Sharif Digital Repository

We propose two minimum-mean-square-error (MMSE) estimation methods for denoising non-Gaussian first-order autoregressive (AR(1)) processes. The first one is based on the message passing framework and gives the exact theoretic MMSE estimator. The second is an iterative algorithm that combines standard wavelet-based thresholding with an optimized non-linearity and cycle-spinning. This method is more computationally efficient than the former and appears to provide the same optimal denoising results in practice. We illustrate the superior performance of both methods through numerical simulations by comparing them with other well-known denoising schemes  

In this study a steady-state equivalent circuit for a brushless doubly fed machine (BDFM), based upon earlier work, is introduced which takes account of core losses. Based upon some loss approximations, simple relationships have been derived, which show that the synchronous mode operation, in terms of core loss, of the BDFM is similar to the cascaded doubly fed machine. The slip-dependence of core loss resistances in the equivalent circuit has been investigated by applying energy conservation to derive machine steady-state torque-speed relations in the presence of core loss. Experimental speed measurements of the BDFM in the simple induction mode were used to identify the core loss... 

The brushless doubly fed induction generator has been proposed for use in wind turbines as a more reliable alternative to the more commonly used doubly fed induction generator. To realize the commercial promises of the brushless doubly fed induction generator in this role, it must meet the existing grid connection codes, particularly with respect to low-voltage ride-through. In this article, the application of series dynamic resistors is proposed to enhance brushless doubly fed induction generator low-voltage ride-through capability, and the required analysis is provided. Three locations for series dynamic resistors are suggested in the brushless doubly fed induction generator circuit and... 

This paper discusses the dynamic behavior of the brushless doubly fed induction generator during the grid faults which lead to a decrease in the generator's terminal voltage. The variation of the fluxes, back EMFs, and currents are analyzed during and after the voltage dip. Furthermore, two alternative approaches are proposed to improve the generator ride-through capability using crowbar and series dynamic resistor circuits. Appropriate values for their resistances are calculated analytically. Finally, the coupled circuit model and the generator's speed and reactive power controllers are simulated to validate the theoretical results and the effectiveness of the proposed solutions. Moreover,... 

In this study, the steady-state operation of the brushless doubly-fed machine (BDFM) in various modes is physically elaborated and the active power flow and torque analysis are presented for each operating mode alongside confirmatory experimental results on a 4/8 pole D160 size machine. The machine behaviour in asynchronous operating modes is described similar to the conventional induction machines with corresponding pole numbers. Moreover, its performance in synchronous mode is shown to be similar to synchronous machines. On the basis of the above, the BDFM performance is further analysed under two possible fault conditions: first, a controller or converter fault leading to loss of... 

Multiple input multiple output (MIMO) radar is known for its superiority over conventional radar due to its antenna and waveform diversity. Although higher angular resolution, improved parameter identifiability, and better target detection are achieved, the hardware costs (due to multiple transmitters and multiple receivers) and high energy consumption (multiple pulses) limit the usage of MIMO radars in large scale networks. On one hand, higher angle and velocity estimation accuracy is required, but on the other hand, a lower number of antennas/pulses is desirable. To achieve such a compromise, in this work, the Cram'er-Rao lower bound (CRLB) for the angle and velocity estimator is employed... 

Multiple-input multiple-output (MIMO) radar is known for its superiority over conventional radar due to its antenna and waveform diversity. Although higher angular resolution, improved parameter identifiability, and better target detection are achieved, the hardware costs (due to multiple transmitters and multiple receivers) and high-energy consumption (multiple pulses) limit the usage of MIMO radars in large scale networks. On one hand, higher angle and velocity estimation accuracy is required, but on the other hand, a lower number of antennas/pulses is desirable. To achieve such a compromise, in this paper, the Cramér-Rao lower bound (CRLB) for the angle and velocity estimator is employed... 

This article offers a holistic model and approach on reliability assessment of conventional isolated multiswitch pulsewidth modulation dc-dc (IMSDC-DC) power electronic converters with conventional half-bridge, full-bridge, and push-pull dc-dc topologies. The proposed reliability assessment analytics encapsulate correlated effects of several conditions (e.g., open- and short-circuit faults) and prevailing parameters (e.g., duty cycle, input voltage, output power, transformer turns ratio, voltage gain, switching frequency, operation time duration, and components characteristics) on the overall reliability performance of IMSDC-DC converters. Such insights are then harnessed within a Markov... 

This article proposes a compressed-domain signal processing (CSP) multiple-input multiple-output (MIMO) radar, a MIMO radar approach that achieves substantial sample complexity reduction by exploiting the idea of CSP. CSP MIMO radar involves two levels of data compression followed by target detection at the compressed domain. First, compressive sensing is applied at the receive antennas, followed by a Capon beamformer, which is designed to suppress clutter. Exploiting the sparse nature of the beamformer output, a second compression is applied to the filtered data. Target detection is subsequently conducted by formulating and solving a hypothesis testing problem at each grid point of the... 

The brushless doubly fed induction generator (BDFIG) has been proposed as a viable alternative in wind turbines to the commonly used doubly fed induction generator (DFIG). The BDFIG retains the benefits of the DFIG, i.e. variable speed operation with a partially rated converter, but without the use of brush gear and slip rings, thereby conferring enhanced reliability. As low voltage ride-through (LVRT) performance of the DFIG-based wind turbine is well understood, this paper aims to analyze LVRT behavior of the BDFIG-based wind turbine in a similar way. In order to achieve this goal, the equivalence between their two-axis model parameters is investigated. The variation of flux linkages,... 

In this article, a new soft switching isolated push-pull dc-dc converter using a three-winding transformer is proposed. The proposed hybrid resonant and pulse width modulated converter employs a conventional push-pull structure in the primary side, a voltage doubler in the secondary side, and a bidirectional switch besides the transformer, altogether help offering a high efficiency over a wide range of input and output voltage signals with an unsophisticated fixed-frequency control mechanism. The primary-side switches are commutated under zero voltage switching with low switching current and the secondary-side diodes are commutated under zero current switching. In this article, we first... 

With the rising penetration of wind power into electric power systems, more accurate and comprehensive studies are required to identify the interaction between wind farm(s) and power system. This requires accurate models of different types of wind turbine-generators. This paper describes modeling and small signal analysis of a grid connected fixed speed wind turbine generator (FSWTG). A complete model of FSWTG is derived and some reduced-order models are deduced. Eigenvalues and participation factors of the system for these models are calculated. Then, using the eigen analysis results, the models are compared and the simplifying assumptions which have been considered in the literatures are... 

Multiple input multiple output (MIMO) radar is known for its superiority over conventional radar due to its antenna and waveform diversity. However, the increased hardware cost (due to multiple transmitters and receivers), power consumption (due to multiple transmitters and pulses), and computational complexity (due to numerous pulses) form the drawbacks of MIMO radar. On one hand, a higher estimation accuracy is required, but on the other hand, a lower number of active antennas/pulses is desirable. Therefore, in this paper, by proposing a convex optimization approach for the general case of transmitter-receiver-pulse selection, we will minimize the total number of active antennas/pulses in...