Loading...
Search for:
tayyebi--a
0.127 seconds
Total 13835 records
Modification of square root formula for approximate estimation of diffusion coefficient of particulate adsorbents
, Article ICCCE 2010 - 2010 International Conference on Chemistry and Chemical Engineering, Proceedings, 1 August 2010 through 3 August 2010, Kyoto ; 2010 , Pages 110-113 ; 9781424477647 (ISBN) ; Grayeli, F ; Tayyebi, A ; Khanchi, A ; Sharif University of Technology
2010
Abstract
The well known square root formula for the kinetics of adsorption by spherical particle U(t)=6/r0(Dt/π)1/2 is only valid in the early stage of adsorption (U(t) ≤ 0.3), where U(t) shows fractional attainment to the equilibrium. Present study shows that with a little manipulation of this formula, its application range can be extended to U (t) ≤ 0.95. The suggested formula U(t)=6/r0(Dt/π)1/2 -3Dt/r0 2 in addition of simplicity, has higher accuracy than both square root and Vermeulen's formulas
Synthesis of “L-cysteine–graphene oxide” hybrid by new methods and elucidation of its uptake properties for Hg(II) ion
, Article Separation Science and Technology (Philadelphia) ; Volume 53, Issue 6 , 2018 , Pages 843-855 ; 01496395 (ISSN) ; Outokesh, M ; Akbari, A ; Kosari, M ; Tayyebi, A ; Sharif University of Technology
Taylor and Francis Inc
2018
Abstract
This study introduces two new, simple, and scalable methods for synthesis of “cysteine–graphene oxide” hybrid, namely nucleophilic and covalent methods. Produced adsorbents could uptake 500 and 600 mg Hg2+/g, respectively, which are larger than capacities of most of the commercial adsorbents. By means of different instrumental techniques, chemical structures of the obtained graphene products were disclosed, and two pertinent mechanisms for their formations were suggested. Time for attaining uptake equilibrium for nucleophilic/covalent samples was 30 min/150 min, and kinetics was controlled by liquid film resistance/chemical reaction mechanisms, respectively. High selectivity and good...
Synthesis and characterization of ultrasound assisted "graphene oxide-magnetite" hybrid, and investigation of its adsorption properties for Sr(II) and Co(II) ions
, Article Applied Surface Science ; Volume 353 , 2015 , Pages 350-362 ; 01694332 (ISSN) ; Outokesh, M ; Moradi, S ; Doram, A ; Sharif University of Technology
Elsevier
2015
Abstract
Magnetite nanoparticles with a size distribution of 15-21 nm were synthesized and decorated onto surface of graphene oxide by ultrasound assisted precipitation. Size and size distribution of the obtained M-GO hybrid were appreciably finer than the hybrids prepared by stirring method. M-GO is a superparamagnetic material with saturation magnetization of 31 emu g-1. The Langevin equation was successfully applied for estimation of size of Fe3 O4 nanoparticles in M-GO hybrid, with maximum error of 17.5%. The study put forward a formation mechanism for M-GO, based on instrumental analyses. Adsorption isotherms of Sr2+ and Co2+ ions, which were fitted by Langmuir monolayer...
Synthesis and characterization of a bentonite-alginate microspherical adsorbent for removal of uranyl ions from aqueous Solutions
, Article Separation Science and Technology ; Volume 45, Issue 2 , 2010 , Pages 288-298 ; 01496395 (ISSN) ; Khanchi, A ; Ghofrani, M.B ; Outokesh, M ; Sharif University of Technogy
2010
Abstract
A novel microspherical adsorbent for the removal of uranium from aqueous solutions was developed by immobilizing of natural bentonite in the polymeric matrix of calcium alginate. Different uptake properties of the prepared microspheres were examined using batch, stirred and column methods. The adsorbent showed high affinity toward uranium ions, especially at pHs above 3. Major uptake mechanisms included ion exchange, chelating of the (UO2)2+ ions to the -OH groups of alginate, and surface complexation with bentonite. Surprisingly, the capacity of microspheres was higher than both its constituents, revealing that a synergetic effect occurs. Adsorption kinetics was controlled by slow chemical...
Artificial intelligence techniques for modeling and optimization of the HDS process over a new graphene based catalyst
, Article Phosphorus, Sulfur and Silicon and the Related Elements ; Volume 191, Issue 9 , 2016 , Pages 1256-1261 ; 10426507 (ISSN) ; Kazemeini, M ; Rashidi, A ; Tayyebi, S ; Sharif University of Technology
Taylor and Francis Ltd
2016
Abstract
A Co-Mo/graphene oxide (GO) catalyst has been synthesized for the first time for application in a defined hydrodesulfurization (HDS) process to produce sulfur free naphtha. An intelligent model based upon the neural network technique has then been developed to estimate the total sulfur output of this process. Process operating variables include temperature, pressure, LHSV and H2/feed volume ratio. The three-layer, feed-forward neural network developed consists of five neurons in a hidden layer, trained with Levenberg–Marquardt, back-propagation gradient algorithm. The predicted amount of residual total sulfur is in very good agreement with the corresponding experimental values revealing a...
Synthesis, characterization and biological evaluation of a well dispersed suspension of gallium-68-labeled magnetic nanosheets of graphene oxide for in vivo coincidence imaging
, Article Radiochimica Acta ; Volume 105, Issue 1 , 2017 , Pages 65-73 ; 00338230 (ISSN) ; Rahighi, R ; Tayyebi, A ; Feizi, S ; Sharif University of Technology
Walter de Gruyter GmbH
2017
Abstract
Graphene oxide (GO) nanosheets were hybridized with Fe3O4 nanoparticles (NPs) to form magnetic GO (MGO) and were further labeled by [68Ga]GaCl3 as a potential drug delivery system. Paper chromatography, Fourier transform infra red (FTIR) spectroscopy, low-angle X-ray diffraction (XRD), CHN and atomic force microscopy (AFM) were utilized to characterize the trinary composite ([68Ga]@MGO). Biological evaluations of the prepared nanocomposite were performed in normal Sprague Dawley rats and it was found to be a possible host for theranostic radiopharmaceuticals. The results showed that the grafting of Fe3O4 NPs on nanocomposite reduced the unwanted liver and spleen uptakes and increased the...
Comments on the "Recovery of palladium from chloride and chloride-nitrate solutions using ion-exchange resins with S-donor atoms"
, Article Desalination ; Volume 311 , 2013 , Pages 241-242 ; 00119164 (ISSN) ; Outokesh, M ; Khanchi, A. R ; Eskandari, N ; Tayyebi, A ; Sharif University of Technology
2013
LDPE/EVA/graphene nanocomposites with enhanced mechanical and gas permeability properties
, Article Polymers for Advanced Technologies ; Volume 26, Issue 9 , 2015 , Pages 1083-1090 ; 10427147 (ISSN) ; Ramazani S. A ; Hamed Mosavian, M. T ; Tayyebi, A ; Sharif University of Technology
John Wiley and Sons Ltd
2015
Abstract
In the present work, graphene oxide (GO) and reduced graphene oxide (RGO) were incorporated at low-density polyethylene (LDPE)/ethylene vinyl acetate (EVA) copolymer blend using solution casting method. Monolayer GO with 1-nm thickness and good transparency was synthesized using the well-known Hummers's method. Fourier transform infrared and X-ray photoelectron spectroscopy data exhibited efficient reduction of GO with almost high C/O ratio of RGO. Scanning electron microscopy showed the well distribution of GO and RGO within LDPE/EVA polymer matrix. The integrating effects of GO and RGO on mechanical and gas permeability of prepared films were examined. Young's modulus of nanocomposites are...
Supercritical synthesis and characterization of graphene-pbs quantum dots composite with enhanced photovoltaic properties
, Article Industrial and Engineering Chemistry Research ; Volume 54, Issue 30 , 2015 , Pages 7382-7392 ; 08885885 (ISSN) ; Tavakoli, M. M ; Outokesh, M ; Shafiekhani, A ; Simchi, A ; Sharif University of Technology
American Chemical Society
2015
Abstract
Lead sulfide quantum dots (PbS QDs) were decorated onto a graphene surface in a semi-core-shell structure using supercritical ethanol. The temperature of ethanol played significant role in controlling size and agglomeration of QDs as well as the extent of reduction of graphene. Average size of the QDs was estimated by transmission electron microscopy to be around 3.96 nm and by quantum models to be about 4.34 nm. PbS QDs prepared at 330 °C were of high purity, and the yield was 99%. Instrumental and chemical analyses demonstrated formation of a strong bond between PbS QDs and graphene, through a Pb-O-C bridge. UV and photoluminescence measurements along with theoretical considerations...
Evaluation of dosimetric characteristics of graphene oxide/PVC nanocomposite for gamma radiation applications
, Article Radiochimica Acta ; Volume 105, Issue 2 , 2017 , Pages 161-170 ; 00338230 (ISSN) ; Malekie, S ; Rahighi, R ; Tayyebi, A ; Ziaie, F ; Sharif University of Technology
Walter de Gruyter GmbH
2017
Abstract
Graphene oxide-polyvinyl chloride composite was prepared using tetrahydrofuran solvent-assisted dispersion of characterized nano flakes of graphene oxide in polymer matrix. Electrical percolation threshold of GO/PVC nanocomposite was determined via a finite element simulation method with a 2D model and compared with experimental results. A conductive cell with two silver coated walls was designed and fabricated for exploring dosimetric properties of the composite. Some characteristics of the new nanocomposite such as linearity of dose response, repeatability, sensitivity and angular dependence are investigated. According to 2D proposed method, obtained data associated to electrical...
Synthesis and Characterization of Graphene-based Material and Investigation of its Adsorption Properties for Radioactive Waste
, Ph.D. Dissertation Sharif University of Technology ; Outokesh, Mohammad (Supervisor)
Abstract
Nuclear power is a prominent alternative of fossil fuels that can effectively solve global warming, acid rains and other consequences of air pollutions, caused by combustion. Despite such obvious advantage, this highly compact form of energy suffers from a big problem corresponding to its nuclear waste. Graphene oxide (GO), a lamellar material with wide range of surface functional groups such as epoxy (C-O-C), hydroxyl, and carboxyl offers large surface area as well as high sorption capacity for the metallic cations. This thesis study presents a supercritical, and co-precipitation synthesis of magnetite- graphene oxide (M-GO) in which Fe3O4 nanoparticles are simultaneously formed, surface...
Supercritical synthesis of a magnetite-reduced graphene oxide hybrid with enhanced adsorption properties toward cobalt & strontium ions
, Article RSC Advances ; Volume 6, Issue 17 , 2016 , Pages 13898-13913 ; 20462069 (ISSN) ; Outokesh, M ; Sharif University of Technology
Royal Society of Chemistry
2016
Abstract
The current study presents a supercritical synthesis of magnetite-reduced graphene oxide (M-RGO) in methanol media, in which Fe3O4 nanoparticles are simultaneously formed, surface modified and decorated on the surface of the reduced graphene oxide. Simulations using density functional theory, which were performed using the M06-2x/cc-pVDZ level of theory, indicate that upon adsorption of a Fe3O4 cluster on the graphene, the overall charge on the graphene surface becomes about -0.0236e, indicating charge transfer from the Fe3O4 cluster to the graphene surface. Instrumental and chemical analyses exhibited the formation of strong bonds between Fe3O4 and graphene, through C-O-Fe and C-Fe bridges....
ZnO quantum dots-graphene composites: Formation mechanism and enhanced photocatalytic activity for degradation of methyl orange dye
, Article Journal of Alloys and Compounds ; Volume 663 , 2016 , Pages 738-749 ; 09258388 (ISSN) ; Outokesh, M ; Tayebi, M ; Shafikhani, A ; Şengör, S. S ; Sharif University of Technology
Elsevier Ltd
2016
Abstract
The current study demonstrates homogenous decorating of zinc oxide quantum dots (QDs) onto graphene oxide (GO) surface via simple chemical method. The AFM image exhibited that the prepared graphene was 0.8 nm thick and hence practically monolayer. Average size of the ZnO QDs was estimated by transmission electron microscopy around 3 nm. Instrumental and chemical analyses demonstrated formation of a strong bond between ZnO QDs and GO, through C-O-Zn and C-Zn bridges. The UV-visible spectra displayed that the introduction of graphene sheets to ZnO QDs resulted in higher absorption intensity of UV as well as widening of adsorption window toward visible light for ZnO-Graphene due to chemical...
Numerical Analysis of a Supersonic Jet into a Subsonic Compressible Crossflow and the Effects on a Downstream Fin
, M.Sc. Thesis Sharif University of Technology ; Tayyebi Rahni, Mohammad (Supervisor)
Abstract
Jet into cross-flow interaction is one of the complex and fundamental problems in fluids dynamics and heat transfer, which is observed in various applications, such as pollutant discharges, film cooing of turbine blades, combustion chamber design of jet engines, trust vectoring systems, boundary layer control, and vertical short take-off and landing (VSTOL) aircrafts. One of the applications of this kind of flow is injection of supersonic jet into subsonic compressible cross-flow, which is used in trust vectoring systems of missiles. In this research, the two-dimensional interactions of supersonic jet into subsonic compressible cross-flow were investigated as two cases: "without a fin" and...
Computational Simulation of a 2D Sloshing Flow in a Rectangular Tank with Baffle, Using LBM
, M.Sc. Thesis Sharif University of Technology ; Tayyebi Rahni, Mohammad (Supervisor)
Abstract
In the this study, a numerical simulation of two-dimensional incompressible sloshing flow in a rectangular tank with baffle(s), using Lattice Boltzmann Method (LBM) is presented. Finite difference LBM and two-phase "Lee" model were used. The potential form of intermolecular forces is utilized to guarantee the stability of the numerical scheme and the discretization of the solution domain is performed by a two dimensional structured grid. Two different distribution functions are applied to obtain pressure, momentum, and composition of the particles. Furthermore, the Boltzmann transport equation is discretized, by using standard D2Q9 method. The "dropl" test case is simulated by the present...
Pore-scale Simulation of Flow around a Micro-porous Square Cylinder, Using Hybrid LBM-FVM, Considering Slip Condition Inside Porous Media
, M.Sc. Thesis Sharif University of Technology ; Tayyebi Rahni, Mohammad (Supervisor)
Abstract
In recent years, application of porous media is highlighted among researchers due to their wider use in micro-scale problems, such as in gas reservoirs, micro-filtering, and heat exchangers. In such applications, accurate description of flow behavior, using governing equations based on continuum assumption, is not valid, since mean free path has the same order as the characteristic length of the problem. In such cases, imposing appropriate slip condition on the fluid-solid interface of porous media (in pore-scale level), based on kinetics theory, is an appropriate approach. For this purpose, pore-scale simulation of flow inside porous media in slippery and transient regimes is carried out...
Two-phase Flow Modeling of Drop Impact on Moving Surfaces, Using Multiphase Lattice Boltzmann Flux Solver
, Ph.D. Dissertation Sharif University of Technology ; Tayyebi Rahni, Mohammad (Supervisor)
Abstract
Various situations of drop impact on solid surfaces occur widely in natural phenomena and industrial applications, as well as involve in the development of some new technologies, such as, 3D printers, interfacial materials, microfluidics, and biotechnology. Therefore, the relevant investigations have been increasing considerably in the last two decades. Most of these studies are related to the simple case of vertical drop impact on horizontal stationary surfaces, while in most cases vertical/oblique drop impact on horizontal/inclined stationary/moving surfaces in the absence/presence of a crossflow and their various combinations occur. One of the most important situations is drop impact on...
Optimization of Airfoil Design Using Low-dimensional POD Method
, M.Sc. Thesis Sharif University of Technology ; Tayyebi Rahni, Mohammad (Supervisor)
Abstract
The aim of this research was investigation, development and application of lowdimensional proper orthogonal decomposition method for simulation of flow field and airfoil design. Sine analytical methods have low accuracy and limitations and also experimental methods have other problems, researchers usually use computational approach, which mostly do not have acceptable efficiency and speeds of computational. The idea of application of reduced order modeling which originally comes from control theories and structural analysis, have attracted many researcher in recent years. In this research, we also used POD and flow data to obtain a fast module of aerodynamic airfoil design. The goals of...
Neuromorphic multiple-fault diagnosing system based on plant dynamic characteristics
, Article Industrial and Engineering Chemistry Research ; Volume 52, Issue 36 , 2013 , Pages 12927-12936 ; 08885885 (ISSN) ; Boozarjomehry, R. B ; Shahrokhi, M ; Sharif University of Technology
2013
Abstract
In many cases, multiple-fault diagnosis of plant-wide systems based on steady-state data is impossible. To solve this problem, a new diagnosis strategy based on neural networks has been proposed. In the suggested framework, the neural network is used as the diagnoser trained by a hybrid set of steady and dynamic characteristic data of the system. The dynamic characteristic data include overshoot and undershoot values of measured variables and their corresponding occurrence times. To evaluate its performance, the proposed scheme was used in the diagnosis of the concurrent faults of the Tennessee Eastman (TE) process. Various combinations of concurrent faults were considered in this...
Algebraic Sets and Their Minimal Polynomials in a Division Ring, a General Setting
, M.Sc. Thesis Sharif University of Technology ; Mahdavi-Hezavehi, Mohammad (Supervisor)
Abstract
A Weddernurn polynomial over a division ring K, is the minimal polynomial of an algebraic subset of K. Such a polynomial, always is a product of linear factors over K, but not all such products are Wedderburn polynomials, even if these linear factors are distinct. In this thesis, we give some properties and characterizatios of Wedderburn polynomials over the division ring K, which relates deeply to algebraic subsets of K. We work in the general setting of Ore skew polynomials with an indeterminate t over K, corresponding to S,D, where S is an endomorphism of K and D is an S-derivation over K. Also we give a survey of the structure of the skew polynomial ring K[t; S; D] and its relation with...