Sharif Digital Repository

In the present study, design and manufacturing of a connected pipe liquid fuel ramjet test platform is implemented for performance investigation of a research liquid fuel ramjet burner in the thermodynamic flight conditions. Design and manufacturing of platform systems include: the hot air supply system, the liquid fuel system and the square cross-sectional combustion chamber with the v-gutter shape flame holder. In order to determine the performance range of subsystems, calibration process has been carried out. Calibration process of the hot air supply system includes: determining of the burner inlet velocity and temperature. Also, calibration of the liquid fuel system includes: determining... 

The main purpose of this research is to evaluate the probabilistic benefit of the implementation of second isolation layer in isolated structures to both the structure and the constructor. The innovation of this research is in the utilization of a seemingly useless part of the structure, which is the ridge, for mitigating the structure’s displacement. For this purpose, a five-story residential structure and its ridge have been isolated and modeled as an MDOF system with two degree of freedom in MATLAB software and the benefits due to the reduction in displacement and acceleration has been calculated. The results indicate 40 percent reduction in the main structure’s displacement and a benefit... 

Recently, the advent of online platforms as an intermediary tool has provided an opportunity for service providers and manufacturers to offer their services/products to consumers. Ride-hailing platforms are an example of these businesses where independent drivers and passengers are matched via an online platform. One of the most significant challenges faced by these companies is the emergence of strategic behaviors on both the demand and the supply side, which might affect the performance and profitability of the platform.In this thesis, we study the strategic behavior of drivers and its impact on their performance, using the data of one of the largest ride-hailing companies in Iran. We use... 

Chattering in cutting process is one of the destructive phenomena in machining, which results in ripple of workpiece surfaces. In this phenomenon, the displacement of the tool tip moves towards instability and the tool vibration continues. Eventually, the tool jumps or breaks out with relatively large shear forces, which leads to a reduction in the rate of production and machining. Since machining processes are very widespread, phenomenological studies of chatter have progressed in the field of modeling and empirical experiments. Research in the field of modeling is mainly intended to examine the dynamics of the tool in two ways: analytic and finite element. In these methods, there are... 

Cerebral palsy (CP) is one the most prevalent neuromusculoskeletal disease amongst children. Damage in the central nervous system (CNS) causes defective growth of the musculoskeletal system during infancy to maturity, then leading to impairment of selective motor control (SMC), spasticity and sometimes contracture of musculotendinous junction. Treatment of Cerebral Palsy is limited to reduce complications. Medical procedures such as neurosurgery and orthopaedic surgeries or rehabilitation used as a common operation. Recently studies in the field of synergy directed a new path to understanding of human motor control complexity besides identification of functionality of musculoskeletal... 

In this research, we studied the effect of compatibilizer and short glass fiber on microstructure and mechanical properties of PBT/PC blends. Fisrt, Antioxidants and sodium pyrophosphate dibasic were used to suppress transesterification in PBT/PC Blend. The results showed that best composition occur when both of them are used. In the next step, we used 3%wt MBS (methyl methacrylate-butadiene-styrene) and saw that this weight percent of this compatibilizer doesn’t useful. Moreover addition of short glass fiber to PBT/PC was examined and the results showed that mechanical properties of composite are extensively increased. Also in this step, we proved this idea that we can replace some of PBT... 

As the traditional MOSFET is reaching to its scaling limit, it is crucial to find an alternative. Single Electron Devices have shown promising features, such as nano-scale dimensions and extremely low power consumption that can lead to new generation of integrated circuits. In this thesis we have presented an analytical study of metallic single electron devices, particularly single electron transistors (SET). We have illustrated our study with some major logic applications of SET. The main goal of this thesis is to develop simulation software for single electron circuits, comparable with the well-known commercial software “SIMON”, which can provide steady-state and transient analysis of the... 

The economic framework of the petroleum sector exhibits significant divergence from other businesses owing to the substantial risks and uncertainties inherent in oil and gas ventures, compounded by highly unpredictable price fluctuations. Moreover, the abundance of uncertainties in the data employed for investment decisions in petroleum projects is very large, thus exerting a significant impact on the decision-making processes. This research delves into the impact of diverse risk factors on oil contracts and scrutinizes their influence on contractual dynamics. The study unfolds in three segments, encompassing an examination of economic factors shaping oil contracts, model design, and the... 

Part 1: Techniques of production data analysis for single-phase oil and gas reservoirs have advanced significantly over the past few years. These techniques range from traditional (Arps and Fetkovich) to modern (they account for the variation of operating conditions at the wellbore). Although the production data analysis methods are used generally for single phase reservoirs, the application of these techniques for analysis of production data of a gas condensate reservoir may not yield the reliable answer due to the fact that the flow of fluid in gas condensate reservoirs is not single-phase. This study presents the treatment of the modern methods of production data analysis (single phase... 

Hydrocarbon reservoirs may be classified on the basis of their drive mechanisms. In the reservoirs adjoined by water aquifers, waterdrive may be the primary production mechanism. The invasion of reservoir rock by aquifer water may have a significant impact on reservoir performance. Therefore, water influx into hydrocarbon reservoirs must be predicted accurately as a function of time, pressure history at the reservoir/aquifer interface, reservoir/aquifer size ratio, and aquifer characteristics.To forecast the performance in a waterdrive reservoir, an aquifer model simulating the fluid flow in the aquifer and flow from the aquifer into the reservoir is needed. Robust techniques for analysis of... 

As the published statistics of prestigious international institutes show, the share of natural gas from the energy basket of the world is rising. This increase is due to some reasons such as decrease in oil reserves, discovery of new gas fields, lower environmental problems, etc. The Islamic Republic of Iran is not an exception of this rule; but also because of huge gas reservoirs that Iran has, it becomes very important for the Iranian government. Hence, research for predicting the behavior of such reservoirs is a necessary need of oil and gas industry.Both thermodynamic and flow behavior of gas condensate fluids are more complicated than other reservoir fluids. Its complex thermodynamic... 

The success of matrix acid production operations and its proper efficiency is one of the main challenges for oil and gas companies. The heterogeneity of the reservoir formation (especially the permeability difference) in the area around the well due to the presence of different reservoir layers results in the non-uniform distribution of acid among them and adds acidizing challenges. In order to improve production conditions, stimulation fluid transfer to the low permeability layer, which is the main target of acidizing. In this study, a new generation of chemical diverter, called Viscoelastic Surfactant, has been used. These materials have two components of elastic and viscous behavior, and... 

Due to the decrease in oil reserves in the world, increasing population and the growing demands for oil consumption in the world, increasing the oil recovery from oil reservoirs has become more important. Increasing the amount of oil production efficiency by using low salinity water/modified salinity water has been highly appreciated during the last two decades. Low-salt water is a new method, due to its advantages such as low cost, simplicity of operation and low environmental hazards. It is believed that low salinity water can alter the rock wettability from a more oil-wetting state to a more water-wetting state. In order to be able to predict the performance of low salinity water... 

In this thesis non-ideal behavior of fluids and its effects on hydrodynamic and mass transfer in multiphase flow is studied. A numerical framework has been proposed to model the interacting effects of mixture non-ideality and mass transfer on hydrodynamics of a multiphase system using CFD methods. Using the numerical framework mass and momentum transfer in a system was simulated. The system consists of a cylindrical vessel filled with vapor and liquid hydrocarbons which selected as the benchmark. The liquid hydrocarbon is chosen to be pure Octane and the hydrocarbon in the gas phase is assumed to be Propane. Due to operating condition (T=323 K, P =445 kpa) the behavior of fluid is non-ideal... 

Asphaltine particle precipitation may lead to serious problems in petroleum industry; including wellbore transmissibility reduction. One of the proposed remedial methods is to make a use of the microorganisms which are able to consume the heavy hydrocarbon chains.
Hydrophobicity of a cell surface is one of the parameters which greatly affect the microorganism adhesion to water insoluble hydrocarbons, in which results a higher hydrocarbon biodegradation. Consequently as the hydrophobicity of a cell surface increases; the microorganism tendency to bond with the hydrocarbon molecule enhances. The presence of a surface active agent, as an instance a chemical surfactant, will affect the... 

Fracture reservoirs are highly heterogeneous. This heterogeneity makes the process of adjusting model parameters to match both the static geological and dynamic production data challenging. For this reason, the characterization of the fracture network of these reservoirs, which is achieved by finding the appropriate probability distributions of the fracture properties in the discrete fracture network model, requires the use of an integrated workflow for the process of history-matching.This thesis, presents an integrated workflow for the process of history-matching of naturally fractured reservoirs with field-scale performance capability. In this methodology, first, multiple discrete fracture...