, an... 

    Surface engineering of TiO2 ETL for highly efficient and hysteresis-less planar perovskite solar cell (21.4%) with enhanced open-circuit voltage and stability

    , Article Advanced Energy Materials ; Volume 8, Issue 23 , 2018 ; 16146832 (ISSN) Tavakoli, M. M ; Yadav, P ; Tavakoli, R ; Kong, J ; Sharif University of Technology
    Wiley-VCH Verlag  2018
    Abstract
    Interfacial studies and band alignment engineering on the electron transport layer (ETL) play a key role for fabrication of high-performance perovskite solar cells (PSCs). Here, an amorphous layer of SnO2 (a-SnO2) between the TiO2 ETL and the perovskite absorber is inserted and the charge transport properties of the device are studied. The double-layer structure of TiO2 compact layer (c-TiO2) and a-SnO2 ETL leads to modification of interface energetics, resulting in improved charge collection and decreased carrier recombination in PSCs. The optimized device based on a-SnO2/c-TiO2 ETL shows a maximum power conversion efficiency (PCE) of 21.4% as compared to 19.33% for c-TiO2 based device.... 

    Efficient, hysteresis-free, and flexible inverted perovskite solar cells using all-vacuum processing.Efficient, hysteresis-free, and flexible inverted perovskite solar cells using all-vacuum processing

    , Article Solar RRL ; 2020 Tavakoli, M. M ; Yadav, P ; Prochowicz, D ; Tavakoli, R ; Sharif University of Technology
    Wiley-VCH Verlag  2020
    Abstract
    The fabrication of efficient perovskite solar cells (PSCs) using all-vacuum processing is still challenging due to the limitations in the vacuum deposition of the hole transporting layer (HTL). Herein, inverted PSCs using copper (II) phthalocyanine (CuPC) as an ideal alternative HTL for vacuum processing are fabricated. After proper optimization, a PSC with a power conversion efficiency (PCE) of 20.3% is achieved, which is much better than the PCEs (16.8%) of devices with solution-based CuPC. As it takes a long time to dissolve CuPC in the solution-based device, the evaporation approach has better advantage in terms of fast processing. In addition, the device with the evaporated CuPC HTL... 

    Efficient perovskite solar cells based on Cdse/Zns quantum dots electron transporting layer with superior UV stability

    , Article Physica Status Solidi - Rapid Research Letters ; Volume 14, Issue 6 , 2020 Tavakoli, M. M ; Prochowicz, D ; Yadav, P ; Tavakoli, R ; Sharif University of Technology
    Wiley-VCH Verlag  2020
    Abstract
    Stability is the main challenge in the field of perovskite solar cells (PSCs). Finding new strategies is required to protect the PSCs from deteriorating agents such as humidity, heating, and illumination. Herein, a new electron transporting layer (ETL), i.e., CdSe/ZnS quantum dots (QDs), is proposed for the fabrication of efficient and stable PSCs. CdSe/ZnS QDs layer not only works as an ETL but also has downshifting property, which can improve both efficiency and stability of the PSCs. Using CdSe/ZnS QDs ETL with green emission, a PSC with maximum power conversion efficiency (PCE) of 18% is achieved. More importantly, the device shows great UV stability, much better than the device with... 

    Model Checking of Stochastic Activity Networks

    , M.Sc. Thesis Sharif University of Technology Maryam Bagheri (Author) ; Movaghar, Ali (Supervisor)
    Abstract
    Modeling and performance evaluation of the real time distributed systems is a significant problem. Stochastic activity network is one of the high level models used for this purpose. This network is an extension of generalized stochastic Petri net which is more powerful and flexible than other Petri net extensions. Checking the satisfiability of properties such as performance, dependability and user's expected properties is considerable in these models. Thus, using the approaches and generating modeling and model checking tools with the mentioned purpose is attractive. A model checker automatically checks the correctness of the system behaviors as properties against the model by getting the... 

    Robust Estimation and Control of a Planet Lander

    , M.Sc. Thesis Sharif University of Technology Ahmadvand, Reza (Author) ; Kiani, Maryam (Supervisor)
    Abstract
    This study has focused on the important problem of landing on a planet as an important current and future space mission. In this regard, dynamics modeling and integrated state estimation and control problems have been investigated in different views. To this aim, first a novel concurrent representation for translational and rotational kinematics has been developed based on the extension of modified Rodrigues parameters to dual space. This parameter set, called dual modified Rodrigues parameters (DMRP), is then utilized to establish an integrated roto-translational dynamic. The proposed DMRP-based kinematics and dynamics have been verified via comparison to traditional methods of... 

    Optimal Energy Trading in a Smart Grid Based on Extremum-seeking Algorithm

    , M.Sc. Thesis Sharif University of Technology Asgari, Houman (Author) ; Babazadeh, Maryam (Supervisor)
    Abstract
    Prevalent deployment of Distributed Energy Resources(DERs) in the demand side of electrical energy grids has several advantages such as greenhouse gases emission reduction, mitigation of power losses in the distribution grids and abatement of the dependency on the wholesale generation companies. At the same time, it paves the way for the advent of local interactive energy trading frameworks. In the following thesis, a distributed data-driven algorithm is developed for market-clearing in a community-based local energy market. The social welfare maximization is considered as the objective of the energy trading. The production and demand of electricity are the decision variables of sellers and... 

    Design of Microfluidic Chip for 3D Cell Culture

    , M.Sc. Thesis Sharif University of Technology Ghobadi, Faezeh (Author) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Understanding biological systems requires extensive knowledge of individual parameters, and to study the processes of cell differentiation and cell behavior, a suitable environment must be created with the physiological conditions of the human body. For this purpose, with the knowledge of microfluidics, a microenvironment can be provided to study the behavior of cells on a small scale. The use of bone tissue model microfluidic chips is an alternative and new method in which it is possible to study the behavior of cells to differentiate into bone and to examine the toxicity of drugs, which in itself can help in the effective and successful treatment of these cases show. Therefore, in this... 

    Navigation and Control of a Free-Flying Satellite for Cargo Transportation and Placement in Intra-Vehicular Environment

    , M.Sc. Thesis Sharif University of Technology Moosavi, Farzan (Author) ; Kiani, Maryam (Supervisor)
    Abstract
    The main topic of this research is the navigation and control of a free-flying satellite with a robot manipulator while transferring and placing cargo on a space station. After connecting the cargo module, astronauts and robots need to deliver the available loads to the desired modules in a space station. Capturing an object or cargo is a critical issue studied extensively so far. However, delivery and placing of the cargo at the target point have not been investigated yet, to the best of the author’s knowledge; hence, this is a primary motivation for conducting the proposed research. After capturing the payload, the position and attitude of the manipulator with respect to the station’s... 

    Fabrication the Hydrogel Microfibers Using Bioprinter with Application in Cardiovascular Model

    , M.Sc. Thesis Sharif University of Technology Heidari, Faranak (Author) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Cardiovascular disease (CVD) currently remains a considerable challenge for clinical treatments. CVDs account for N17.5 million deaths per year and will predictably increase to 23.6 million by 2030. The main purpose is to create human model systems to study the effect of disease mutations or drug treatment on the heart. In addition, engineered cardiac tissues are considered promising candidates to be transplanted to improve the function of diseased hearts. For engineered active tissues/organs, 3D bioprinting can fabricate complex tissue architecture with a spatiotemporal distribution of bioactive substances (cells, growth factors, and others) to better guide tissue regeneration. However,... 

    Utilizing Gaussian Processes to Learn Dynamics of Unknown Torques Acting on a Spacecraft

    , M.Sc. Thesis Sharif University of Technology Baradaran, Behdad (Author) ; Kiani, Maryam (Supervisor)
    Abstract
    Accurate and fast attitude estimation of a rigid body plays an essential role in the performance of a vehicle’s control system, especially aerospace vehicles. Ample works have been done to increase the accuracy and speed of the attitude estimation process, but all have been developed according to a model-based approach. This approach assumes that the torques acting on the body have a known dynamical model that is used for the attitude estimation. The purpose of the present research is to estimate the attitude via a model-free approach, i. e. dynamics of the torques acting on the body are no longer assumed to be known, and its learning is the next step. Thus, the problem formulation of this... 

    Stabilization and Pole-Placement by Structurally-Constrained Controllers: A Graph-Theoretic Approach

    , M.Sc. Thesis Sharif University of Technology Moushaee, Pegah (Author) ; Babazadeh, Maryam (Supervisor)
    Abstract
    This thesis presents a new approach to design structural output feedback controllers with stabilization and pole-placement at desired points on the S plane. It is assumed that the linear time-invariant system has no fixed mode corresponding to the specified control structure, outside the desired region of the closed-loop poles, such that the structural controller design problem is theoretically feasible. To this end, the structural output controller design problem is first transformed into a structurally equivalent problem based on the solution of a set of discrete linear programs. Then, by using the resultant structure, a new method is proposed for designing static and dynamic control loops... 

    Fabrication of Thick Scaffold with Microfluidic Channels by Bioprinter

    , M.Sc. Thesis Sharif University of Technology Khalighi, Sadaf (Author) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Cardiovascular diseases are among the leading causes of death worldwide. For instance, in 2015, almost 31% of the world’s mortality rate was due to these causes. One of these diseases is cardiac coronary vessels’ occlusion which leads to the insufficient blood supply to the heart tissue and cardiomyocytes death after Myocardial Infarction (MI). After MI, a hierarchy of events in the heart tissue changes heart muscle and forms cardiac fibrosis. This fibrotic tissue does not have the native one’s properties and function, so it will cause cardiac arrest and patient death. Therefore, it is obvious that vascular network plays a crucial role in the heart function. The importance of cardiac... 

    Optimal Control of Unknown Interconnected Systems via Distributed Learning

    , M.Sc. Thesis Sharif University of Technology Farjadnasab, Milad (Author) ; Babazadeh, Maryam (Supervisor)
    Abstract
    This thesis addresses the problem of optimal distributed control of unknown interconnected systems. In order to deal with this problem, a data-driven learning framework for finding the optimal centralized and the suboptimal distributed controllers has been developed via convex optimization.First of all, the linear quadratic regulation (LQR) problem is formulated into a nonconvex optimization problem. Using Lagrangian duality theories, a semidefinite program is then developed that requires information about the system dynamics. It is shown that the optimal solution to this problem is independent of the initial conditions and represents the Q-function, an important concept in reinforcement... 

    Fixed-Time Consensus Control of Unknown Multi-Agent Systems Based on Distributed Reinforcement Learning

    , M.Sc. Thesis Sharif University of Technology Delshad, Aria (Author) ; Babazadeh, Maryam (Supervisor)
    Abstract
    This thesis introduces a distributed backstepping control strategy based on reinforcement learning to achieve fixed-time consensus in high-order nonlinear multi-agent systems. Each agent, whether a leader or a follower, is modeled using a strict feedback approach, incorporating uncertainties as unknown nonlinear functions and disturbance signals across all state variables. The communication network among agents can be either directed or undirected, with a fixed topology. Each follower employs a control law derived from actor-critic networks, utilizing only the outputs from neighboring agents. The proposed method combines virtual and actual backstepping control laws, formulated from two key... 

    Application of Machine Learning Algorithms in Analysis and Prediction of Football Goalkeepers Performance and their Valuation in the Transfer Market

    , M.Sc. Thesis Sharif University of Technology Zabihi, Matin (Author) ; Radman, Maryam (Supervisor)
    Abstract
    Football transformation into an industry with extraordinary financial flow has made this popular sport an attractive field for sports analysts. The development of the computer science and data science has led to the emergence of a concept called football match analysis. The goalkeepers, as a unique member of football teams and regrading their unique features and characteristics, play a crucial role in the outcome of competitions and the success of the teams. Therefore, analysis of various aspects of their performance is one of the essential issues in the application of data science in football. In this research, three separate parts have been studied. In the first part, by using pre-match... 

    Employing humanoid robots for teaching english language in Iranian junior high-schools [electronic resource]

    , Article International Journal of Humanoid Robotics ; Vol. 11, No. 3 (2014) 1450022 Alemi, M. (Minoo) ; Meghdari, Ali ; Ghazisaedy, Maryam ; Sharif University of Technology
    Abstract
    This paper presents the effect of robotics assisted language learning (RALL) on the vocabulary learning and retention of Iranian English as foreign language (EFL) junior high school students in Tehran, Iran. After taking a vocabulary pre-test, 46 beginner level female students at the age of 12, studying in their first year of junior-high participated in two groups of RALL (30 students) and non-RALL (16 students) in this study. The textbook used was the English book (Prospect-1) devised by the Iranian Ministry of Education for 7th graders, and the vocabulary taught and tested (pre-test and post-test) were taken from this book. Moreover, the treatment given by a teacher accompanied by a... 

    Multimaterial topology optimization by volume constrained Allen-Cahn system and regularized projected steepest descent method

    , Article Computer Methods in Applied Mechanics and Engineering ; Vol. 276 , 2014 , pp. 534-565 ; ISSN: 00457825 Tavakoli, R ; Sharif University of Technology
    2014
    Abstract
    A new computational algorithm is introduced in the present study to solve multimaterial topology optimization problems. It is based on the penalization of the objective functional by the multiphase volume constrained Ginzburg-Landau energy functional. The update procedure is based on the gradient flow of the objective functional by a fractional step projected steepest descent method. In the first step, the new design is found based on the projected steepest descent method to ensure the reduction in the objective functional, simultaneously satisfying the control constraints. In the second step, regularization step, an H1 regularity of the solution is ensured while keeping the feasibility of... 

    On the prediction of shrinkage defects by thermal criterion functions

    , Article International Journal of Advanced Manufacturing Technology ; Vol. 74, issue. 1-4 , Jun , 2014 , p. 569-579 Tavakoli, R ; Sharif University of Technology
    2014
    Abstract
    The goal of the present study is to predict the formation of solidification induced defects in castings by thermal criteria functions. In a criterion function method, the heat transfer equation is firstly solved, and then the susceptibility of defect formation at every point in the casting is predicted by computing a local function, criterion function, using results of the thermal analysis. In the first part of the paper, some famous criteria functions, in particular, the Pellini and Niyama criteria, are analyzed and their shortcomings are discussed in details. Then, a new criterion function is suggested to decrease the shape-dependency issue of the former criteria. The feasibility of the...